单机版:

配置spring配置文件applicationContext.xml

<?xml version="1.0" encoding="UTF-8"?>
<beans xmlns="http://www.springframework.org/schema/beans"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:mvc="http://www.springframework.org/schema/mvc"
xmlns:context="http://www.springframework.org/schema/context"
xmlns:aop="http://www.springframework.org/schema/aop" xmlns:tx="http://www.springframework.org/schema/tx"
xsi:schemaLocation="http://www.springframework.org/schema/beans
http://www.springframework.org/schema/beans/spring-beans-3.2.xsd
http://www.springframework.org/schema/mvc
http://www.springframework.org/schema/mvc/spring-mvc-3.2.xsd
http://www.springframework.org/schema/context
http://www.springframework.org/schema/context/spring-context-3.2.xsd
http://www.springframework.org/schema/aop
http://www.springframework.org/schema/aop/spring-aop-3.2.xsd
http://www.springframework.org/schema/tx
http://www.springframework.org/schema/tx/spring-tx-3.2.xsd "> <!-- 连接池配置 -->
<bean id="jedisPoolConfig" class="redis.clients.jedis.JedisPoolConfig">
<!-- 最大连接数 -->
<property name="maxTotal" value="30" />
<!-- 最大空闲连接数 -->
<property name="maxIdle" value="10" />
<!-- 每次释放连接的最大数目 -->
<property name="numTestsPerEvictionRun" value="1024" />
<!-- 释放连接的扫描间隔(毫秒) -->
<property name="timeBetweenEvictionRunsMillis" value="30000" />
<!-- 连接最小空闲时间 -->
<property name="minEvictableIdleTimeMillis" value="1800000" />
<!-- 连接空闲多久后释放, 当空闲时间>该值 且 空闲连接>最大空闲连接数 时直接释放 -->
<property name="softMinEvictableIdleTimeMillis" value="10000" />
<!-- 获取连接时的最大等待毫秒数,小于零:阻塞不确定的时间,默认-1 -->
<property name="maxWaitMillis" value="1500" />
<!-- 在获取连接的时候检查有效性, 默认false -->
<property name="testOnBorrow" value="true" />
<!-- 在空闲时检查有效性, 默认false -->
<property name="testWhileIdle" value="true" />
<!-- 连接耗尽时是否阻塞, false报异常,ture阻塞直到超时, 默认true -->
<property name="blockWhenExhausted" value="false" />
</bean> <!-- redis单机 通过连接池 -->
<bean id="jedisPool" class="redis.clients.jedis.JedisPool" destroy-method="close">
<constructor-arg name="poolConfig" ref="jedisPoolConfig"/>
<constructor-arg name="host" value="192.168.25.145"/>
<constructor-arg name="port" value="6379"/>
</bean>

测试:

 private ApplicationContext applicationContext;

     @Before
public void init() {
applicationContext = new ClassPathXmlApplicationContext(
"classpath:applicationContext.xml");
} @Test
public void testJedisPool() {
JedisPool pool = (JedisPool) applicationContext.getBean("jedisPool");
try {
jedis = pool.getResource(); jedis.set("name", "lisi");
String name = jedis.get("name");
System.out.println(name);
}catch(Exception ex){
ex.printStackTrace();
}finally{
if(jedis != null){
//关闭连接
jedis.close();
}
}
}

集群版:

配置spring配置文件applicationContext.xml

 <!-- 连接池配置 -->
<bean id="jedisPoolConfig" class="redis.clients.jedis.JedisPoolConfig">
<!-- 最大连接数 -->
<property name="maxTotal" value="30" />
<!-- 最大空闲连接数 -->
<property name="maxIdle" value="10" />
<!-- 每次释放连接的最大数目 -->
<property name="numTestsPerEvictionRun" value="1024" />
<!-- 释放连接的扫描间隔(毫秒) -->
<property name="timeBetweenEvictionRunsMillis" value="30000" />
<!-- 连接最小空闲时间 -->
<property name="minEvictableIdleTimeMillis" value="1800000" />
<!-- 连接空闲多久后释放, 当空闲时间>该值 且 空闲连接>最大空闲连接数 时直接释放 -->
<property name="softMinEvictableIdleTimeMillis" value="10000" />
<!-- 获取连接时的最大等待毫秒数,小于零:阻塞不确定的时间,默认-1 -->
<property name="maxWaitMillis" value="1500" />
<!-- 在获取连接的时候检查有效性, 默认false -->
<property name="testOnBorrow" value="true" />
<!-- 在空闲时检查有效性, 默认false -->
<property name="testWhileIdle" value="true" />
<!-- 连接耗尽时是否阻塞, false报异常,ture阻塞直到超时, 默认true -->
<property name="blockWhenExhausted" value="false" />
</bean>
<!-- redis集群 -->
<bean id="jedisCluster" class="redis.clients.jedis.JedisCluster">
<constructor-arg index="0">
<set>
<bean class="redis.clients.jedis.HostAndPort">
<constructor-arg index="0" value="192.168.101.3"></constructor-arg>
<constructor-arg index="1" value="7001"></constructor-arg>
</bean>
<bean class="redis.clients.jedis.HostAndPort">
<constructor-arg index="0" value="192.168.101.3"></constructor-arg>
<constructor-arg index="1" value="7002"></constructor-arg>
</bean>
<bean class="redis.clients.jedis.HostAndPort">
<constructor-arg index="0" value="192.168.101.3"></constructor-arg>
<constructor-arg index="1" value="7003"></constructor-arg>
</bean>
<bean class="redis.clients.jedis.HostAndPort">
<constructor-arg index="0" value="192.168.101.3"></constructor-arg>
<constructor-arg index="1" value="7004"></constructor-arg>
</bean>
<bean class="redis.clients.jedis.HostAndPort">
<constructor-arg index="0" value="192.168.101.3"></constructor-arg>
<constructor-arg index="1" value="7005"></constructor-arg>
</bean>
<bean class="redis.clients.jedis.HostAndPort">
<constructor-arg index="0" value="192.168.101.3"></constructor-arg>
<constructor-arg index="1" value="7006"></constructor-arg>
</bean>
</set>
</constructor-arg>
<constructor-arg index="1" ref="jedisPoolConfig"></constructor-arg>
</bean>

