安装:MAC环境下使用brew进行安装      brew  install  httping

使用参数:

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
-g url         url (e.g. -g http://localhost/)
-h hostname hostname (e.g. localhost)
-p portnr portnumber (e.g. 80)
-x host:port hostname+portnumber of proxyserver
-c count how many times to connect
-i interval delay between each connect, can be only smaller than 1 if user is root
-t timeout timeout (default: 30s)
-Z ask any proxies on the way not to cache the requests
-Q use a persistent connection. adds a 'C' to the output if httping had to reconnect
-6 use IPv6
-s show statuscodes
-S split time in connect-time and processing time
-G do a GET request instead of HEAD (read the
contents of the page as well)
-b show transfer speed in KB/s (use with -G)
-B like -b but use compression if available
-L x limit the amount of data transferred (for -b)
to 'x' (in bytes)
-X show the number of KB transferred (for -b)
-l connect using SSL
-z show fingerprint (SSL)
-f flood connect (no delays)
-a audible ping
-m give machine parseable output (see
also -o and -e)
-o rc,rc,... what http results codes indicate 'ok'
coma seperated WITHOUT spaces inbetween
default is 200, use with -e
-e str string to display when http result code
doesn't match
-I str use 'str' for the UserAgent header
-R str use 'str' for the Referer header
-r resolve hostname only once (usefull when
pinging roundrobin DNS: also takes the first
DNS lookup out of the loop so that the first
measurement is also correct)
-n warn,crit Nagios-mode: return 1 when avg. response time
>= warn, 2 if >= crit, otherwhise return 0
-N x Nagios mode 2: return 0 when all fine, 'x'
when anything failes
-y ip[:port] bind to ip-address (and thus interface) [/port]
-q quiet, only returncode
-A Activate Basic authentication
-U Username needed for authentication
-P Password needed for authentication
-C cookie=value Add a cookie to the request
-V show the version

应用示例:

1
2
3
4
5
6
7
8
9
10
11
httping -S -G -s -b -c 5 www.qq.com
PING www.qq.com:80 (www.qq.com):
connected to 125.39.127.25:80 (285 bytes), seq=0 time=38.88+723.79=762.67 ms 200 OK 381KB/s
connected to 125.39.207.172:80 (285 bytes), seq=1 time=35.89+729.76=765.64 ms 200 OK 378KB/s
connected to 111.161.48.38:80 (285 bytes), seq=2 time=34.50+1231.31=1265.82 ms 200 OK 219KB/s
connected to 111.161.48.39:80 (285 bytes), seq=3 time=39.15+779.30=818.45 ms 200 OK 355KB/s
connected to 111.161.48.52:80 (285 bytes), seq=4 time=42.51+763.95=806.46 ms 200 OK 364KB/s
--- www.qq.com ping statistics ---
5 connects, 5 ok, 0.00% failed
round-trip min/avg/max = 762.7/883.8/1265.8 ms
Transfer speed: min/avg/max = 219/340/381 KB

http链接的性能测试工具httping的更多相关文章

  1. 在MacBook下安装http链接的性能测试工具httping

    一.如果没有brew,先安装brew. 安装命令如下:curl -LsSf http://github.com/mxcl/homebrew/tarball/master | sudo tar xvz  ...

  2. 性能测试工具 wrk 安装与使用

    介绍 今天给大家介绍一款开源的性能测试工具 wrk,简单易用,没有Load Runner那么复杂,他和 apache benchmark(ab)同属于性能测试工具,但是比 ab 功能更加强大,并且可以 ...

  3. 给CentOS6.3 + PHP5.3 安装PHP性能测试工具 XHProf-0.9.2

    一.什么是XHProf XHProf官网:http://pecl.php.net/package/xhprof XHProf是一个分层PHP性能分析工具.它报告函数级别的请求次数和各种指标,包括 阻塞 ...

  4. 服务端性能测试工具校验v1.1

    服务端性能测试工具校验v1.1 更新说明: 1.精简CRT运行库支持. 2.添加响应模拟测试,校验压力测试工具的响应时间统计准确性. 3.大并发请求请降低延迟时间 WEIMJSAM原创,转载请注明出处 ...

