http://en.wikipedia.org/wiki/Linaro Linaro From Wikipedia, the free encyclopedia     This article appears to be written like an advertisement. Please help improve it by rewriting promotional content from a neutral point of view and removing any inapp…

具体的输入信息是这样的. uboot> http Link down: eth0 Ethernet mode (duplex/speed): / Mbps HTTP server is starting at IP: 192.168.0.250 HTTP server is ready! Request for: / Request for: /style.css Data will be downloaded at 0x80800000 in RAM Upgrade type: firmwar…

1.busybox busybox最轻量 1) 修改Makefile CROSS_COMPILE ?= /usr/local/gcc-linaro-arm-linux-gnueabihf/bin/arm-linux-gnueabihf- ARCH ?= arm 2) 配置make menuconfig Busybox Settings  ---> [*] Build BusyBox as a static binary (no shared libs) (/usr/local/gcc-linar…

淘宝看到一款FIR300M路由器,当时只要19.9元.图便宜就买了. Hardware Architecture: MIPS Vendor: MediaTek (Ralink) Bootloader: U-Boot 1.1.3 System-On-Chip: Ralink MT7620N ver:2 eco:3 CPU MIPS 24KEc V5.0 CPU Speed 580 MHz Flash: 4 MB MXIC 25L320 RAM: 32 MB EM63A165TS SDRAM Wir…

1      Scope of Document This document describes how to make am335x arago rootfs using ycoto project 2      Requiremen 2.1     Function Requirement Make am335x arago rootfs 2.2     Performance Requirement NA 3      Functional Description 3.1     Ycot…

参考 https://openwrt.org/start?id=docs/guide-developer/packages ,英文稍好点的自己看吧,我写出来也就是方便,英文不好的人看. 软件包的来源,有几种来源.git , sourceforge.net , 或是某软件自己的网站下载. 也支持 svn 什么的,不常用的就不介绍了 1, git 下载 PKG_NAME:=dkjson PKG_VERSION:=2.5 PKG_RELEASE:= PKG_SOURCE_URL:=https://gi…

需要先在 make menuconfig 中打开 sdk make -j4在 bin\targets\ramips\mt7620生成一个openwrt-sdk-ramips-mt7620_gcc-7.3.0_musl.Linux-x86_64.tar.xztar xf openwrt-sdk-ramips-mt7620_gcc-7.3.0_musl.Linux-x86_64.tar.xz 以后使用 sdk 编译自己的软件包. openwrt sdk 的用处. 一般在嵌入式开发软件要做的事情是这样…

在从官网安装的WNDR3800 15.05.1版本OpenWrt中, 不带usb存储支持以及samba, 需要另外安装 1. 启用usb支持 USB Basic Support https://wiki.openwrt.org/doc/howto/usb.essentials # 每次重启后, 软件包都要重新update opkg update 安装 kmod-usb-uhci 或者 kmod-usb-ohci, 如果前者不能安装, 系统会有提示 opkg install kmod-usb-uh…

1. libcurl 的参考文档如下 CURLOPT_HEADERFUNCTION Pass a pointer to a function that matches the following prototype: size_t function( void *ptr, size_t size, size_t nmemb, void *userdata);. This function gets called by libcurl as soon as it has received head…

1.  利用 CURLOPT_WRITEFUNCTION 设置回调函数, 利用 CURLOPT_WRITEDATA 获取数据指针 官网文档如下 CALLBACK OPTIONS CURLOPT_WRITEFUNCTION Pass a pointer to a function that matches the following prototype: size_t function( char *ptr, size_t size, size_t nmemb, void *userdata); …