在Ubuntu 64位OS上运行hadoop2.2.0[重新编译hadoop]
最近在学习搭建Hadoop, 我们从Apache官方网站直接下载最新版本Hadoop2.2。官方目前是提供了linux32位系统可执行文件,结果运行时发现提示 “libhadoop.so.1.0.0 which might have disabled stack guard” 的警告。 Google了一下发现是因为 hadoop 2.2.0提供的是libhadoop.so库是32位的,而我们的机器是64位。 解决的办法就是重新在64位的机器上编译hadoop。
编译环境
OS: Ubuntu 12.04 64-bit
hadoop version: 2.2.0
Java: Jdk1.7.0_45
***********************************************
First. 在Ubuntu 64位OS上运行hadoop2.2.0[重新编译hadoop]
java环境配置
参考这篇文章:Ubuntu下安装jdk
************************************************
Second. 搭建小集群, 我用vmware workstation创建虚拟机,先创建一个,然后复制,稍微修改下
cloud001: NameNode ResouceManager (master)
cloud002: DataNode NodeManager
cloud003: DataNode NodeManager
cloud004: DataNode NodeManager
假定虚拟机的IP地址如下,后面会用到。
cloud001: 192.168.60.128 (master)
cloud002: 192.168.60.130 (slaver)
cloud003: 192.168.60.131 (slaver)
cloud004: 192.168.60.132 (slaver)
三台机器上创建相同的用户(这是Hadoop的基本要求)
在三台主机上分别设置:/etc/hosts 和/etc/hostname
hosts这个文件用于定义主机名和IP地址之间的映射关系。
127.0.0.1 localhost
192.168.60.128 cloud001
192.168.60.130 cloud002
192.168.60.131 cloud003
192.168.60.132 cloud004
/etc/hostname这个文件用于定义Ubuntu的主机名:如:cloud001(master)(或者slave1等)
************************************************
Third.下面安装ssh
3.1一般系统是默认安装了ssh命令的。如果没有,或者版本比较老,则可以重新安装:
sodu apt-get install ssh
3.2设置local无密码登陆
安装完成后会在~目录(当前用户主目录,即这里的/home/loull)下产生一个隐藏文件夹.ssh(ls -a 可以查看隐藏文件)。如果没有这个文件,自己新建即可(mkdir .ssh)。
注意:以上操作在每台机器上面都要进行。
接着在master(cloud001)上生成密钥并配置SSH无密码登录
具体步骤如下:
1、 进入.ssh文件夹
2、 ssh-keygen -t rsa 之后一路回车(产生秘钥)
3、 把id_rsa.pub 追加到授权的 key 里面去(cat id_rsa.pub >> authorized_keys)
4、 重启 SSH 服务命令使其生效
3.4 此时已经可以进行ssh的无密码登陆,查看是否可以从master主机无密码登录slave,输入命令:
$:ssh cloud002
$:ssh cloud003
$:ssh cloud003
*******************************************************
Forth.以上正确完成之后便可进入Hadoop的安装
以下操作以loull登录进行操作。
由于hadoop集群中每个机器上面的配置基本相同,所以我们先在namenode上面进行配置部署,然后再复制到其他节点。所以这里的安装过程相当于在每台机器上面都要执行。但需要注意的是集群中64位系统和32位系统的问题。
4.1、 下载并解压
hadoop-2.2.0.tar.gz
文件
将在64位机器上编译好的hadoop-2.2.0拷贝
到/home/loull/hadoop路径下。
配置/home/loull/hadoop/etc/hadoop/hadoop-env.sh
替换exportJAVA_HOME=${JAVA_HOME}为如下:
export JAVA_HOME=/opt/Java/jdk/jdk1.7 (以自己的jdk为准)
同样,配置
yarn-env.sh,在里面加入:
export JAVA_HOME=/opt/Java/jdk/jdk1.7 (以自己的jdk为准)
<?xml version="1.0" encoding="UTF-8"?>
<?xml-stylesheet type="text/xsl" href="configuration.xsl"?>
<!--
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License. See accompanying LICENSE file.
