#ifndef _I386_ERRNO_H
#define _I386_ERRNO_H
#define EPERM 1 /* Operation not permitted */
#define ENOENT 2 /* No such file or directory */
#define ESRCH 3 /* No such process */
#define EINTR 4 /* Interrupted system call */
#define EIO 5 /* I/O error */
#define ENXIO 6 /* No such device or address */
#define E2BIG 7 /* Arg list too long */
#define ENOEXEC 8 /* Exec format error */
#define EBADF 9 /* Bad file number */
#define ECHILD 10 /* No child processes */
#define EAGAIN 11 /* Try again */
#define ENOMEM 12 /* Out of memory */
#define EACCES 13 /* Permission denied */
#define EFAULT 14 /* Bad address */
#define ENOTBLK 15 /* Block device required */
#define EBUSY 16 /* Device or resource busy */
#define EEXIST 17 /* File exists */
#define EXDEV 18 /* Cross-device link */
#define ENODEV 19 /* No such device */
#define ENOTDIR 20 /* Not a directory */
#define EISDIR 21 /* Is a directory */
#define EINVAL 22 /* Invalid argument */
#define ENFILE 23 /* File table overflow */
#define EMFILE 24 /* Too many open files */
#define ENOTTY 25 /* Not a typewriter */
#define ETXTBSY 26 /* Text file busy */
#define EFBIG 27 /* File too large */
#define ENOSPC 28 /* No space left on device */
#define ESPIPE 29 /* Illegal seek */
#define EROFS 30 /* Read-only file system */
#define EMLINK 31 /* Too many links */
#define EPIPE 32 /* Broken pipe */
#define EDOM 33 /* Math argument out of domain of func */
#define ERANGE 34 /* Math result not representable */
#define EDEADLK 35 /* Resource deadlock would occur */
#define ENAMETOOLONG 36 /* File name too long */
#define ENOLCK 37 /* No record locks available */
#define ENOSYS 38 /* Function not implemented */
#define ENOTEMPTY 39 /* Directory not empty */
#define ELOOP 40 /* Too many symbolic links encountered */
#define EWOULDBLOCK EAGAIN /* Operation would block */
#define ENOMSG 42 /* No message of desired type */
#define EIDRM 43 /* Identifier removed */
#define ECHRNG 44 /* Channel number out of range */
#define EL2NSYNC 45 /* Level 2 not synchronized */
#define EL3HLT 46 /* Level 3 halted */
#define EL3RST 47 /* Level 3 reset */
#define ELNRNG 48 /* Link number out of range */
#define EUNATCH 49 /* Protocol driver not attached */
#define ENOCSI 50 /* No CSI structure available */
#define EL2HLT 51 /* Level 2 halted */
#define EBADE 52 /* Invalid exchange */
#define EBADR 53 /* Invalid request descriptor */
#define EXFULL 54 /* Exchange full */
#define ENOANO 55 /* No anode */
#define EBADRQC 56 /* Invalid request code */
#define EBADSLT 57 /* Invalid slot */
#define EDEADLOCK EDEADLK
#define EBFONT 59 /* Bad font file format */
#define ENOSTR 60 /* Device not a stream */
#define ENODATA 61 /* No data available */
#define ETIME 62 /* Timer expired */
#define ENOSR 63 /* Out of streams resources */
#define ENONET 64 /* Machine is not on the network */
#define ENOPKG 65 /* Package not installed */
#define EREMOTE 66 /* Object is remote */
#define ENOLINK 67 /* Link has been severed */
#define EADV 68 /* Advertise error */
#define ESRMNT 69 /* Srmount error */
