VMWare: eth0: error fetching interface information : device not found  今天在VMware上新搭建的Redhat Linux 64bit 系统,执行命令:ifconfig eth0,报如下错误: 执行命令:cat /proc/net/dev,发先并没有eth0,而是新生产的eth1,如下图所示: 解决方案: 1.执行命令:cp /etc/sysconfig/network-scripts/ifcfg-eth0 /etc/sys…

转载,原文出处:http://zh888.blog.51cto.com/1684752/775447 亲测有效,感谢作者!!! ----------------------------分割线---------------------------------------------------- eth0不见了的处理方法   1.刚开始运行ifconfig eth0发现网卡不见了.[root@localhost ~]# ifconfig eth0eth0: error fetching inter…

CentOS6.5 重启网络报错: Bringing up interface eth0: Error: Connection activation failed: Device not managed by NetworkManager or unavailable 解决方法: [root@localhost network-scripts]# vi ifcfg-eth0 [root@localhost network-scripts]# service network restart Shu…

Just follow the below steps and everything will be ok...   1. Remove Network Manager from startup Services.#chkconfig NetworkManager off 2. Add Default Net Manager#chkconfig network on 3.Stop NetworkManager first#service NetworkManager stop 4.and the…

在VMware的虚拟机中克隆CentOS,在重启网卡的时候报错: Bringing up interface eth0:  Error: No suitable device found: no device found for connection 'System eth0'. Shutting down loopback interface: [ OK ] Bringing up loopback interface: [ OK ] Bringing up interface eth0: E…

在VMware的虚拟机中克隆CentOS,在重启网卡的时候报错:   Shutting down loopback interface: [ OK ] Bringing up loopback interface: [ OK ] Bringing up interface eth0: Error: No suitable device found: no device found for connection 'System eth0'. [FAILED] 解决办法: 首先,打开/etc/ude…

error: more than one device and emulator 如果出现上面那种情况 请关闭  ide 输入下面的  再次重新启动 模拟器 如果实际上只有一个设备或模拟器,并且查到有offline的状态:那就说明是ADB本身的BUG所导致的,就需要用如下的方法处理下了:C:\Users\gaojs>adb kill-serverC:\Users\gaojs>taskkill /f /im adb.exe第一条命令是杀ADB的服务,第二条命令是杀ADB的进程!如果第一条没有用,…

error: insufficient permissions for device: verify udev rules.See [http://developer.android.com/tools/device.html] for more information. 确认文件中/etc/udev/rules.d/51-android.rules 中是否添加了设备的idVendor和idProduct…

上位机:ubuntu14.04 64bit 下位机:qq2440 交叉编译器:arm-linux-gcc 3.4.1 下位机使用的linux内核版本:kernel2.6.13 1.插入u盘时错误信息如下: [root@FriendlyARM /home]# usb 1-1: new full speed USB device using s3c2410-ohci and address 6usb 1-1: device descriptor read/64, error -110usb 1-1:…

CSC : fatal error CS0042: Unexpected error creating debug information file 'xxxx.PDB' -- 'c:\Builds\xxxx.pdb: The process cannot access the file because it is being used by another process. 查看了详细的Build Log, 发现了同样的一文件被build了两次. 原因是 Solution 中的 Project…