说明本文环境  WLS_HOME=/home/weblogic/Oracle/Middleware

创建一个domian   第一种方法通过console 创建>

[weblogic@11g Middleware]$ cd /home/weblogic/Oracle/Middleware/wlserver_10.3/common/bin
[weblogic@11g bin]$ ll
total 112
-rwxr-x---. 1 weblogic weblogic 22872 Nov  6 03:25 commEnv.sh
-rwxr-x---. 1 weblogic weblogic  2129 Nov  6 03:25 config_builder.sh
-rwxr-x---. 1 weblogic weblogic  2281 Nov  6 03:25 config.sh
-rwxr-x---. 1 weblogic weblogic  2586 Nov  6 03:25 pack.sh
-rwxr-x---. 1 weblogic weblogic  2150 Nov  6 03:25 setPatchEnv.sh
-rwxr-x---. 1 weblogic weblogic  4089 Nov  6 03:25 startDerby.sh
-rwxr-x---. 1 weblogic weblogic  4095 Nov  6 03:25 startManagedWebLogic.sh
-rwxr-x---. 1 weblogic weblogic  1455 Nov  6 03:25 stopDerby.sh
-rwxr-x---. 1 weblogic weblogic  2094 Nov  6 03:25 unpack.sh
-rwxr-x---. 1 weblogic weblogic  3305 Nov  6 03:25 upgrade.sh
-rwxr-x---. 1 weblogic weblogic 31224 Nov  6 03:25 wlscontrol.sh
-rwxr-x---. 1 weblogic weblogic 13740 Nov  6 03:24 wlsifconfig.sh
-rwxr-x---. 1 weblogic weblogic   791 Nov  6 03:25 wlst.sh
[weblogic@11g bin]$ ./config.sh
Unable to instantiate GUI, defaulting to console mode.

<-------------------------- fusion="" middleware="" configuration="" wizard="" --------------------------="">

Welcome:
--------

Choose between creating and extending a domain. Based on your selection, the Configuration 
Wizard guides you through the steps to generate a new or extend an existing domain.

 ->1|Create a new WebLogic domain
    |    Create a WebLogic domain in your projects directory.  

   2|Extend an existing WebLogic domain
    |    Use this option to add new components to an existing domain and modify configuration 
    |settings. 

Enter index number to select OR [Exit][Next]> 1

<-------------------------- fusion="" middleware="" configuration="" wizard="" --------------------------="">

Select Domain Source:
---------------------

Select the source from which the domain will be created. You can create the domain by 
selecting from the required components or by selecting from a list of existing domain 
templates.

 ->1|Choose Weblogic Platform components
    |    You can choose the Weblogic component(s) that you want supported in your domain. 

   2|Choose custom template
    |    Choose this option if you want to use an existing  template. This could be a custom 
    |created template using the Template Builder. 

Enter index number to select OR [Exit][Previous][Next]> 

<-------------------------- fusion="" middleware="" configuration="" wizard="" --------------------------="">

Application Template Selection:
-------------------------------

 

    Available Templates
    |_____Basic WebLogic Server Domain - 10.3.6.0 [wlserver_10.3]x
    |_____Basic WebLogic SIP Server Domain - 10.3.6.0 [wlserver_10.3] [2] 
    |_____WebLogic Advanced Web Services for JAX-RPC Extension - 10.3.6.0 [wlserver_10.3] [3] 
    |_____WebLogic Advanced Web Services for JAX-WS Extension - 10.3.6.0 [wlserver_10.3] [4] 

Enter number exactly as it appears in brackets to toggle selection OR [Exit][Previous][Next]> 

<-------------------------- fusion="" middleware="" configuration="" wizard="" --------------------------="">

Edit Domain Information:
------------------------

    |  Name  |    Value    |
   _|________|_____________|
   1| *Name: | base_domain |

