SHELL脚本实现分区

写一个脚本（前提：请为虚拟机新增一块硬盘，架设它为/dev/sdb）,为指定的硬盘创建分区

1，列出当前系统上所有的磁盘，让用户选择，如果选择quit则退出脚本；如果用户选择错误，就让用户重新选择

2，档用户选择后，提醒用户确认接下来的操作可能会损坏数据，并请用户确认：如果用户选择y就继续，n就退出；否则，让用户重新选择；

3，抹除那块硬盘上的所有分区(提示，抹除所有分区后执行sync命令，并让脚本睡眠3秒后在分区)，并为其创建三个主分区，第一个为20M，第二个为512M，第三个为128M，切第三个为swap分区类型；(提示：将分区命令通过echo传给fdisk即可实现)

#!/bin/bash
#
echo "Initial a disk..."
echo -e "\033[31mWarning:\033[0m"
fdisk -l > /dev/null | grep -o "^Disk /dev/[sh]d[a-z]"

read -p "Your Choose:" PARTDISK
if [ $PARTDISK == 'quit' ];then
echo "quit"
exit ;
fi
until fdisk -l > /dev/null | grep -o "Disk /dev/[sh]d[a-z]" | grep "^Disk $PARTDISK$" &> /dev/null;do
read -p "Wrong option,Your choice aging:" PARTDISK
done
read -p "will destroy all data,continue:" CHOICE
until [ $CHOICE == 'y' -o $CHOICE == 'n' ];do
read -p "Will destroy all data,continue:" CHOICE
done
if [ $CHOICE == 'n' ];then
echo "QUIT"
exit ;
else
dd if=/dev/zero of=$PARTDISK bs= count= &> /dev/null
sync
sleep
echo 'n
p

+20M
n
p

+512M
n
p

n
p

+128M
t

w' | fdisk $PARTDISK &> /dev/null
partprobe $PARTDISK
sync
sleep
mke2fs -j ${PARTDISK} &> /dev/null
mke2fs -j ${PARTDISK} &> /dev/null
mkswap ${PARTDISK} &> /dev/null
fi

执行过程：

[root@localhost ~]# ./partdisk.sh
Initial a disk...
Warning:
Disk /dev/sda
Disk /dev/sdb
Disk /dev/sdc
Disk /dev/sdd
Your Choose:/dev/sdb
will destroy all data,continue:y
+ records in
+ records out
 bytes ( B) copied, 0.0304787 s, 16.8 kB/s
[root@localhost ~]# fdisk -l

Disk /dev/sda: 21.5 GB,  bytes
 heads,  sectors/track,  cylinders
Units = cylinders of  *  =  bytes
Sector size (logical/physical):  bytes /  bytes
I/O size (minimum/optimal):  bytes /  bytes
Disk identifier: 0x00051800

   Device Boot      Start         End      Blocks   Id  System
/dev/sda1   *                                Linux
Partition  does not end on cylinder boundary.
/dev/sda2                                 Linux swap / Solaris
Partition  does not end on cylinder boundary.
/dev/sda3                              Linux

Disk /dev/sdb: 21.5 GB,  bytes
 heads,  sectors/track,  cylinders
Units = cylinders of  *  =  bytes
Sector size (logical/physical):  bytes /  bytes
I/O size (minimum/optimal):  bytes /  bytes
Disk identifier: 0x18756792

   Device Boot      Start         End      Blocks   Id  System
/dev/sdb1                                 +    Linux
/dev/sdb2                                    Linux
/dev/sdb3                              +    Linux swap / Solaris

Disk /dev/sdc: 21.5 GB,  bytes
 heads,  sectors/track,  cylinders
Units = cylinders of  *  =  bytes
Sector size (logical/physical):  bytes /  bytes
I/O size (minimum/optimal):  bytes /  bytes
Disk identifier: 0x00000000

Disk /dev/sdd: 21.5 GB,  bytes
 heads,  sectors/track,  cylinders
Units = cylinders of  *  =  bytes
Sector size (logical/physical):  bytes /  bytes
I/O size (minimum/optimal):  bytes /  bytes
Disk identifier: 0x00000000

[root@localhost ~]# mount /dev/sdb1 /mnt
[root@localhost ~]# ls /mnt
lost+found
[root@localhost ~]# vi partdisk.sh
[root@localhost ~]# umount /mnt