  5. 服务端性能测试工具校验v1.0

    性能测试工具对服务端进行并发测试时,如果工具本身问题或异常就会造成真实并发与实际并发有差距,要测试10000/S并发的性能结果实际到达服务端的并发达不到95%,这样的测试无效. 所以给大家共享,我做的 ...

  6. Ceph性能测试工具和方法。

    0. 测试环境 同 Ceph 的基本操作和常见故障排除方法 一文中的测试环境. 1. 测试准备 1.1 磁盘读写性能 1.1.1 单个 OSD 磁盘写性能,大概 165MB/s. root@ceph1 ...

  7. 理解 OpenStack + Ceph (8): 基本的 Ceph 性能测试工具和方法

    本系列文章会深入研究 Ceph 以及 Ceph 和 OpenStack 的集成: (1)安装和部署 (2)Ceph RBD 接口和工具 (3)Ceph 物理和逻辑结构 (4)Ceph 的基础数据结构 ...

  8. 给Windows + Apache 2.2 + PHP 5.3 安装PHP性能测试工具 xhprof_0.10.3_php53_vc9.dll

    1.下载XHProf 到这里 http://dev.freshsite.pl/php-extensions/xhprof.html 下载Windows版本的XHProf,我这里选择下载 XHProf ...

  9. 网络性能测试工具iperf详细使用图文教程

      Iperf是一个网络性能测试工具.Iperf可以测试TCP和UDP带宽质量.Iperf可以测量最大TCP带宽,具有多种参数和UDP特性. Iperf可以报告带宽,延迟抖动和数据包丢失.利用Iper ...

随机推荐

  1. 《Look Mom, I don’t use Shellcode》议题解析

    0x0 前言 <Look Mom, I don’t use Shellcode>是2016年Syscan360上讲过的一个议题,这个议题的副标题是"Browser Exploit ...

  2. Java编程的逻辑 (6) - 如何从乱码中恢复 (上)?

    ​本系列文章经补充和完善,已修订整理成书<Java编程的逻辑>,由机械工业出版社华章分社出版,于2018年1月上市热销,读者好评如潮!各大网店和书店有售,欢迎购买,京东自营链接:http: ...

  3. 解决导入Android例子时“Unable to resolve target 'android-x' ”的错误

    今天导入一个Android的例子程序,出现了Unable to resolve target 'android-2' 的错误. 最后google之后才发现原来是 ADK版本 :---API Level ...

  4. spark优化:spark.serializer修改序列化方式

    进行节点的数据传递,或者保存数据时都会进行序列化.spark默认的是org.apache.spark.serializer.JavaSerializer.而我们要修改成org.apache.spark ...

  5. 关于spark ui中executor显示的内存量与设置的内存量不符的问题

    executor显示的内存量是实际执行程序使用的内存量,也就是排除bspark.storage.memoryFraction设置的比例外,然后使用的内存量. 默认是0.6,所以executory和dr ...

  6. All Friends 极大团

    搞懂了什么是团  什么是极大团  什么是最大团 极大团就是  不是任何团的真子集  最大团就是点数最多的极大团 这题就是求极大团的个数 用bk算法 #include <iostream> ...

  7. 2017 JUST Programming Contest 2.0 题解

    [题目链接] A - On The Way to Lucky Plaza 首先,$n>m$或$k>m$或$k>n$就无解. 设$p = \frac{A}{B}$,$ans = C_{ ...

  8. Vue之双向绑定原理动手记

    Vue.js的核心功能有两个:一是响应式的数据绑定系统,二是组件系统.本文是通过学习他人的文章,从而理解了双向绑定原理,从而在自己理解的基础上,自己动手实现数据的双向绑定. 目前几种主流的mvc(vm ...

  9. Vue.js学以致用之遇到的那些坑

    前段时间的react授权许可的闹剧告诉大家一个问题,只有自己的东西用着才放心.各大巨头也逐渐明白使用自家东西的优势.本来vue的生态就愈加火热,这次的闹剧无疑又加速了vue的发展.当下,国内越来越多的 ...

  10. Eclipse设置之:代码注释/server 控制台输出乱码解决

    1           Eclipse设置 Configure clean up style The location is here: And the configuration should fo ...