--> <!-- Put site-specific property overrides in this file. --> <configuration>
<property>
<name>fs.defaultFS</name>
<value>hdfs://cloud001:9000</value>
</property> <property>
<name>io.file.buffer.size</name>
<value>131072</value>
</property> <property>
<name>hadoop.tmp.dir</name>
<value>file:/home/loull/tmp</value>
<description>Abase foer other temporary directories.</description>
</property>
</configuration>
<?xml version="1.0" encoding="UTF-8"?>
<?xml-stylesheet type="text/xsl" href="configuration.xsl"?>
<!--
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License. See accompanying LICENSE file.
--> <!-- Put site-specific property overrides in this file. --> <configuration>
<property>
<name>dfs.namenode.secondary.http-address</name>
<value>cloud001:9001</value>
</property> <property>
<name>dfs.namenode.name.dir</name>
<value>file:/home/loull/dfs/name</value>
</property> <property>
<name>dfs.datanode.data.dir</name>
<value>file:/home/loull/dfs/data</value>
</property> <property>
<name>dfs.replication</name>
<value>3</value>
</property> <property>
<name>dfs.webhdfs.enabled</name>
<value>true</value>
</property>
</configuration>
4.3、YARN安装配置
配置etc/hadoop/yarn-site.xml文件内容:
<?xml version="1.0"?>
<!--
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License. See accompanying LICENSE file.
-->
<configuration> <!-- Site specific YARN configuration properties -->
<property>
<name>yarn.nodemanager.aux-services</name>
<value>mapreduce_shuffle</value>
</property> <property>
<name>yarn.nodemanager.aux-services.mapreduce.shuffle.class</name>
<value>org.apache.hadoop.mapred.ShuffleHandler</value>
</property> <property>
<name>yarn.resourcemanager.address</name>
<value>cloud001:8032</value>
</property> <property>
<name>yarn.resourcemanager.scheduler.address</name>
<value>cloud001:8030</value>
</property> <property>
<name>yarn.resourcemanager.resource-tracker.address</name>
<value>cloud001:8031</value>
</property> <property>
<name>yarn.resourcemanager.admin.address</name>
<value>cloud001:8033</value>
</property> <property>
<name>yarn.resourcemanager.webapp.address</name>
<value>cloud001:8088</value>
</property>
</configuration>
注意此配置的最后一个property的value值,只能是A-Za-z0-9_,不能以数字开头,否则可能造成nodemanager无法正常启动。
4.4.
配置文件slaves (这个文件里面保存所有slave节点)
写入以下内容:
cloud002
cloud003
cloud004
4.5 配置完成后,复制到其他节点(slave1,slave2),如下图
scp -r hadoop-2.2.0 cloud002:/home/loull/hadoop
注意:只需要原样复制即可,不必改动上面的xml配置文件。切记..
*******************************************************
可以在master结点上看到如下几个进程:
6638 Jps
6015 NameNode
6525 SecondaryNameNode
4264 Jps
4208 DataNode
$: bin/hadoop jar share/hadoop/mapreduce/hadoop-mapreduce-examples-2.2.0.jar randomwriter out
在Ubuntu 64位OS上运行hadoop2.2.0[重新编译hadoop]
Ubuntu系统(64位)下安装并配置Hadoop-2.2.0集群
Hadoop2.2.0安装配置手册!完全分布式Hadoop集群搭建过程~(心血之作啊~~)
Building Hadoop with Maven - “Failed to execute goal org.apache.maven.plugins:maven-antrun-plugin:1.6:run (create-testdirs)”
Ubuntu下安装jdk7
Hadoop YARN配置参数剖析(1)—RM与NM相关参数
在Ubuntu 64位OS上运行hadoop2.2.0[重新编译hadoop]的更多相关文章
- [转]C#程序无法在64位系统上运行之.NET编译的目标平台
今天将编译的C#的exe拷贝到测试机上(Win7_64bit),一运行就挂了,提示“stop working”,一开始怀疑测试机上没有安装.net framework框架,追究半天原来是编译的目标平台 ...
- 使 IIS 6.0 可以在 64 位 Windows 上运行 32 位应用程序 试图加载格式不正确的程序。
原文 使 IIS 6.0 可以在 64 位 Windows 上运行 32 位应用程序 试图加载格式不正确的程序. win7 64位操作系统上边运行IIS网站应用的时候,提示错误"试图加载格式 ...