Enter value for "Name" OR [Exit][Previous][Next]> 

<-------------------------- fusion="" middleware="" configuration="" wizard="" --------------------------="">

Select the target domain directory for this domain:
---------------------------------------------------

    "Target Location" = [Enter new value or use default 
"/home/weblogic/Oracle/Middleware/user_projects/domains"]

Enter new Target Location OR [Exit][Previous][Next]> 

<-------------------------- fusion="" middleware="" configuration="" wizard="" --------------------------="">

Configure Administrator User Name and Password:
-----------------------------------------------

Create a user to be assigned to the Administrator role. This user is the default 
administrator used to start development mode servers.

    |          Name           |                  Value                  |
   _|_________________________|_________________________________________|
   1|         *Name:          |                weblogic                 |
   2|     *User password:     |                                         |
   3| *Confirm user password: |                                         |
   4|      Description:       | This user is the default administrator. |

Use above value or select another option:
    1 - Modify "Name"
    2 - Modify "User password"
    3 - Modify "Confirm user password"
    4 - Modify "Description"

Enter option number to select OR [Exit][Previous][Next]> 2

<-------------------------- fusion="" middleware="" configuration="" wizard="" --------------------------="">

Configure Administrator User Name and Password:
-----------------------------------------------

Create a user to be assigned to the Administrator role. This user is the default 
administrator used to start development mode servers.

    "*User password:" = []

Enter new *User password: OR [Exit][Reset][Accept]> 

<-------------------------- fusion="" middleware="" configuration="" wizard="" --------------------------="">

Configure Administrator User Name and Password:
-----------------------------------------------

Create a user to be assigned to the Administrator role. This user is the default 
administrator used to start development mode servers.

    |          Name           |                  Value                  |
   _|_________________________|_________________________________________|
   1|         *Name:          |                weblogic                 |
   2|     *User password:     |                ********                 |
   3| *Confirm user password: |                                         |
   4|      Description:       | This user is the default administrator. |

Use above value or select another option:
    1 - Modify "Name"
    2 - Modify "User password"
    3 - Modify "Confirm user password"
    4 - Modify "Description"
    5 - Discard Changes

Enter option number to select OR [Exit][Previous][Next]> 3       

<-------------------------- fusion="" middleware="" configuration="" wizard="" --------------------------="">

Configure Administrator User Name and Password:
-----------------------------------------------

Create a user to be assigned to the Administrator role. This user is the default 
administrator used to start development mode servers.

    "*Confirm user password:" = []

Enter new *Confirm user password: OR [Exit][Reset][Accept]> 

<-------------------------- fusion="" middleware="" configuration="" wizard="" --------------------------="">

Configure Administrator User Name and Password:
-----------------------------------------------

Create a user to be assigned to the Administrator role. This user is the default 
administrator used to start development mode servers.

    |          Name           |                  Value                  |
   _|_________________________|_________________________________________|
   1|         *Name:          |                weblogic                 |
   2|     *User password:     |                ********                 |
   3| *Confirm user password: |                ********                 |
   4|      Description:       | This user is the default administrator. |

Use above value or select another option:
    1 - Modify "Name"
    2 - Modify "User password"
    3 - Modify "Confirm user password"
    4 - Modify "Description"
    5 - Discard Changes

Enter option number to select OR [Exit][Previous][Next]> 

<-------------------------- fusion="" middleware="" configuration="" wizard="" --------------------------="">

Configure Administrator User Name and Password:
-----------------------------------------------

Create a user to be assigned to the Administrator role. This user is the default 
administrator used to start development mode servers.

    |          Name           |                  Value                  |
   _|_________________________|_________________________________________|
   1|         *Name:          |                weblogic                 |
   2|     *User password:     |                ********                 |
   3| *Confirm user password: |                ********                 |
   4|      Description:       | This user is the default administrator. |

Use above value or select another option:
    1 - Modify "Name"
    2 - Modify "User password"
    3 - Modify "Confirm user password"
    4 - Modify "Description"
    5 - Discard Changes

    ** CFGFWK-60050:  Property "Password" of User "weblogic" is invalid.
    ** CFGFWK-60455:  The password must be at least 8 alphanumeric characters with at least 
    ** one number or special character.

