参考:http://programmingadvent.blogspot.hk/2012/12/raspberry-pi-uart-with-pyserial.html Raspberry Pi UART with PySerial   OS: Occidentalis v0.2Hardware: Raspberry Pi Revision B with CobblerSetup: Serial loopback (connect RX and TX pins on GPIO pins) Lin…

Raspberry pi 使用python+pySerial实现串口通信 转:http://blog.csdn.net/homeway999/article/details/8642353   目录(?)[+] Raspberry pi 使用pythonpySerial实现串口通信 Raspberry pi端安装pyserial 方法1source安装 方法2pip安装 Raspberry pi端连接串口 Windows端连接串口   Raspberry pi 使用python+pySerial…

参考: http://www.siongboon.com/projects/2013-07-08_raspberry_pi/index.html Raspberry Pi         Get started with Raspberry Pi (RPi), a step by step approach to get your Raspberry Pi with low level electronics hardware control. Make simple, step by step…

参考:RPi Serial Connection 本文来自:http://www.raspberry-projects.com/pi/programming-in-c/uart-serial-port/using-the-uart Using the UART If you are running Raspbian or similar then the UART will be used as a serial console.  Using a suitable cable, such as…

2013-05-21 买的树莓派终于到手了,嘿嘿.我在官方代理ICKEY买的,是英国版,B型. 上手教程可以根据Getting Started with Raspberry Pi(网上有电子版免费下载),中文版可以参考 树莓派Raspberry Pi上手报告 和 Raspberry Pi(树莓派)试用小记 ,具体过程不再赘述. 我在安装过程中遇到的最大问题是无线网卡的配置.无线网卡要选择Raspberry Pi兼容的,兼容的硬件和相关硬件需要注意的问题参见 RPi VerifiedPeriphe…

After damaging the GPIO port on our raspberry pi while designing a new solar monitoring system we decided that it might be a good idea to build a buffer/level translator to protect the GPIO pins from over voltage and ESD spikes.  The board would need…

最近公司有项目想要在树莓派上做,代替原来的工控机(我们是把工控主机当作小的主机用,一台小的工控主机最少也要600左右,而树莓派只要200多).于是,公司买了一个Raspberry Pi B+和一个Raspberry Pi 2 B,并要求能在B+上做就尽量用B+,原因很简单,B+比Raspberry Pi 2要便宜70左右.拿到闻名已久的树莓派之后很是兴奋,试着从官网下载了官方推荐的镜像raspbian,用Win32DiskImager烧录到SD卡上,然后上电,起初屏幕上什么都没显示,不管重新烧写…

最新的下载地址是: https://www.offensive-security.com/kali-linux-arm-images/ 按照官网的说法是找不到树莓派版本的SHA1SUM和SHA1SUMS.gpg文件的,所以官网上以下的验证没法继续做:…

there are some things to do for raspberry pi 3b for the first time: 1, connect pi with monitor/KB/mouse, then power on it and go into its desktop(by default):expand system up to the whole storage of SD card(it seems to be maximum of 64G by official e…

首先请大家原谅我的"不务正业",放着RabbitHub不写,各种系列的文章不写搞什么Iot,哈哈,最近心血来潮想搞个速度极快的遥控车玩,望着在角落的Raspberry Pi恶狠狠的开着各种折腾它 材料选购 这里得感谢万能的TB,能买到很多现实生活中可能根本问不到的东西.下面列一下本次TB购物清单. 小车底盘一套(轮子.马达.舵机.底盘.各种螺丝等) L298N模块一个 杜邦线(公对母.公对公.母对母)若干 6节5号电池盒一个 下面是一些工具,托人带的 烙铁.焊锡 导线 万用表 螺丝刀一…