linux下（fdisk,gdisk,parted）三种分区工具比较
1 2种分区结构简介
MBR分区
- 硬盘主引导记录MBR由4个部分组成
- 主引导程序（偏移地址0000H--0088H），它负责从活动分区中装载，并运行系统引导程序。
- 出错信息数据区，偏移地址0089H--00E1H为出错信息，00E2H--01BDH全为0字节。
- 分区表（DPT,Disk Partition Table）含4个分区项，偏移地
- 址01BEH--01FDH,每个分区表项长16个字节，共64字节为分区项1、分区项2、分区项3、分区项4
- 结束标志字，偏移地址01FE--01FF的2个字节值为结束标志55AA
GPT分区
- GPT:GUID（Globals Unique Identifiers） partitiontable 支持128个分区，使用64位，支持8Z（512Byte/block ）64Z （ 4096Byte/block）
- 使用128位UUID(Universally Unique Identifier) 表示磁盘和分区 GPT分区表自动备份在头和尾两份，并有CRC校验位
- UEFI (统一扩展固件接口)硬件支持GPT，使操作系统启动
2 fdisk的使用
2.1 fdisk命令的基础
[root@centos7 mnt]$ dd if=/dev/fdisk /dev/sdb
Welcome to fdisk (util-linux 2.23.). Changes will remain in memory only, until you decide to write them.
Be careful before using the write command. Device does not contain a recognized partition table
Building a new DOS disklabel with disk identifier 0xc0e6470d. Command (m for help): m
Command action
a toggle a bootable flag # 切换可启动标志
b edit bsd disklabel # 编辑磁盘标记
c toggle the dos compatibility flag # 切换dos兼容标志
d delete a partition # 删除一个分区
g create a new empty GPT partition table # 创建一个空的GPT分区表
G create an IRIX (SGI) partition table # 创建一个IRIX分区表
l list known partition types # 列出已知的分区类型
m print this menu # 打印菜单
n add a new partition # 添加一个分区
o create a new empty DOS partition table # 创建一个空的DOS分区表
p print the partition table # 打印分区表
q quit without saving changes # 退出不保存
s create a new empty Sun disklabel # 创建一个空的sun磁盘标签
t change a partition's system id # 改变一个分区的类型
u change display/entry units # 改变显示的单位
v verify the partition table # 验证分区表
w write table to disk and exit # 写分区表并退出
x extra functionality (experts only) # 高级功能 Command (m for help):
2.2 fdisk实战
例子： 使用fdisk工具给/dev/sdb（100G）分区满足下面几个要求
- 3个主分区一个扩展分区
- /dev/sdb1分区类型为Linux LVM，大小为30G
- /dev/sdb2分区类型为swap，大小为20G
- /dev/sdb3分区类型为Linux， 大小为10G
- /dev/sdb5分区类型为linux,大小为10G
- 保留40G留作后用
[root@centos7 mnt]$ fdisk /dev/sdb
Welcome to fdisk (util-linux 2.23.). Changes will remain in memory only, until you decide to write them.
Be careful before using the write command. Device does not contain a recognized partition table
Building a new DOS disklabel with disk identifier 0x2fd8d812. Command (m for help): n
Partition type:
p primary ( primary, extended, free)
e extended
Select (default p): p
Partition number (-, default ):
First sector (-, default ):
Using default value
Last sector, +sectors or +size{K,M,G} (-, default ): +30G
Partition of type Linux and of size GiB is set Command (m for help): n
Partition type:
p primary ( primary, extended, free)
e extended
Select (default p): p
Partition number (-, default ):
First sector (-, default ):
Using default value
Last sector, +sectors or +size{K,M,G} (-, default ): +20G
Partition of type Linux and of size GiB is set Command (m for help): n
Partition type:
p primary ( primary, extended, free)
e extended
Select (default p): p
Partition number (,, default ):
First sector (-, default ):
Using default value
Last sector, +sectors or +size{K,M,G} (-, default ): +10G
Partition of type Linux and of size GiB is set Command (m for help): n
Partition type:
p primary ( primary, extended, free)
e extended
Select (default e): e
Selected partition
First sector (-, default ):
Using default value
Last sector, +sectors or +size{K,M,G} (-, default ):
Using default value
Partition of type Extended and of size GiB is set Command (m for help): n
All primary partitions are in use
Adding logical partition
First sector (-, default ):
Using default value
Last sector, +sectors or +size{K,M,G} (-, default ): +10G
Partition of type Linux and of size GiB is set Command (m for help): p Disk /dev/sdb: 107.4 GB, bytes, sectors
Units = sectors of * = bytes
Sector size (logical/physical): bytes / bytes
I/O size (minimum/optimal): bytes / bytes
Disk label type: dos
Disk identifier: 0x2fd8d812 Device Boot Start End Blocks Id System
/dev/sdb1 Linux
/dev/sdb2 Linux
/dev/sdb3 Linux
/dev/sdb4 Extended
/dev/sdb5 Linux Command (m for help): t
Partition number (-, default ):
Hex code (type L to list all codes): L Empty NEC DOS Minix / old Lin bf Solaris
FAT12 Hidden NTFS Win Linux swap / So c1 DRDOS/sec (FAT-
XENIX root Plan Linux c4 DRDOS/sec (FAT-
XENIX usr 3c PartitionMagic OS/ hidden C: c6 DRDOS/sec (FAT-
FAT16 <32M Venix Linux extended c7 Syrinx
Extended PPC PReP Boot NTFS volume set da Non-FS data
FAT16 SFS NTFS volume set db CP/M / CTOS / .