#define ECOMM 70 /* Communication error on send */
#define EPROTO 71 /* Protocol error */
#define EMULTIHOP 72 /* Multihop attempted */
#define EDOTDOT 73 /* RFS specific error */
#define EBADMSG 74 /* Not a data message */
#define EOVERFLOW 75 /* Value too large for defined data type */
#define ENOTUNIQ 76 /* Name not unique on network */
#define EBADFD 77 /* File descriptor in bad state */
#define EREMCHG 78 /* Remote address changed */
#define ELIBACC 79 /* Can not access a needed shared library */
#define ELIBBAD 80 /* Accessing a corrupted shared library */
#define ELIBSCN 81 /* .lib section in a.out corrupted */
#define ELIBMAX 82 /* Attempting to link in too many shared libraries */
#define ELIBEXEC 83 /* Cannot exec a shared library directly */
#define EILSEQ 84 /* Illegal byte sequence */
#define ERESTART 85 /* Interrupted system call should be restarted */
#define ESTRPIPE 86 /* Streams pipe error */
#define EUSERS 87 /* Too many users */
#define ENOTSOCK 88 /* Socket operation on non-socket */
#define EDESTADDRREQ 89 /* Destination address required */
#define EMSGSIZE 90 /* Message too long */
#define EPROTOTYPE 91 /* Protocol wrong type for socket */
#define ENOPROTOOPT 92 /* Protocol not available */
#define EPROTONOSUPPORT 93 /* Protocol not supported */
#define ESOCKTNOSUPPORT 94 /* Socket type not supported */
#define EOPNOTSUPP 95 /* Operation not supported on transport endpoint */
#define EPFNOSUPPORT 96 /* Protocol family not supported */
#define EAFNOSUPPORT 97 /* Address family not supported by protocol */
#define EADDRINUSE 98 /* Address already in use */
#define EADDRNOTAVAIL 99 /* Cannot assign requested address */
#define ENETDOWN 100 /* Network is down */
#define ENETUNREACH 101 /* Network is unreachable */
#define ENETRESET 102 /* Network dropped connection because of reset */
#define ECONNABORTED 103 /* Software caused connection abort */
#define ECONNRESET 104 /* Connection reset by peer */
#define ENOBUFS 105 /* No buffer space available */
#define EISCONN 106 /* Transport endpoint is already connected */
#define ENOTCONN 107 /* Transport endpoint is not connected */
#define ESHUTDOWN 108 /* Cannot send after transport endpoint shutdown */
#define ETOOMANYREFS 109 /* Too many references: cannot splice */
#define ETIMEDOUT 110 /* Connection timed out */
#define ECONNREFUSED 111 /* Connection refused */
#define EHOSTDOWN 112 /* Host is down */
#define EHOSTUNREACH 113 /* No route to host */
#define EALREADY 114 /* Operation already in progress */
#define EINPROGRESS 115 /* Operation now in progress */
#define ESTALE 116 /* Stale NFS file handle */
#define EUCLEAN 117 /* Structure needs cleaning */
#define ENOTNAM 118 /* Not a XENIX named type file */
#define ENAVAIL 119 /* No XENIX semaphores available */
#define EISNAM 120 /* Is a named type file */
#define EREMOTEIO 121 /* Remote I/O error */
#define EDQUOT 122 /* Quota exceeded */
#define ENOMEDIUM 123 /* No medium found */
#define EMEDIUMTYPE 124 /* Wrong medium type */
#endif

