NOTES :  A Model of Gas Exchange for Hyperpolarized Xe(129) Magnetic Resonance of the Lung 

背景知识:

Gas exchange is the essential function of the lung. In general, a lung can be viewed as a porous medium(多孔介质) consisting of capillary(毛细管) circuits with blood flowing inside. The blood flows are separated from the air spaces by several layers of tissues, including epithelium(组织上皮细胞), endothelium(内皮),and interstitium(小间隙).These tissues together are called air–blood barrier.(空气血液栅栏).At equilibrium, gas molecules in the alveolar spaces(肺泡空间) are under constant exchange with those dissolved in the barrier and capillary blood.

Remark: 气体由肺泡扩散浓度自高处向低处,平衡状态时,以常数速率和溶解在组织和毛细管血管的气体交换.

Almost all pulmonary diseases can be attributed to deficient gas exchange or delivery in the lung.

气体交换不足或者过量均会导致肺部疾病,联系5个肺部关键参数。

Prob: How measure gas exchange?

Ans:  However, none of the established imaging techniques provides direct measurement of gas exchange!!!

没有直接的方法,间接实验。

Exp.1   computerized tomography ( 断层摄影技术 ) measures tissue density

Exp.2  magnetic resonance imaging of hyperpolarized (HP)

He (超极化氦气) images the air spaces in the lung.

Exp.3  MR of HP Xe is capable of providing direct measurements of gas exchange in the lung. As a contrast

agent, not only does xenon yield dramatically enhanced

MR signals in the air spaces, but it also dissolves into lung tissue and blood. As the dissolved xenon in blood follows the same physiological pathways of the normal blood gases (i.e., O2,CO2)  (参看下面的图)

量化:

Quantification of dissolved xenon dynamics will lead to a quantified understanding of lung function.

(How? M.R. experiment)

原理:

A particular feature of xenon that permits such a study, is that the xenon dissolved into human lung exhibits two large chemical shifts from the resonance frequency(共振频率) of the free xenon gas—one at 197 ppm(parts per million), for xenon in lung tissue and blood plasma(血浆) (TP xenon), the other at 217 ppm, for the xenon in the red blood cells (RBC xenon)

RBC :Red Blood Cell

TP :  Tissue and Plasma(组织和血浆)

Xenon   ---->  Dissolved Xenon +Free Xenon

Dissolved Xenon  =      TP Xe  +    PBC Xe

197ppm:    xenon in lung tissue and blood plasma(血浆)

217ppm:    the xenon in the red blood cells

核磁共振具体实验技术暂不知。

CSSR has been used frequently, over the past years in various lung diseases, including fibrosis(纤维变性) and emphysema (肺气肿).

Despite the previous applications of CSSR, there has not been a satisfactory theory to interpret xenon uptake dynamics for both dissolved xenon peaks in the lung.

density M_d within the septum(隔膜), perpendicular(垂直的) to the blood flow

M_d is density of dissolved xenon

M_f is the density of free xenon gas (at 0 ppm) in the air spaces

D  is the diffusion coefficient of dissolved xenon

\lambda is the Ostwald solubility of xenon in lung parenchyma(软细胞组织)

Prob: How to define the boundary value conditions?

Apply Fourier’s separation of variable obtain series solution:

Where T is the xenon-exchange time constant in the lung

(That is   Par.4)

Proof:

。。。。。。。。

初边值问题的数值解(张文生book):

级数解渐进:

Assume:

S_A  is  the total surface area of air space

V_g  is  total volume of the air spaces in the lung

The dissolved xenon signal is proportional to M_d *S_A/2

The free xenon gas signal is proportional to M_f * V_g

The normalized signal distribution S_d(x, t) for dissolved xenon can be written as (WHY? Normalized)

和 (4)式进行对比  compare with (4).

S_d=  M_d SVR / 2M_f

S_A / V_g is the surface-area-to-volume ratio

(That is Par.1 SVR)

S_d1(t): The Total Signal From The Tissue

(组织中xenon 信号)

It is not difficult to derive (6)--->(7),.calculated as the spatial integral of S_d in Eq.6 over the two regions from (0) to (\delta) and from (d–\delta) to (d).

Where,b is the normalization factor (dimensionless), and \delta/d is what we call barrier-to-septum ratio.

(That is Par.2 BSR)

The dissolved xenon signal from the blood (‘‘blood xenon’’) is more difficult to calculate owing to flow.

S_d2(s): The Total Signal From Blood  (No-flow & flow )

(总血液中Xenon 信号)

No flow : integral of S_d at (\delta ,d-\delta)

How is consider blood flow? (Key)

The total xenon signal from the blood is:

Where t_X is pulmonary capillary transit time

(Par.5 运输时间)

To calculate the xenon signal in tissue and blood plasma, e.g., TP xenon signal S_TP(t) at 197 ppm, and signal of RBC xenon S_RBC(t) at 217 ppm, we let h denote the fraction of RBC xenon relative to total xenon in blood

S_PBC = h * S_d2

S_blood plasma =(1-h) * S_d2

S_TP = S_d1 + (1-h) * S_d2(组织和血浆信号)

The hematocrit  (HCT)  can be calculated from h using

(Par.3 血细胞比容)

Where \lambda_RBC and \lambda_P are Ostwald solubilities of xenon in RBCs and plasma, respectively.