Enter option number to select OR [Exit][Previous][Next]> 

<-------------------------- fusion="" middleware="" configuration="" wizard="" --------------------------="">

Configure Administrator User Name and Password:
-----------------------------------------------

Create a user to be assigned to the Administrator role. This user is the default 
administrator used to start development mode servers.

    |          Name           |                  Value                  |
   _|_________________________|_________________________________________|
   1|         *Name:          |                weblogic                 |
   2|     *User password:     |                ********                 |
   3| *Confirm user password: |                ********                 |
   4|      Description:       | This user is the default administrator. |

Use above value or select another option:
    1 - Modify "Name"
    2 - Modify "User password"
    3 - Modify "Confirm user password"
    4 - Modify "Description"
    5 - Discard Changes

    ** CFGFWK-60050:  Property "Password" of User "weblogic" is invalid.
    ** CFGFWK-60455:  The password must be at least 8 alphanumeric characters with at least 
    ** one number or special character.

Enter option number to select OR [Exit][Previous][Next]> 

<-------------------------- fusion="" middleware="" configuration="" wizard="" --------------------------="">

Configure Administrator User Name and Password:
-----------------------------------------------

Create a user to be assigned to the Administrator role. This user is the default 
administrator used to start development mode servers.

    |          Name           |                  Value                  |
   _|_________________________|_________________________________________|
   1|         *Name:          |                weblogic                 |
   2|     *User password:     |                ********                 |
   3| *Confirm user password: |                ********                 |
   4|      Description:       | This user is the default administrator. |

Use above value or select another option:
    1 - Modify "Name"
    2 - Modify "User password"
    3 - Modify "Confirm user password"
    4 - Modify "Description"
    5 - Discard Changes

    ** CFGFWK-60050:  Property "Password" of User "weblogic" is invalid.
    ** CFGFWK-60455:  The password must be at least 8 alphanumeric characters with at least 
    ** one number or special character.

Enter option number to select OR [Exit][Previous][Next]> 

<-------------------------- fusion="" middleware="" configuration="" wizard="" --------------------------="">

Configure Administrator User Name and Password:
-----------------------------------------------

Create a user to be assigned to the Administrator role. This user is the default 
administrator used to start development mode servers.

    |          Name           |                  Value                  |
   _|_________________________|_________________________________________|
   1|         *Name:          |                weblogic                 |
   2|     *User password:     |                ********                 |
   3| *Confirm user password: |                ********                 |
   4|      Description:       | This user is the default administrator. |

Use above value or select another option:
    1 - Modify "Name"
    2 - Modify "User password"
    3 - Modify "Confirm user password"
    4 - Modify "Description"
    5 - Discard Changes

    ** CFGFWK-60050:  Property "Password" of User "weblogic" is invalid.
    ** CFGFWK-60455:  The password must be at least 8 alphanumeric characters with at least 
    ** one number or special character.

Enter option number to select OR [Exit][Previous][Next]> 2

<-------------------------- fusion="" middleware="" configuration="" wizard="" --------------------------="">

Configure Administrator User Name and Password:
-----------------------------------------------

Create a user to be assigned to the Administrator role. This user is the default 
administrator used to start development mode servers.