测试代码:

 private ApplicationContext applicationContext;

     @Before
public void init() {
applicationContext = new ClassPathXmlApplicationContext(
"classpath:applicationContext.xml");
} //redis集群
@Test
public void testJedisCluster() {
JedisCluster jedisCluster = (JedisCluster) applicationContext
.getBean("jedisCluster"); jedisCluster.set("name", "zhangsan");
String value = jedisCluster.get("name");
System.out.println(value);
}

redis与spring整合·的更多相关文章

  1. Redis和Spring整合

    Redis和Spring整合 Redis在这篇里就不做介绍了~以后系统的学学,然后整理写出来. 首先是环境的搭建 通过自己引包的方式,将redis和spring-redis的包引到自己的项目中,我项目 ...

  2. redis与spring整合实例

    1)首先是redis的配置. 使用的是maven工程,引入redis与spring整合的相关jar包 <!-- redis服务 start--> <dependency> &l ...

  3. 分布式缓存技术redis学习系列(五)——redis实战(redis与spring整合,分布式锁实现)

    本文是redis学习系列的第五篇,点击下面链接可回看系列文章 <redis简介以及linux上的安装> <详细讲解redis数据结构(内存模型)以及常用命令> <redi ...

  4. 分布式缓存技术redis系列(五)——redis实战(redis与spring整合,分布式锁实现)

    本文是redis学习系列的第五篇,点击下面链接可回看系列文章 <redis简介以及linux上的安装> <详细讲解redis数据结构(内存模型)以及常用命令> <redi ...

  5. redis系列之5----redis实战(redis与spring整合,分布式锁实现)

    本文是redis学习系列的第五篇,点击下面链接可回看系列文章 <redis简介以及linux上的安装> <详细讲解redis数据结构(内存模型)以及常用命令> <redi ...

  6. Redis跟Spring整合,sentinel模式

    普通模式整合 一.在pom.xml中引入redis的依赖 <dependency> <groupId>org.springframework.data</groupId& ...

  7. redis 与 spring整合 hash 增删改操作 list增删改操作

    本人,对于以前redis的学习是非常痛苦的!近期将以前的东西捡起来.以博客的形式存储,以便于以后快速捡起来,并和广大同胞一起分享! 1):简单介绍 redis 是基于C语言开发. redis是一个ke ...

  8. Redis + Jedis + Spring整合遇到的异常(转)

    项目中需要用到缓存,经过比较后,选择了redis,客户端使用jedis连接,也使用到了spring提供的spring-data-redis.配置正确后启动tomcat,发现如下异常: Caused b ...

  9. redis和spring整合使用

    第一步,在项目中加入redis的pom代码: <dependency> <groupId>redis.clients</groupId> <artifactI ...

随机推荐

  1. CD(01背包)

    You have a long drive by car ahead. You have a tape recorder, but unfortunately your best music is o ...

  2. hust训练赛20160330--B - 又见LKity

    Problem 2122 又见LKity Time Limit: 1000 mSec Memory Limit : 32768 KB  Problem Description 嗨!大家好,在Templ ...

  3. github新建本地仓库,再同步远程仓库基本用法

    github新建本地仓库,再同步远程仓库基本用法 1 mkdir gitRepo 2 cd gitRepo 3 git init  #初始化本地仓库 4 git add xxx  #添加要push到远 ...

  4. ST 表学习

    作用:ST算法是用来求解给定区间RMQ的最值,本文以最小值为例 举例: 给出一数组A[0~5] = {5,4,6,10,1,12},则区间[2,5]之间的最值为1. 方法:ST算法分成两部分:离线预处 ...

  5. 【HDOJ6322】Euler Function(数论)

    题意: 思路: #include <stdio.h> #include <vector> #include <algorithm> #include <str ...

  6. 【cmd】cmd常用命令

    dir 是英文单词directory(目录)的缩写,主要用来显示一个目录下的文件和子目录 md  是英文make directory(创建目录)的缩写 cd  是英文change directory( ...

  7. bit manipulation

    WIKI Bit manipulation is the act of algorithmically manipulating bits or other pieces of data shorte ...

  8. SQL SERVER 2012 第五章 创建和修改数据表 の SQL SERVER中的对象名

    [ServerName.[DataBaseName.[SchemeName.]]]ObjectName 服务器名,数据库名,模式名,对象名 其中模式是一个新出的坑爹的东西.

  9. Milking Time---poj3616

    Description Bessie is such a hard-working cow. In fact, she is so focused on maximizing her producti ...

  10. Java调用WSDL接口

    1.首先准备jar包: 2.代码调用如下: String url="url地址"; QName qName=new QName("命名空间","接口名 ...