EDP转换IC NCS8801S：RGB/LVDS转EDP芯片

RGB/LVDS-to-eDP Converter
1 Features
    Embedded-DisplayPort (eDP) Output
    2-lane/4-lane eDP @ 1.62/2.7Gbps per lane
    FHD to WQXGA (2560*1600) supported
    Up to 6dB pre-emphasis
RGB Input
    18/24bit RGB Interface
    Pixel clock up to 270MHz
    SDR/DDR supported
    Pin order reversal supported
LVDS Input
    Dual-channel 6/8bit LVDS (Sync) interface
    400Mbps to 1Gbps per data pair
    Built-in termination
    Channel and polarity swap supported
Reference Clock
    Any freq. between 19MHz and 100MHz
    Crystal or single-ended clock input
    Built-in 5000ppm SSC generator
Misc
    I2C/SPI for chip configuration
    Built-in eDP handshake protocol
    I2C-AUX channel for TCON/DPCD/EDID control
    Built-in video test pattern
Power
    1.2V core supply
    2.5V or 3.3V IO supply
    RGB IO can go down to 1.8V
    Power consumption ~ 150mW
    @ 2048*1536*24bit*60Hz, LVDS mode
    Deep-sleep mode power <1mW
Package
    QFN-56 (7mm x 7mm) package
    RoHS Compliant
2 Block Diagram

3 General Description
    NCS8801S is a low-power RGB/LVDS-to-DisplayPort/eDP converter, which is designed for mobile devices including smartphones, tablets, laptops, etc. to support high-definition DP/eDP displays.
    NCS8801S supports 4-lane DP/eDP output which is typically required to support QXGA (2048*1536) and above at 60Hz frame rate.
    All the functions including both RGB and LVDS interfaces pack into a small 7mm*7mm QFN56 package which saves the precious space in mobile devices.

4 Pin Diagram
NCS8801S is fully compliant with NCS8801.

...