    "*User password:" = [********]

Enter new *User password: OR [Exit][Reset][Accept]> 

<-------------------------- fusion="" middleware="" configuration="" wizard="" --------------------------="">

Configure Administrator User Name and Password:
-----------------------------------------------

Create a user to be assigned to the Administrator role. This user is the default 
administrator used to start development mode servers.

    |          Name           |                  Value                  |
   _|_________________________|_________________________________________|
   1|         *Name:          |                weblogic                 |
   2|     *User password:     |                ********                 |
   3| *Confirm user password: |                ********                 |
   4|      Description:       | This user is the default administrator. |

Use above value or select another option:
    1 - Modify "Name"
    2 - Modify "User password"
    3 - Modify "Confirm user password"
    4 - Modify "Description"
    5 - Discard Changes

Enter option number to select OR [Exit][Previous][Next]> 3

<-------------------------- fusion="" middleware="" configuration="" wizard="" --------------------------="">

Configure Administrator User Name and Password:
-----------------------------------------------

Create a user to be assigned to the Administrator role. This user is the default 
administrator used to start development mode servers.

    "*Confirm user password:" = [********]

Enter new *Confirm user password: OR [Exit][Reset][Accept]> 

<-------------------------- fusion="" middleware="" configuration="" wizard="" --------------------------="">

Configure Administrator User Name and Password:
-----------------------------------------------

Create a user to be assigned to the Administrator role. This user is the default 
administrator used to start development mode servers.

    |          Name           |                  Value                  |
   _|_________________________|_________________________________________|
   1|         *Name:          |                weblogic                 |
   2|     *User password:     |                ********                 |
   3| *Confirm user password: |                ********                 |
   4|      Description:       | This user is the default administrator. |

Use above value or select another option:
    1 - Modify "Name"
    2 - Modify "User password"
    3 - Modify "Confirm user password"
    4 - Modify "Description"
    5 - Discard Changes

Enter option number to select OR [Exit][Previous][Next]> 

<-------------------------- fusion="" middleware="" configuration="" wizard="" --------------------------="">

Domain Mode Configuration:
--------------------------

Enable Development or Production Mode for this domain. 

 ->1|Development Mode

   2|Production Mode

Enter index number to select OR [Exit][Previous][Next]> 2

<-------------------------- fusion="" middleware="" configuration="" wizard="" --------------------------="">

Java SDK Selection:
-------------------

 ->1|JRockit SDK 1.6.0_29 @ /home/weblogic/Oracle/Middleware/jrockit_160_29_D1.2.0-10
   2|Sun SDK 1.6.0_29 @ /home/weblogic/Oracle/Middleware/jdk160_29
   3|Other Java SDK

Enter index number to select OR [Exit][Previous][Next]> 

<-------------------------- fusion="" middleware="" configuration="" wizard="" --------------------------="">

Select Optional Configuration:
------------------------------

   1|Administration Server [ ]
   2|Managed Servers, Clusters and Machines [ ]
   3|RDBMS Security Store [ ]

Enter index number to select OR [Exit][Previous][Next]> 1

<-------------------------- fusion="" middleware="" configuration="" wizard="" --------------------------="">

Select Optional Configuration:
------------------------------

   1|Administration Server [x]
   2|Managed Servers, Clusters and Machines [ ]
   3|RDBMS Security Store [ ]

Enter index number to select OR [Exit][Previous][Next]> 

<-------------------------- fusion="" middleware="" configuration="" wizard="" --------------------------="">

Configure the Administration Server:
------------------------------------

Each WebLogic Server domain must have one Administration Server. The Administration Server 
is used to perform administrative tasks.

    |       Name       |        Value        |
   _|__________________|_____________________|
   1|      *Name:      |     AdminServer     |
   2| *Listen address: | All Local Addresses |
   3|   Listen port:   |        7001         |
   4| SSL listen port: |         N/A         |
   5|   SSL enabled:   |        false        |

Use above value or select another option:
    1 - Modify "Name"
    2 - Modify "Listen address"
    3 - Modify "Listen port"
    4 - Modify "SSL enabled"

Enter option number to select OR [Exit][Previous][Next]> 

<-------------------------- fusion="" middleware="" configuration="" wizard="" --------------------------="">

Creating Domain...