HPFS/NTFS/exFAT 4d QNX4.x Linux plaintext de Dell Utility
AIX 4e QNX4.x 2nd part 8e Linux LVM df BootIt
AIX bootable 4f QNX4.x 3rd part Amoeba e1 DOS access
a OS/ Boot Manag OnTrack DM Amoeba BBT e3 DOS R/O
b W95 FAT32 OnTrack DM6 Aux 9f BSD/OS e4 SpeedStor
c W95 FAT32 (LBA) CP/M a0 IBM Thinkpad hi eb BeOS fs
e W95 FAT16 (LBA) OnTrack DM6 Aux a5 FreeBSD ee GPT
f W95 Ext'd (LBA) 54 OnTrackDM6 a6 OpenBSD ef EFI (FAT-12/16/
OPUS EZ-Drive a7 NeXTSTEP f0 Linux/PA-RISC b
Hidden FAT12 Golden Bow a8 Darwin UFS f1 SpeedStor
Compaq diagnost 5c Priam Edisk a9 NetBSD f4 SpeedStor
Hidden FAT16 < SpeedStor ab Darwin boot f2 DOS secondary
Hidden FAT16 GNU HURD or Sys af HFS / HFS+ fb VMware VMFS
Hidden HPFS/NTF Novell Netware b7 BSDI fs fc VMware VMKCORE
AST SmartSleep Novell Netware b8 BSDI swap fd Linux raid auto
1b Hidden W95 FAT3 DiskSecure Mult bb Boot Wizard hid fe LANstep
1c Hidden W95 FAT3 PC/IX be Solaris boot ff BBT
1e Hidden W95 FAT1 Old Minix
Hex code (type L to list all codes): 8e
Changed type of partition 'Linux' to 'Linux LVM' Command (m for help): t
Partition number (-, default ):
Hex code (type L to list all codes):
Changed type of partition 'Linux' to 'Linux swap / Solaris' Command (m for help): p Disk /dev/sdb: 107.4 GB, bytes, sectors
Units = sectors of * = bytes
Sector size (logical/physical): bytes / bytes
I/O size (minimum/optimal): bytes / bytes
Disk label type: dos
Disk identifier: 0x2fd8d812 Device Boot Start End Blocks Id System
/dev/sdb1 8e Linux LVM
/dev/sdb2 Linux swap / Solaris
/dev/sdb3 Linux
/dev/sdb4 Extended
/dev/sdb5 Linux
Command (m for help): w
The partition table has been altered! Calling ioctl() to re-read partition table.
Syncing disks.
3 gdisk的使用
3.1 gdisk的命令基础
[root@centos7 mnt]$ gdisk /dev/sdb
GPT fdisk (gdisk) version 0.8. Partition table scan:
MBR: MBR only
BSD: not present
APM: not present
GPT: not present ***************************************************************
Found invalid GPT and valid MBR; converting MBR to GPT format.
THIS OPERATION IS POTENTIALLY DESTRUCTIVE! Exit by typing 'q' if
you don't want to convert your MBR partitions to GPT format!