- 32位vs2010的项目如何在64位系统上运行
64位注册 1. 关闭Visual Studio.2. 在Visual Studio Tools目录,以管理员身份运行Visual Studio Command Prompt (2010),[注:这个 ...
- 64位系统上运行32位程序能否申请到8G内存?
申请不到,因为64为系统在运行32位程序的时候只是为了向下兼容而已,对于32位程序来讲,申请8G的存储空间没有任何意义,因为32位的程序最大寻址空间只有4G,32位程序在编译之后的机器代码也只有32位 ...
- 当您在 64 位 Windows 上运行 Regsvr32.exe 时出现错误信息
尝试运行 Regsvr32.exe 注册在 64 位版本的 Windows 32 位动态链接库 (DLL) 时您会收到以下错误消息: 若要解决此问题,从 %SystemRoot%\Syswow64 文 ...
- 解决C#的64位打包程序,在64位机器上运行出现BadImageFormatException异常。
转载自:http://msdn.microsoft.com/zh-cn/library/system.badimageformatexception%28v=vs.100%29.aspx BadIma ...
- 让32位Eclipse和64位Eclipse同时在64的Windows7上运行
转自让32位Eclipse和64位Eclipse同时在64的Windows7上运行 参考这篇文章:http://wenku.baidu.com/view/57994c270066f5335a81214 ...
- Ubuntu 64位安装32位运行库
sudo apt-get install ia32-libs 32-64sudo apt-get install libc6:i386sudo apt-get install librt:i386su ...
- 64位Win7下运行ASP+Access网站的方法
64位Win7下运行ASP+Access网站的方法 近日系统升级为WIN7 64位之后,突然发现原本运行正常的ASP+ACCESS网站无法正常连接数据库. 网上搜索多次,终于解决了问题,总结了几条经验 ...
随机推荐
- PHP报错: Can't use method return value in write context
$dp_id = $this->getParam('dpId'); if(!empty($this->getParam('dpId'))) { $this->smarty->a ...
- 使用php作linux自动执行脚本
使用php作linux自动执行脚本 [来源] 达内 [编辑] 达内 [时间]2013-03-21 在作社区时, 时常需要统计上线人数等数据. 一般做法是, 把这段代码放在用户 login或者 ...
- 设计模式学习系列9 外观模式Facade
1.概述 自己卖了一辆越野自行车,但毕竟不是自己定制的,买回来之后可能需要更改一下脚蹬,座皮,里程计数器或者刹车系统,假如将自行车看做一个整体系统,对我们而言使用的是自行车,然后我们对自己车构件的修改 ...
- 制作支持UEFI PC的Server2008 R2系统安装U盘
下载R2系统 ISO ed2k://|file|cn_windows_server_2008_r2_standard_enterprise_datacenter_and_web_with_sp1_x6 ...
- Bootstrap 输入框和导航组件
一.输入框组件 //在左侧添加文字 <div class="input-group"> <span class="input-group-addon&q ...
- linux下时间的修改
1.关于时间的修改,在linux还是很重要的,在这里只是介绍一个简单的常用的命令,并且时间不会写入到系统. 2.命令 3.如果想把时间写进系统 修改完成之后,输入clock -w 时间将会被写进CMO ...
- MongoDB的find用法
0.查询符合条件数据的总条数 如:db.list名.find({条件}).count(); 1.返回指定的键值:db.list.find({条件},{name:"任意值",age: ...
- Largest Number || LeetCode
#include <stdio.h> #include <stdlib.h> #include <string.h> #define MAX 1000 int cm ...
- pod》error:The dependency `` is not used in any concrete target
内容提要: podfile升级之后到最新版本,pod里的内容必须明确指出所用第三方库的target,否则会出现The dependency `` is not used in any concrete ...
- Ubuntu deb包使用
deb是debian linus的安装格式,跟red hat的rpm非常相似,最基本的安装命令是:dpkg -i file.deb dpkg 是Debian Package的简写,是为Debian 专 ...