0%          25%          50%          75%          100%
[------------|------------|------------|------------]
[***************************************************]

**** Domain Created Successfully! ****

[weblogic@11g bin]$ cd /home/weblogic/Oracle/Middleware/user_projects/domains/base_domain/bin
[weblogic@11g bin]$ ./startWebLogic.sh 
.
.
JAVA Memory arguments: -Xms512m -Xmx512m
.
WLS Start Mode=Production
.
CLASSPATH=/home/weblogic/Oracle/Middleware/patch_wls1036/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/home/weblogic/Oracle/Middleware/patch_ocp371/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/home/weblogic/Oracle/Middleware/jrockit_160_29_D1.2.0-10/lib/tools.jar:/home/weblogic/Oracle/Middleware/wlserver_10.3/server/lib/weblogic_sp.jar:/home/weblogic/Oracle/Middleware/wlserver_10.3/server/lib/weblogic.jar:/home/weblogic/Oracle/Middleware/modules/features/weblogic.server.modules_10.3.6.0.jar:/home/weblogic/Oracle/Middleware/wlserver_10.3/server/lib/webservices.jar:/home/weblogic/Oracle/Middleware/modules/org.apache.ant_1.7.1/lib/ant-all.jar:/home/weblogic/Oracle/Middleware/modules/net.sf.antcontrib_1.1.0.0_1-0b2/lib/ant-contrib.jar:/home/weblogic/Oracle/Middleware/wlserver_10.3/common/derby/lib/derbyclient.jar:/home/weblogic/Oracle/Middleware/wlserver_10.3/server/lib/xqrl.jar
.
PATH=/home/weblogic/Oracle/Middleware/wlserver_10.3/server/bin:/home/weblogic/Oracle/Middleware/modules/org.apache.ant_1.7.1/bin:/home/weblogic/Oracle/Middleware/jrockit_160_29_D1.2.0-10/jre/bin:/home/weblogic/Oracle/Middleware/jrockit_160_29_D1.2.0-10/bin:/usr/lib64/qt-3.3/bin:/usr/local/bin:/bin:/usr/bin:/usr/local/sbin:/usr/sbin:/sbin:/home/weblogic/bin
.
***************************************************
*  To start WebLogic Server, use a username and   *
*  password assigned to an admin-level user.  For *
*  server administration, use the WebLogic Server *
*  console at http://hostname:port/console        *
***************************************************
starting weblogic with Java version:
java version "1.6.0_29"
Java(TM) SE Runtime Environment (build 1.6.0_29-b11)
Oracle JRockit(R) (build R28.2.0-79-146777-1.6.0_29-20111005-1807-linux-ia32, compiled mode)
Starting WLS with line:
/home/weblogic/Oracle/Middleware/jrockit_160_29_D1.2.0-10/bin/java -jrockit   -Xms512m -Xmx512m -Dweblogic.Name=AdminServer -Djava.security.policy=/home/weblogic/Oracle/Middleware/wlserver_10.3/server/lib/weblogic.policy  -Dweblogic.ProductionModeEnabled=true   -da -Dplatform.home=/home/weblogic/Oracle/Middleware/wlserver_10.3 -Dwls.home=/home/weblogic/Oracle/Middleware/wlserver_10.3/server -Dweblogic.home=/home/weblogic/Oracle/Middleware/wlserver_10.3/server   -Dweblogic.management.discover=true  -Dwlw.iterativeDev=false -Dwlw.testConsole=false -Dwlw.logErrorsToConsole=false -Dweblogic.ext.dirs=/home/weblogic/Oracle/Middleware/patch_wls1036/profiles/default/sysext_manifest_classpath:/home/weblogic/Oracle/Middleware/patch_ocp371/profiles/default/sysext_manifest_classpath  weblogic.Server
 
 
 
 
 
Enter username to boot WebLogic server:weblogic
Enter password to boot WebLogic server:
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

_________________________________________________________________________________________________________________
   第二种方法 通过图形化界面创建>

