VHDL testbench 例子，包含向文件中写数据

 

LIBRARY ieee;
USE ieee.std_logic_1164.ALL;
use std.textio.all;
use ieee.std_logic_textio.all;
 
ENTITY DFFNTest IS
END DFFNTest;
 
ARCHITECTURE behavior OF DFFNTest IS
 
    -- Component Declaration for the Unit Under Test (UUT)
 
    COMPONENT DFFN
    GENERIC ( INIT : bit := '0');
     PORT(
         Q  : OUT  std_logic;
         CLK  : IN  std_logic;
         D : IN  std_logic
        );
    END COMPONENT;
   

   --Inputs
   signal CLK : std_logic := '0';
   signal D : std_logic := '0';

     --Outputs
   signal Q : std_logic;
   file fh_w:text;
  
   
BEGIN
 
   -- Instantiate the Unit Under Test (UUT)
    uut: DFFN PORT MAP (
          Q => Q,
          CLK => CLK,
          D => D
        );

    write_proc:process
        variable buf_w : line;
        begin
            wait for 91 ns;
            wrtData:LOOP
          wait for 10 ns;
          write(buf_w,CLK);
            write(buf_w,string'("  "));
            write(buf_w,D);
             write(buf_w,string'("  "));
             write(buf_w,Q);
             writeline(fh_w,buf_w);
        END LOOP wrtData;
    end process;

    -- Stimulus process
    stim_proc: process
    variable fstatus:FILE_OPEN_STATUS;
    variable buf_wh:line;
variable i :integer :=0;
    begin
    file_open(fstatus,fh_w,"DFFNtb_out.vrf",write_mode);
    write(buf_wh,string'("CLK D  Q"));
    writeline(fh_w,buf_wh);   
  
        wait for 100 ns;   
    loop1: while(i<50) loop
    wait for 10 ns;
        CLK <= not CLK;
        if((i rem 3) = 0) then    
         D <= not D;
      end if;
          i := i+1;
    end loop loop1;
    file_close(fh_w);
    wait;
   end process;

END;