原文:https://blog.csdn.net/aaron_80726/article/details/79027760

注意:要进入到~目录 也就是家目录下才能查看防火墙

进入家目录:cd ~

关闭虚拟机防火墙:

关闭命令:  service iptables stop

永久关闭防火墙:chkconfig iptables off

两个命令同时运行,运行完成后查看防火墙关闭状态
service iptables status

1 关闭防火墙-----service iptables stop 
2 启动防火墙-----service iptables start 
3 重启防火墙-----service iptables restart 
4 查看防火墙状态--service iptables status 
5 永久关闭防火墙--chkconfig iptables off 
6 永久关闭后启用--chkconfig iptables on

CentOS6系统防火墙开启、关闭、查看状态(转载)的更多相关文章

  1. CentOs7 使用iptables防火墙开启关闭端口

    CentOs7 使用iptables防火墙开启关闭端口   # 0x01介绍 iptables命令是Linux上常用的防火墙软件,是netfilter项目的一部分iptables文件设置路径:命令:v ...

  2. Linux学习笔记之CentOS6.9 防火墙的关闭以及开启

    有的时候,我们需要对系统的防火墙进行操作,今天小编就给大家讲解一下如何开启以及关闭CentOS6.9系统下的防火墙. 输入:cat /etc/issue   查看版本 (一)通过service命令 s ...

  3. Linux防火墙开启关闭查询

    1.centos7防火墙 命令含义: –zone #作用域 –add-port=80/tcp #添加端口,格式为:端口/通讯协议 –permanent #永久生效,没有此参数重启后失效 服务与端口的启 ...

  4. centos7下 开启/关闭/查看firewall运行状态命令

    1.开启防火墙:systemctl start firewalld.service [root@localhost bin]# systemctl start firewalld.service [r ...

  5. linux防火墙开启-关闭

    1.永久性生效,重启后不会复原 开启: chkconfig iptables on 关闭: chkconfig iptables off 2. 即时生效,重启后复原 开启: service iptab ...

  6. linux查看防火墙状态及开启关闭命令(转)

    存在以下两种方式: 一.service方式 查看防火墙状态: [root@centos6 ~]# service iptables status iptables:未运行防火墙. 开启防火墙: [ro ...

  7. linux下查看防火墙当前状态,开启关闭等

    从配置菜单关闭防火墙是不起作用的,索性在安装的时候就不要装防火墙 查看防火墙状态: /etc/init.d/iptables status 暂时关闭防火墙: /etc/init.d/iptables  ...

  8. linux查看防火墙的状态以及开启关闭

    存在以下两种方式: 一.service方式 查看防火墙状态: [root@centos6 ~]# service iptables status 开启防火墙: [root@centos6 ~]# se ...

  9. linux查看防火墙状态及开启关闭命令

    存在以下两种方式: 一.service方式 查看防火墙状态: [root@centos6 ~]# service iptables status iptables:未运行防火墙. 开启防火墙: [ro ...

随机推荐

  1. MySQL--派生表临时结果集中的AutoKey

    在某些场景中,需要对派生表生成临时结果集进行materialized,如果该临时结果集中包含索引键,那么查询有可能通过该索引键来进行优化. 如对下面查询: SELECT T2.purpose_code ...

  2. Monitor Minio server with Prometheus

    转自:https://blog.minio.io/monitor-minio-server-with-prometheus-4ed537abcb74 Prometheus is an open sou ...

  3. C#更新程序设计

    更新程序设计 大致设想了两种更新方式,如下所示: 一种简单暴力,直接请求静态资源服务器上的文件 第二种考虑了网络传输不稳定时,中断的情况.再次启动更新时会检测本地文件下载多少了,然后接着上次中断的位置 ...

  4. Exception analysis

    Finding: Thread 119:1f7c Exception Code 0xE06D7363 From https://support.microsoft.com/en-us/help/185 ...

  5. 新版vue-cli输入本地ip不能访问,只能用localhost才可以访问?

    问:新版vue-cli输入本地ip不能访问,只能用localhost才可以访问? 答:修改config/index.js配置,将host: 'localhost',改为host: '0.0.0.0', ...

  6. 1、Nginx集群tomcat

    一.准备工作 下载nginx,http://nginx.org/,本文采用nginx-1.8.0,下载之后直接解压,免安装 下载tomcat,以配置3台tomcat服务器做负载均衡为例 二.修改tom ...

  7. CF 666E Forensic Examination——广义后缀自动机+线段树合并

    题目:http://codeforces.com/contest/666/problem/E 对模式串建广义后缀自动机,询问的时候把询问子串对应到广义后缀自动机的节点上,就处理了“区间”询问. 还要处 ...

  8. Hadoop HDFS NameNode工作机制

    Secondary namenode 首先,我们假设如果存储在Namenode节点的磁盘中,因为经常需要进行随机访问,还有响应客户请求,必然是效率过低.因此,元数据需要存放在内存中.但如果只存在内存中 ...

  9. windows环境下把Python代码打包成独立执行的exe

    windows环境下把Python代码打包成独立执行的exe可执行文件   有时候因为出差,突然急需处理一批数据.虽然写好的脚本存储在云端随用随取,然而编译的环境还需要重新搭建,模块也需要重新装载,从 ...

  10. jQuery自定义扩展写法

    jQuery自定义扩展有两种写法: $.extend({}) ;           调用方法:      $.方法          $.fn.extend({});        调用方法:    ...