用strerror函数可返回对应的字符串

errno.h的数字对应的字符串错误的更多相关文章

  1. linux下错误的捕获:errno(errno.h)和strerror(string.h)的使用

    参考:http://blog.csdn.net/starstar1992/article/details/52756387 linux下错误的捕获:errno和strerror的使用 经常在调用lin ...

  2. C 标准库系列之errno.h

    errno.h 提供了一个整数全局变量errno,当系统调用或者库函数的错误事件发生时可能会修改该值,指明错误的原因,该值可在任何需要的地方被修改:一般情况不为0的值表示出现了异常或者错误. errn ...

  3. errno.h

    linux 中c语言使用errno.h头文件来记录错误信息以及定义返回错误代码的宏. strerror(errno)打印错误信息 1. warning: implicit declaration of ...

  4. 标准库errno.h 查看错误代码编号,errno:4 与error:2

    log 里报错,errno:4   与errno:2 查了一下 errno.h   --------下文来自百度百科 errno 编辑 errno 是记录系统的最后一次错误代码.代码是一个int型的值 ...

  5. js随机生成字母数字组合的字符串 随机动画数字

    效果描述: 附件中只有一个index.html文件有效 其中包含css以及html两部分内容 纯js生成的几个随机数字 每次都不重复,点击按钮后再次切换 使用方法: 1.将css样式引入到你的网页中 ...

  6. c/c++ 数字转成字符串, 字符串转成数字

    c/c++ 数字转成字符串, 字符串转成数字 ------转帖 数字转字符串: 用C++的streanstream: #include <sstream> #Include <str ...

  7. Linux系统中errno对应的中文意思 errno.h

    /usr/include/asm/errno.h #define EPERM 1 /* Operation not permitted */操作不允许 #define ENOENT 2 /* No s ...

  8. linux 下errno各个值的意义(转) errno.h

    strerror(errno):获取errno对应的错误 查看错误代码errno是调试程序的一个重要方法.当linux C api函数发生异常时,一般会将errno变量(需include errno. ...

  9. C 标准库 - <errno.h>

    C 标准库 - <errno.h> 简介 C 标准库的 errno.h 头文件定义了整数变量 errno,它是通过系统调用设置的,在错误事件中的某些库函数表明了什么发生了错误.该宏扩展为类 ...

随机推荐

  1. python pytz 结合时区的日期操作

    有一个安排在2012 年12 月21 日早上9:30 的电话会议,地点在芝加哥.而朋友在印度的班加罗尔,那么他应该在当地时间几点参加这个会议呢? 对几乎所有涉及到时区的问题,你都应该使用pytz 模块 ...

  2. PHP多进程学习(二)__fork起多个子进程,父进程的阻塞与非阻塞

    先简单来了解一下多进程 [来初步了解一下PHP多进程及简单demo] php的多进程是不是可以无限制的fork子进程?fork调用的一个奇妙之处就是它仅仅被调用一次,却能够返回两次,它可能有三种不同的 ...

  3. Linux及安全实践二

    Linux及安全实践二   基本内核模块 20135238 龚睿 1.  理解模块原理 linux模块是一些可以作为独立程序来编译的函数和数据类型的集合.之所以提供模块机制,是因为Linux本身是一个 ...

  4. Linux内核分析第五周 扒开系统调用的三层皮(下) (20135304 刘世鹏)

    作者:刘世鹏20135304  <Linux内核分析>MOOC课程http://mooc.study.163.com/course/USTC-1000029000 一.给MenuOS增加t ...

  5. UVa 11383 少林决胜(二分图最佳完美匹配)

    https://vjudge.net/problem/UVA-11383 题意: 给定一个N×N矩阵,每个格子里都有一个正整数W(i,j).你的任务是给每行确定一个整数row(i),每列也确定一个整数 ...

  6. BZOJ 3930 【CQOI2015】 选数

    题目链接:选数 这种SB题我都Wa飞了,彻底没救系列- 首先,我们可以发现1,如果我们选了两个不同的数,那么它们的\(\gcd\)不会超过\(r-l+1\).于是,我们可以设一个\(f_i\)表示任取 ...

  7. photoswipe图片滑动插件使用

    第一步:  引入jss和css文件 <!-- Core CSS file --> <link rel="stylesheet" href="path/t ...

  8. redis优缺点

    redis主要是一个内存数据库.很多时候是被作为缓存来使用.redis的优势主要体现在和其他缓存方案进行比较,redis的不足主要是和其他数据库进行比较时体现的. 优点: 读写性能优异 支持数据持久化 ...

  9. 获取iframe(angular 动态页面)高度

    问题比较特殊,google了好久才得到启示 开发的angular页面,需要嵌入到客户的web页中,以iframe方式.由于iframe的高度需要指定,而angular动态生成机制导致页面高度会随时变化 ...

  10. Mybatis出现参数错误Parameter 'cateCode_search' not found. Available parameters are [3, 2, 1, 0, param1, param2, 5, param3, 4, param4, param5, param6]

    1.参数改为序号 2.在mybatis借口上加@Param注解