Remark : How calculate h ? MR of HP Xe

上面建立的理论模型,实验信号可观测到(不同的肺部疾病),接下来拟合需要的五个参数与正常的对比下???

文章选取了肺部处于四种不同的状态。

Remark:

COPD (Chronic Obstructive Pulmonary Disease)慢性阻塞肺病

Fibrosis                  纤维病变

Anemia                   贫血

正常健康人的参数:

\lambda       0.2

\delta      2

d           10

SVR         250

T            40

\eta         0.5

t_X        1.6

NOTES : A Model of Gas Exchange for Hyperpolarized Xe(129) Magnetic Resonance of the Lung的更多相关文章

  1. Notes(一)

    Numerous experimental measurements in spatially complex systems have revealed anomalous diffusion in ...

  2. RFC3261--sip

    本文转载自 http://www.ietf.org/rfc/rfc3261.txt 中文翻译可参考 http://wenku.baidu.com/view/3e59517b1711cc7931b716 ...

  3. ML—随机森林·1

    Introduction to Random forest(Simplified) With increase in computational power, we can now choose al ...

  4. pm剩余要看的内容

    1. thermal profiles tuning, customize thermal daemon for different thermal usage model 2.gas gauge d ...

  5. .net平台的rabbitmq使用封装

    前言 RabbitMq大家再熟悉不过,这篇文章主要整对rabbitmq学习后封装RabbitMQ.Client的一个分享.文章最后,我会把封装组件和demo奉上. Rabbitmq的运作 从下图可以看 ...

  6. R语言︱XGBoost极端梯度上升以及forecastxgb(预测)+xgboost(回归)双案例解读

    XGBoost不仅仅可以用来做分类还可以做时间序列方面的预测,而且已经有人做的很好,可以见最后的案例. 应用一:XGBoost用来做预测 ------------------------------- ...

  7. Asp.NetCore轻松学-实现一个轻量级高可复用的RabbitMQ客户端

    前言 本示例通过对服务订阅的封装.隐藏细节实现.统一配置.自动重连.异常处理等各个方面来打造一个简单易用的 RabbitMQ 工厂:本文适合适合有一定 RabbitMQ 使用经验的读者阅读,如果你还没 ...

  8. android的USB MTP && USB CDC/USBnet(ECM, NCM, ACM) && USB gardget

    MTP的全称是Media Transfer Protocol(媒体传输协议),它是微软公司提出的一套媒体文件传输协议.早在智能手机普及前,数码相机和MP3播放器等都使用了MTP的前身PTP(Pictu ...

  9. EIT: where is it now and what lies ahead?

    EIT: where is it now and what lies ahead? Electrical impedance tomography (EIT) is an emerging clini ...

随机推荐

  1. easyui返回数据类型

    /** * 我申请的事项List * * @param personalParamVo * @param pagePara * @return */ @ResourceMapping("my ...

  2. C语言动态生成二维数组

    # 动态创建二维数组示例 #include "stdlib.h" #include "stdio.h" #include <malloc.h> in ...

  3. 基于注解的SpringMVC整合JPA

    转载位置:http://www.blogjava.net/sxyx2008/archive/2010/11/02/336768.html 实体类 Department package com.sj.b ...

  4. 安装php 带debug

    gdb安装包   在CentOS6.4下使用gdb进行调试的时候, 使用bt(breaktrace)命令时,会弹出如下的提示: 头一天提示: Missing separate debuginfos, ...

  5. bzoj3196

    平衡树系列终于完结,撒花 裸的树套树,扔代码跑 ; ..] of longint; son:..,..] of longint; a,root:..*] of longint; i,n,m,x,y,k ...

  6. sencha touch tabsidebar 源码扩展

    先上图看效果 没错,这是一个sencha touch 项目,而这里的右边推出效果(下文叫做tabsiderbar),使用插件tabsiderbar来扩展的. 插件js下载地址:http://www.m ...

  7. jsp请求由servlet响应的方式

    一.登录页面主要代码:login.jsp<%@ page language="java" import="java.util.*" pageEncodin ...

  8. Socket编程(九)

    此为网络编程的一个系列,后续会把内容补上.....

  9. EF Code First学习笔记 初识Code First

    Code First是Entity Framework提供的一种新的编程模型.通过Code First我们可以在还没有建立数据库的情况下就开始编码,然后通过代码来生成数据库. 下面通过一个简单的示例来 ...

  10. mkimage的-a 和 –c参数和内核引导

    目录 一.mkimage工具简介二.-a参数与-e参数和内核引导的关系三.实例测试 3.1 -a参数与-e参数相同,可以将内核下载到SDRAM的任何地址,然后从这启动 3.2 -a参数与-e参数不同, ...