CentOS7 关闭防火墙[转]
CentOS6关闭防火墙使用以下命令,
/临时关闭
service iptables stop
//禁止开机启动
chkconfig iptables off
CentOS7中若使用同样的命令会报错,
stop iptables.service
Failed to stop iptables.service: Unit iptables.service not loaded.
这是因为CentOS7版本后防火墙默认使用firewalld,因此在CentOS7中关闭防火墙使用以下命令,
//临时关闭
systemctl stop firewalld
//禁止开机启动
systemctl disable firewalld
Removed symlink /etc/systemd/system/multi-user.target.wants/firewalld.service.
Removed symlink /etc/systemd/system/dbus-org.fedoraproject.FirewallD1.service.
当然,如果安装了iptables-service,也可以使用下面的命令,
yum install -y iptables-services
//关闭防火墙
service iptables stop
Redirecting to /bin/systemctl stop iptables.service
//检查防火墙状态
service iptables status
Redirecting to /bin/systemctl status iptables.service
鈼iptables.service - IPv4 firewall with iptables
Loaded: loaded (/usr/lib/systemd/system/iptables.service; disabled; vendor preset: disabled)
Active: inactive (dead)
CentOS7 关闭防火墙[转]的更多相关文章
- centos7 关闭防火墙
centos7 关闭防火墙 1.firewall相关的操作 查看防火墙状态 firewall-cmd --state 关闭防火墙 systemctl stop firewalld.s ...
- CentOS7 关闭防火墙和selinux
本文将简单介绍在CentOS7上如何临时和永久关闭防火墙和selinux. 关闭防火墙 # 查看防火墙状态 [root@localhost ~]# systemctl status firewalld ...
- centOS7关闭防火墙的命令
centOS7下关闭防火墙的命令已经改了,如下: systemctl stop firewalld
- centos 6和centos7关闭防火墙的方法
centos 6 关闭命令: service iptables stop 永久关闭防火墙:chkconfig iptables off 两个命令同时运行,运行完成后查看防火墙关闭状态 ...
- Centos7 关闭防火墙
CentOS 7.0默认使用的是firewall作为防火墙,使用iptables必须重新设置一下 1.直接关闭防火墙 systemctl stop firewalld.service #停止firew ...
- Centos7 关闭防火墙(转)
转载地址:http://www.cnblogs.com/silent2012/archive/2015/07/28/4682770.html CentOS 7.0默认使用的是firewall作为防火墙 ...
- Centos7 关闭防火墙(Firewalld ),使用防火墙(iptables)
1.直接关闭防火墙 systemctl stop firewalld.service: #停止firewall systemctl disable firewalld.service: #禁止fire ...
- CentOS7关闭防火墙方法
在之前的版本中关闭防火墙等服务的命令是 service iptables stop /etc/init.d/iptables stop 在RHEL7中,其实没有这个服务 [root@rhel7 ~]# ...
- Centos7关闭防火墙与selinux
CentOS 7.0默认使用的是firewall作为防火墙 直接关闭防火墙 systemctl stop firewalld.service #停止firewall systemctl disable ...
随机推荐
- 「小程序JAVA实战」小程序和后台api通信(28)
转自:https://idig8.com/2018/08/19/xiaochengxujavashizhanxiaochengxuhehoutaiapitongxin28/ 开发最重要的就是实操! 小 ...
- JSP显示错误信息中四个范围来保存变量
JSP中提供了四个范围来保存变量,分别是page,request,session,以及application 其中page范围只在当前页面有效,离开当前页面就失效了,这个肯定不行 request范围在 ...
- mysql数据库怎么安装到自己的电脑上?
安装mysql1.安装过程中输⼊入Y确认继续安装 2.设置密码1.第⼀一次设登陆密码 2.第⼆二次验证密码 安装完成
- CString 成员函数用法大全
CString的构造函数CString( );例:CString csStr; CString( const CString& stringSrc );例:CString csStr(&quo ...
- Android判断Service是否运行
/** * 用来判断服务是否运行. * @param context * @param className 判断的服务名字 * @ret ...
- Spark 性能相关参数配置详解-Storage篇
随着Spark的逐渐成熟完善, 越来越多的可配置参数被添加到Spark中来, 本文试图通过阐述这其中部分参数的工作原理和配置思路, 和大家一起探讨一下如何根据实际场合对Spark进行配置优化. 由于篇 ...
- php设置错误,错误记录
//设置错误级别. error_reporting(E_ALL); //显示所有错误 error_reporting(E_ALL&~E_NOTICE); //显示所有错误但不显示提示级别的 ...
- linux常用的一些命令行操作(ubuntu)
软件安装 sudo apt-get install xxx 压缩和解压缩 1. *.tar 用 tar –xvf 解压 2. *.gz 用 gzip -d或者gunzip 解压 3. *.tar.gz ...
- 【小前端】float属性
要求 需要float的元素,必须指定一个width宽度 没了 然后就可以指定 float:right 什么的了
- ReactNative常用第三方控件
Flex可视化在线工具 http://the-echoplex.net/flexyboxes/?fixed-height=on&legacy=on&display=flex&f ...