Unique Paths 解答】的更多相关文章

Question A robot is located at the top-left corner of a m x n grid (marked 'Start' in the diagram below). The robot can only move either down or right at any point in time. The robot is trying to reach the bottom-right corner of the grid (marked 'Fin…
Question Follow up for "Unique Paths": Now consider if some obstacles are added to the grids. How many unique paths would there be? An obstacle and empty space is marked as 1 and 0 respectively in the grid. For example, There is one obstacle in…
之所以将这三道题放在一起,是因为这三道题非常类似. 1. Minimum Path Sum 题目链接 题目要求: Given a m x n grid filled with non-negative numbers, find a path from top left to bottom right which minimizes the sum of all numbers along its path. Note: You can only move either down or righ…
题目来自于:https://leetcode.com/problems/unique-paths/ :https://leetcode.com/problems/unique-paths-ii/ A robot is located at the top-left corner of a m x n grid (marked 'Start' in the diagram below). The robot can only move either down or right at any poi…
一.题目说明 题目62. Unique Paths,在一个m*n矩阵中,求从左上角Start到右下角Finish所有路径.其中每次只能向下.向右移动.难度是Medium! 二.我的解答 这个题目读读题目,理解后不难.定义一个dp[m][n],初始化最后一列为1,最后一行为1,然后循环计算到dp[0][0]就可以了. 代码如下: class Solution{ public: int uniquePaths(int m,int n){ vector<vector<int>> dp(m…
Follow up for "Unique Paths": Now consider if some obstacles are added to the grids. How many unique paths would there be? An obstacle and empty space is marked as 1 and 0 respectively in the grid. For example, There is one obstacle in the middl…
A robot is located at the top-left corner of a m x n grid (marked 'Start' in the diagram below). The robot can only move either down or right at any point in time. The robot is trying to reach the bottom-right corner of the grid (marked 'Finish' in t…
Follow up for "Unique Paths": Now consider if some obstacles are added to the grids. How many unique paths would there be? An obstacle and empty space is marked as 1 and 0 respectively in the grid. For example, There is one obstacle in the middl…
这题在Unique Paths的基础上增加了一些obstacle的位置,应该说增加的难度不大,但是写的时候对细节的要求多了很多,比如,第一列的初始化会受到之前行的第一列的结果的制约.另外对第一行的初始化,也要分if else赋值.很容易出现初始化不正确的情况. 代码: class Solution { public: int uniquePathsWithObstacles(vector<vector<int> > &obstacleGrid) { ][]==) ; int…
唯一路径问题II Unique Paths II Follow up for "Unique Paths": Now consider if some obstacles are added to the grids. How many unique paths would there be? An obstacle and empty space is marked as 1 and 0 respectively in the grid. For example, There is…