使用config脚本创建：

config.sh 脚本所在的目录：

[apptest@vs022 bin]$ pwd
/u01/test/apps/fs2/FMW_Home/wlserver_10.3/common/bin

[apptest@vs022 bin]$ ls
commEnv.sh         pack.sh         startManagedWebLogic.sh  upgrade.sh      wlst.sh
config_builder.sh  setPatchEnv.sh  stopDerby.sh             wlscontrol.sh
config.sh          startDerby.sh   unpack.sh                wlsifconfig.sh

执行后，出现

输入密码：

选择为开发模式，选择适合的Java：

、

选择创建一个Admin server 然后再创建一个managed server：

设置监听端口：

添加一个managed server ：

后面创建cluster 和 machine先不管，直接next到：

然后就开始创建咯：

创建好之后，我们就可以在weblogic的domian目录下看到我们新创建的这个域：

启动这个域的管理控制台：

启动脚本：

在启动的过程中，会让你输入密码，这个密码文件实际上是存储在servers目录下，对应的的某个server的boot.properties文件，默认情况下，创建完admin server或者managed server都不会创建这个文件的，看以看下目录结构：

我们boot.properties文件中编辑如下内容：

username=weblogic1

password=manager1

然后保存，再次启动这个admin server的时候，就不需要输入用户名和密码了，也就是在此时，这个boot.properties会被重新加密。当你再次打开查看的时候就成了加密的文件了。

在启动的输入条目中，会看到有如下一行记录：

说明图形化创建请用博客：  http://blog.csdn.net/cymm_liu/article/details/25002097
————————————————————————————————————————————————————————————————————————

删除一个domian >

1.   
[weblogic@11g servers]$ rm -rf /home/weblogic/Oracle/Middleware/user_projects/domains/base_domain/

2.  
编辑domain-registry.xml文件 删除这个domain的配置信息
[weblogic@11g servers]$ vi  /home/weblogic/Oracle/Middleware/domain-registry.xml

<domain-registry xmlns="http://xmlns.oracle.com/weblogic/domain-registry">

删除红色部分

3.

删除位于\wlserver_10.3\common\nodemanager之下

nodemanager.domains中有关该domain的条目

#Domains and directories created by Configuration Wizard
#Fri Apr 06 13:09:46 CST 2012
base_domain=D\:\\Oracle\\middleware\\user_projects\\domains\\base_domain
bifoundation_domain=D\:\\Oracle\\middleware\\user_projects\\domains\\bifoundation_domain

删除红色部分

至此，domain已经彻底的被移除了。
 
注：删除domain不需要更改Metadata Service (MDS)

weblogic管理1——创建 和 删除一个domain的更多相关文章

  1. weblogic管理2 - 创建并启动一个managed server

    创建一个managed server. 1.  进入网页console管理页面,如:http://10.100.25.14:7001/console     , 先点击->服务器 (红色标记框) ...

  2. 35-Ubuntu-组管理-01-添加组/删除组/确认组信息

    组管理 提示: 创建组/删除组的终端命令都需要sudo执行,标准用户没有权限! 序号 命令 作用 01 sudo groupadd 组名 添加组 02 sudo groupdel 组名 删除组 03 ...

  3. Weblogic 12c 一个domain建多个server（端口）

    一.基本概念 我觉得如果刚接触Weblogic,首先应该做的是明白几个基本的概念,可以从一张图入手: 1. 域(domain) 它是一个基本管理单元: 每个域包含一个管理服务器(Administrat ...

  4. LINUX之根目录介绍、普通目录创建、删除、复制、移动、权限管理命令记录

    (一)Linux 系统目录结构 登录系统后,在当前命令窗口下输入命令:ls / /bin:bin是Binary的缩写, 这个目录存放着最经常使用的命令. /boot:这里存放的是启动Linux时使用的 ...

