Boke光纤交换机的snmp配置

今天我配置了一下Boke光纤交换机e-300的snmp trap的配置

　敲击help命令你会发现配置snmp的命令共有四个

snmpconfig                      Configure SNMP
snmpmibcapset              Set options for configuring SNMP Mib/Trap Capability
snmpmibcapshow          Show SNMP Mib/Trap Configuration
snmptraps                        Configure SNMP traps

我这里只需要配置trap事件，故只需要使用一个命令就是snmpconfig这个命令，这个命令的格式如下

Usage: snmpConfig  [--show | --set | --default] [snmpv1 | snmpv3 | accessControl | mibCapability | systemGroup | secLevel]

我这里设置snmpv1版

＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝

swd77:admin> snmpconfig --set snmpv1

SNMP community and trap recipient configuration:
Community (rw): [Secret C0de] public
Trap Recipient's IP address : [0.0.0.0] 10.0.1.83
Trap recipient Severity level : (0..5) [0] 0
Trap recipient Port : (0..65535) [162] 
Community (rw): [OrigEquipMfr] public
Trap Recipient's IP address : [0.0.0.0] 10.0.1.83
Trap recipient Severity level : (0..5) [0]  
Trap recipient Port : (0..65535) [162] 
Community (rw): [private] public
Trap Recipient's IP address : [0.0.0.0] 10.0.1.83
Trap recipient Severity level : (0..5) [0] 
Trap recipient Port : (0..65535) [162] 
Community (ro): [public] public
Trap Recipient's IP address : [0.0.0.0] 10.0.1.83
Trap recipient Severity level : (0..5) [0] 
Trap recipient Port : (0..65535) [162] 
Community (ro): [common] public
Trap Recipient's IP address : [0.0.0.0] 10.0.1.83
Trap recipient Severity level : (0..5) [0] 
Trap recipient Port : (0..65535) [162] 
Community (ro): [FibreChannel] public
Trap Recipient's IP address : [0.0.0.0] 10.0.1.83
Trap recipient Severity level : (0..5) [0] 
Trap recipient Port : (0..65535) [162] 
Committing configuration.....done.
＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝

这里已经显示配置完成！

再使用发送命令进行测试：

＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝

swd77:admin> snmptraps --send -ip_address 10.0.1.83
Number of traps sent : 21

＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝

发送完成，如果不配置直接使用以上命令，那就会出现以下错误

＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝

swd77:admin> snmpTraps --send  -ip_address 10.0.1.83
Trap receiver ip address not configured: 10.0.1.83