*************************************************************** Command (? for help): ?
b back up GPT data to a file # 备份一个gpt数据到文件
c change a partition's name # 改变分区名
d delete a partition # 删除一个分区
i show detailed information on a partition # 显示一个分区的详细信息
l list known partition types # 列出已知的分区类型
n add a new partition # 添加一个新的分区
o create a new empty GUID partition table (GPT) # 创建一个空的GUID分区表
p print the partition table # 打印分区表
q quit without saving changes # 退出不保存
r recovery and transformation options (experts only) # 专家模式
s sort partitions # 排序分区
t change a partition's type code # 改变分区类型
v verify disk # 验证磁盘
w write table to disk and exit # 写磁盘并退出
x extra functionality (experts only) # 额外功能（专家模式）
? print this menu # 打印菜单 Command (? for help):
3.2gdisk实战
例子： 使用gdisk工具给/dev/sdb（100G）分区满足下面几个要求
- GPT分区
- /dev/sdb1分区类型为Linux LVM，大小为30G
- /dev/sdb2分区类型为swap，大小为20G
- /dev/sdb3分区类型为Linux， 大小为10G
- /dev/sdb4分区类型为linux,大小为10G
- 保留40G留作后用
上面我们对/dev/sdb已经分区了， 使用如下命令清空
[root@centos7 mnt]$ dd if=/dev/zero of=/dev/sdb bs= count=512 #清空分区的前512字节，分区表被清空，小心操作
[root@centos7 mnt]$ gdisk /dev/sdb
GPT fdisk (gdisk) version 0.8. Partition table scan:
MBR: protective
BSD: not present
APM: not present
GPT: present Found valid GPT with protective MBR; using GPT. Command (? for help): p
Disk /dev/sdb: sectors, 100.0 GiB
Logical sector size: bytes
Disk identifier (GUID): 04F07BAC-C3A6-44BC-8D27-90A198C1C3B2
Partition table holds up to entries
First usable sector is , last usable sector is
Partitions will be aligned on -sector boundaries
Total free space is sectors (100.0 GiB) Number Start (sector) End (sector) Size Code Name Command (? for help): n
Partition number (-, default ):
First sector (-, default = ) or {+-}size{KMGTP}:
Last sector (-, default = ) or {+-}size{KMGTP}: +30G
Current type is 'Linux filesystem'
Hex code or GUID (L to show codes, Enter = ): L
Microsoft basic data 0c01 Microsoft reserved Windows RE
Windows LDM data Windows LDM metadata IBM GPFS
7f00 ChromeOS kernel 7f01 ChromeOS root 7f02 ChromeOS reserved
Linux swap Linux filesystem Linux reserved
8e00 Linux LVM a500 FreeBSD disklabel a501 FreeBSD boot
a502 FreeBSD swap a503 FreeBSD UFS a504 FreeBSD ZFS
a505 FreeBSD Vinum/RAID a580 Midnight BSD data a581 Midnight BSD boot
a582 Midnight BSD swap a583 Midnight BSD UFS a584 Midnight BSD ZFS
a585 Midnight BSD Vinum a800 Apple UFS a901 NetBSD swap
a902 NetBSD FFS a903 NetBSD LFS a904 NetBSD concatenated
a905 NetBSD encrypted a906 NetBSD RAID ab00 Apple boot
af00 Apple HFS/HFS+ af01 Apple RAID af02 Apple RAID offline
af03 Apple label af04 AppleTV recovery af05 Apple Core Storage
be00 Solaris boot bf00 Solaris root bf01 Solaris /usr & Mac Z
bf02 Solaris swap bf03 Solaris backup bf04 Solaris /var
bf05 Solaris /home bf06 Solaris alternate se bf07 Solaris Reserved
bf08 Solaris Reserved bf09 Solaris Reserved bf0a Solaris Reserved
bf0b Solaris Reserved c001 HP-UX data c002 HP-UX service
ed00 Sony system partitio ef00 EFI System ef01 MBR partition scheme
ef02 BIOS boot partition fb00 VMWare VMFS fb01 VMWare reserved
fc00 VMWare kcore crash p fd00 Linux RAID
Hex code or GUID (L to show codes, Enter = ): 8e00
Changed type of partition to 'Linux LVM' Command (? for help): n
Partition number (-, default ):
First sector (-, default = ) or {+-}size{KMGTP}:
Last sector (-, default = ) or {+-}size{KMGTP}: +20G
Current type is 'Linux filesystem'
Hex code or GUID (L to show codes, Enter = ):
Changed type of partition to 'Linux swap' Command (? for help): n
Partition number (-, default ):
First sector (-, default = ) or {+-}size{KMGTP}:
Last sector (-, default = ) or {+-}size{KMGTP}: +10G
Current type is 'Linux filesystem'
Hex code or GUID (L to show codes, Enter = ):
Changed type of partition to 'Linux filesystem' Command (? for help): n
Partition number (-, default ):
First sector (-, default = ) or {+-}size{KMGTP}:
Last sector (-, default = ) or {+-}size{KMGTP}: +10G
Current type is 'Linux filesystem'
Hex code or GUID (L to show codes, Enter = ):
Changed type of partition to 'Linux filesystem' Command (? for help): p
Disk /dev/sdb: sectors, 100.0 GiB
Logical sector size: bytes
Disk identifier (GUID): 04F07BAC-C3A6-44BC-8D27-90A198C1C3B2
Partition table holds up to entries
First usable sector is , last usable sector is
Partitions will be aligned on -sector boundaries
Total free space is sectors (30.0 GiB) Number Start (sector) End (sector) Size Code Name
30.0 GiB 8E00 Linux LVM
20.0 GiB Linux swap
10.0 GiB Linux filesystem
10.0 GiB Linux filesystem Command (? for help): w Final checks complete. About to write GPT data. THIS WILL OVERWRITE EXISTING
PARTITIONS!! Do you want to proceed? (Y/N): y
OK; writing new GUID partition table (GPT) to /dev/sdb.
