CH573 CH582 CH579蓝牙从机(peripheral)例程讲解三(蓝牙服务修改)

修改服务需要对蓝牙比较熟悉的工程师去完成，否则在例程功能满足自己需求时，不建议修改，很容易改错，下面就简单介绍下如何在别的char添加一个nofify属性。

step1：

给Simple Profile Characteristic 1 Properties添加一个notify属性，原先只有读写属性：

// Simple Profile Characteristic 1 Properties
static uint8_t simpleProfileChar1Props = GATT_PROP_READ | GATT_PROP_WRITE | GATT_PROP_NOTIF;

step2:

模仿char4在char1的value 1下添加：

// Characteristic 1 configuration
{
{ATT_BT_UUID_SIZE, clientCharCfgUUID},
GATT_PERMIT_READ | GATT_PERMIT_WRITE,
0,
(uint8_t *)simpleProfileChar1Config},

step3:

全局搜索下simpleProfileChar4Config，共有五处，上面已经改了两处，

bStatus_t SimpleProfile_AddService(uint32_t services)
{
uint8_t status = SUCCESS;

// Initialize Client Characteristic Configuration attributes
GATTServApp_InitCharCfg(INVALID_CONNHANDLE, simpleProfileChar4Config);
GATTServApp_InitCharCfg(INVALID_CONNHANDLE, simpleProfileChar1Config);
// Register with Link DB to receive link status change callback
linkDB_Register(simpleProfile_HandleConnStatusCB);

if(services & SIMPLEPROFILE_SERVICE)
{
// Register GATT attribute list and CBs with GATT Server App
status = GATTServApp_RegisterService(simpleProfileAttrTbl,
GATT_NUM_ATTRS(simpleProfileAttrTbl),
GATT_MAX_ENCRYPT_KEY_SIZE,
&simpleProfileCBs);
}

step4:

static void simpleProfile_HandleConnStatusCB(uint16_t connHandle, uint8_t changeType)
{
// Make sure this is not loopback connection
if(connHandle != LOOPBACK_CONNHANDLE)
{
// Reset Client Char Config if connection has dropped
if((changeType == LINKDB_STATUS_UPDATE_REMOVED) ||
((changeType == LINKDB_STATUS_UPDATE_STATEFLAGS) &&
(!linkDB_Up(connHandle))))
{
GATTServApp_InitCharCfg(connHandle, simpleProfileChar4Config);
GATTServApp_InitCharCfg(connHandle, simpleProfileChar1Config);
}
}
}

step5:

新建一个通知函数：

step6:

前五步设置好，notify的通道就已经打通了，接下来调用发送就可以验证了：

ps：后面会加一些app端的显示