  5. [原创]java WEB学习笔记31：会话与状态管理 session机制 概述(定义，session机制，session的声明周期，保存session的方式，Session的创建与删除)

    本博客为原创:综合 尚硅谷(http://www.atguigu.com)的系统教程(深表感谢)和 网络上的现有资源(博客,文档,图书等),资源的出处我会标明 本博客的目的:①总结自己的学习过程,相当 ...

  6. 2. docker 容器的管理（创建、查看、启动、终止、删除）

    一.创建 docker create:创建容器,处于停止状态. centos:latest:centos容器:最新版本(也可以指定具体的版本号). 本地有就使用本地镜像,没有则从远程镜像库拉取. 创建 ...

  7. 从ACM中删除一个已经创建的Library

    从ACM中删除一个已经创建的Library,无法通过界面操作,须要手工从DB中删除.须要删除的表记录有: RECENTUPDATE 找到字段Name等于该libraryName的那条记录删除掉 del ...

  8. DROP DOMAIN - 删除一个用户定义的域

    SYNOPSIS DROP DOMAIN name [, ...] [ CASCADE | RESTRICT ] DESCRIPTION 描述 DROP DOMAIN 将从系统表中删除一个用户域. 只 ...

  9. Elasticsearch索引的操作，利用kibana(如何创建/删除一个es的索引？)

    我们已经通过索引一篇文档创建了一个新的索引 .这个索引采用的是默认的配置,新的字段通过动态映射的方式被添加到类型映射.现在我们需要对这个建立索引的过程做更多的控制:我们想要确保这个索引有数量适中的主分 ...

随机推荐

  1. 理解NSTypesetter 和 NSATSTypesetter

    先说通常意义上的typeset(排字.排版),然后再说NSTypesetter 和 NSATSTypesetter,最后是它们的区别. Typesetting is the composition o ...

  2. 自适应label的高度

    iOS7以下的系统可使用方法 //获得当前cell高度 CGRect frame = [self frame]; //文本赋值 self.introduction.text = text; //设置l ...

  3. （spring-第3回【IoC基础篇】）spring的依赖注入-属性、构造函数、工厂方法等的注入(基于XML)

    Spring要把xml配置中bean的属性实例化为具体的bean,"依赖注入"是关卡.所谓的"依赖注入",就是把应用程序对bean的属性依赖都注入到spring ...

  4. 技术分享：逆向海盗船k95机械键盘

    引文 在几年前我买了一个海盗船 K95 Vengeance机械键盘,键盘有上有背光功能,于是我在考虑是不是可以修改一下.但作者表示购买来的键盘上面没有很多的资料可供利用,需要注意的是,新版的K95与旧 ...

  5. UE正则表达式查找和替换（将【，；】）替换为换行

  6. Objective-c 命名规则

    1.方法名:第一个单词的首字母用小写,后面的单词首字母要大写<骆驼规则>,例如doSomething . doSomethingElse 2.类名:第一个单词的首字母要求大写,后面的单词首 ...

  7. 《more effective C++》条款10 防止构造函数里的资源泄露

    构造函数也可能发生内存泄露,考虑如下程序: class A { public: A(int *p) { if(p!=NULL) num=p; ); //do something } private: ...

  8. JavaScript数据结构——集合、字典和散列表

    集合.字典和散列表都可以存储不重复的值. 在集合中,我们感兴趣的是每个值本身,并把它当作主要元素.在字典和散列表中,我们用 [键,值] 的形式来存储数据. 集合(Set 类):[值,值]对,是一组由无 ...

  9. 织梦dedecms 用交叉栏目时arclist标签调用不出内容文章的问题(纯转载)

    本文转自:http://www.cnblogs.com/cnteam/articles/4056702.html 最近用了交叉栏目发现当为手动指定交叉栏目ID时用arclist标签不能调出相关文章最后 ...

  10. Think Python - Chapter 03 - Functions

    3.1 Function callsIn the context of programming, a function is a named sequence of statements that p ...