The operation has completed successfully.
3 parted使用
3.1 parted命令基础
[root@centos7 mnt]$ parted --help
Usage: parted [OPTION]... [DEVICE [COMMAND [PARAMETERS]...]...]
Apply COMMANDs with PARAMETERS to DEVICE. If no COMMAND(s) are given, run in
interactive mode. OPTIONs:
-h, --help displays this help message
-l, --list lists partition layout on all block devices
-m, --machine displays machine parseable output
-s, --script never prompts for user intervention
-v, --version displays the version
-a, --align=[none|cyl|min|opt] alignment for new partitions COMMANDs:
align-check TYPE N check partition N for TYPE(min|opt)
alignment
help [COMMAND] print general help, or help on
COMMAND
mklabel,mktable LABEL-TYPE create a new disklabel (partitionM # 设置分区类型 详细使用man获取
table)
mkpart PART-TYPE [FS-TYPE] START END make a partition # 创建一个分区 start,end为M，详细信息使用man获取
name NUMBER NAME name partition NUMBER as NAME
print [devices|free|list,all|NUMBER] display the partition table, # 打印信息
available devices, free space, all found partitions, or a particular
partition
quit exit program # 退出
rescue START END rescue a lost partition near START # 救援一个丢失的分区
and END
rm NUMBER delete partition NUMBER # 删除一个分区
select DEVICE choose the device to edit # 选择一个分区去编辑
disk_set FLAG STATE change the FLAG on selected device # 改变选择分区的标记
disk_toggle [FLAG] toggle the state of FLAG on selected # 切换选择分区的标记
device
set NUMBER FLAG STATE change the FLAG on partition NUMBER # 改变指定分区号的标记
toggle [NUMBER [FLAG]] toggle the state of FLAG on partition # 切换指定分区号的标记
NUMBER
unit UNIT set the default unit to UNIT # 设置默认单位
version display the version number and # 显示版本
copyright information of GNU Parted Report bugs to bug-parted@gnu.org
3.2 parted实战
- GPT分区
- /dev/sdb1分区类型为Linux LVM，大小为30G
- /dev/sdb2分区类型为swap，大小为20G
- /dev/sdb3分区类型为Linux， 大小为10G
- /dev/sdb4分区类型为linux,大小为10G
- 保留40G留作后用
[root@centos7 mnt]$ parted -s /dev/sdb mklabel gpt
[root@centos7 mnt]$ parted -s /dev/sdb unit GB mkpart primary set lvm on
[root@centos7 mnt]$ parted -s /dev/sdb unit GB mkpart primary set swap on
[root@centos7 mnt]$ parted -s /dev/sdb unit GB mkpart primary
[root@centos7 mnt]$ parted -s /dev/sdb unit GB mkpart primary
[root@centos7 mnt]$ parted -s /dev/sdb print
4 三种分区的比较
- fdisk只能用于MBR分区，gdisk,parted可以用于GPT分区。
- fdisk大多数运维工作人员已经习惯这个交互模式。
- parted命令在创建删除分区使用命令比较方便，但是功能不是太完善，没有备份还原命令。
- gdisk在分区上命令和fdisk风格一样， 使用方便，学习难度低且功能强大，推荐使用。
linux下（fdisk,gdisk,parted）三种分区工具比较的更多相关文章
- linux下安装mysql的三种方法：rpm包安装、yum安装、源码包安装
1 安装MySQL数据库服务器安装方法一://查询系统自带的数据库rpm -qa | grep -i mysql //卸载查询到的所有mysqlrpm -e --nodeps mysql-libs-5 ...
- centos Linux下磁盘管理 parted,df ,du,fdisk,partprobe,mkfs.ext4,mount,/etc/fstab,fsck,e2fsck,mk2efs,tmpfs ,nr_inodes, LVM,传统方式扩容文件系统 第七节课
centos Linux下磁盘管理 parted,df ,du,fdisk,partprobe,mkfs.ext4,mount,/etc/fstab,fsck,e2fsck,mk2efs,tmpf ...
- Linux就这个范儿 第15章 七种武器 linux 同步IO: sync、fsync与fdatasync Linux中的内存大页面huge page/large page David Cutler Linux读写内存数据的三种方式
Linux就这个范儿 第15章 七种武器 linux 同步IO: sync.fsync与fdatasync Linux中的内存大页面huge page/large page David Cut ...
- Linux就这个范儿 第18章 这里也是鼓乐笙箫 Linux读写内存数据的三种方式
Linux就这个范儿 第18章 这里也是鼓乐笙箫 Linux读写内存数据的三种方式 P703 Linux读写内存数据的三种方式 1.read ,write方式会在用户空间和内核空间不断拷贝数据, ...
- linux下软件安装的几种方式
linux下软件安装的几种方式(主要有源码安装, rpm安装, yum安装). 一:源码安装 几乎所有的开源软件都支持在Linux下运行,而这些软件一般都以源码形式发放,只需要Linux安装了gcc. ...
- Ubuntu下安装程序的三种方法（转）
引言 在Ubuntu当中,安装应用程序我所知道的有三种方法,分别是apt-get,dpkg安装deb和make install安装源码包三种.下面针对每一种方法各举例来说明. 一.apt-get方法 ...
- 【转】Linux下软件安装的几种方式
转自Linux下软件安装的几种方式 Linux 系统的/usr目录 Linux 软件安装到哪里合适,目录详解 Linux 的软件安装目录是也是有讲究的,理解这一点,在对系统管理是有益的 /usr:系统 ...
- Linux 下操作GPIO（两种方法，驱动和mmap）（转载）
目前我所知道的在Linux下操作GPIO有两种方法: 1．编写驱动,这当然要熟悉Linux下驱动的编写方法和技巧,在驱动里可以使用ioremap函数获得GPIO物理基地址指针,然后使用这个指针根据io ...
- Linux下进程通信的八种方法
Linux下进程通信的八种方法:管道(pipe),命名管道(FIFO),内存映射(mapped memeory),消息队列(message queue),共享内存(shared memory),信号量 ...
随机推荐
- C++输出
setiosflags 意思就是设置输入输出的标志iso::fixed 是操作符setiosflags 的参数之一,该参数指定的动作是以带小数点的形式表示浮点数,并且在允许的精度范围内尽可能的把数字移 ...
- 安装使用eclipse
安装使用eclipse 目标 java学习需要,老师说要安装eclipse,,其实已经下了IDEA了,不过还是听老师的比较好( 准备 jre 也就是java运行环境,因为之前就下了jdk(里面包含jr ...
- remote: HTTP Basic: Access denied fatal: Authentication failed for'https'
问题原因: 重置了密码导致git操作失败. 解决方案: 输入:git config --system --unset credential.helper 再次进行git操作,输入用户名,密码.
- Spring源码学习-容器BeanFactory(二) BeanDefinition的创建-解析前BeanDefinition的前置操作
写在前面 上文 Spring源码学习-容器BeanFactory(一) BeanDefinition的创建-解析资源文件主要讲Spring容器创建时通过XmlBeanDefinitionReader读 ...
- 【ASP】response和sever对象实现用户登录
1.问题提出 设计两个登录界面:一个register.asp页面用于输入账号,密码等信息进行登录.另一个页面welcome.asp用于显示登录成功的信息.利用request的两个对象response和 ...
- mysql uodate 报错 You can't specify target table '**' for update in FROM clause
You can't specify target table 'sc' for update in FROM clause 背景:把“sc”表中“叶平”老师教的课的成绩都更改为此课程的平均成绩: 上面 ...
- sv时序组合和时序逻辑
input a; input b; input c; reg d; wire e; reg f; // 时序逻辑,有寄存器 always@(posedge clk)begin 'b1)begin d ...
- MyEclipse 10 报错记录
1. js文件:右键 >> MyEclipse >> Exclude From Validation 2. Servlet 警告:Window ==> Preferenc ...
- json格式 （JavaScipt Object Notation）
json格式 json语法规则: 01.对象表现形式 key:value 键值对 02.如果有多个数据,之间使用逗号隔开 k1:v1,k2:v2 03.把对象写在大括号中 var student={a ...
- jenkins：一键回滚站点集群
最近在学习jenkins过程中整理了大量资料,都收录在<jenkins自动化工具使用教程>,但依然缺少一些具体实现细节. 这篇文章,介绍jenkins做集群回滚时的两个设计方案,让一键回滚 ...