NetScaler SNIPs Bound To An Interface Without A VLAN https://www.citrix.com/blogs/2014/04/09/work-your-magic-with-the-netscaler-toolkit-used-by-the-pros/ That’s right! Did you know that the NetScaler has another method to bind a SNIP IP address to an…

按照官方文档配置linux bridge 会出现一下问题 Tunneling cannot be enabled without the local_ip bound to an interface on the host. Please configure local_ip 192.168.30.71 on the host interface to be used for tunneling and restart the agen 在此部分配置,本地的ip,不能配置管理网络的ip…

SOLUTION VERIFIED February 5 2014 KB340153 Environment Red Hat Enterprise Linux 6 (All Versions) Red Hat Enterprise Linux 5 (All Versions) Issue Need to configure VLAN on bonded interface and a bridge on top of this VLAN tagged bonded interface. Reso…

NetScaler VLAN’s Demystified https://www.citrix.com/blogs/2014/12/29/netscaler-vlans-demystified/ The Citrix NetScaler appliance is an amazingly flexible application delivery controller (ADC). It’s capable of performing both simple and very complex t…

SNMP OID Reference - NetScaler 10 https://docs.citrix.com/content/dam/docs/en-us/netscaler/10/downloads/ctx132381.htm System Limits for a NetScaler Appliance 参考 https://support.citrix.com/content/dam/supportWS/kA460000000CcAzCAK/CTX118716.pdf This re…

Communication Device Class,简称CDCUSB Compound Device,USB复合设备USB Composite Device,USB组合设备 摘要USB复合设备 Compound Device内嵌Hub和多个Function,每个Function都相当于一个独立的USB外设,有自己的PID/VID.USB组合设备Composite Device内只有一个Function,只有一套PID/VID,通过将不同的interface定义为不同的类来实现多个功能的组合.…

Huge Packet Drops (Tx drops) Observed on NetScaler 来源  https://support.citrix.com/article/CTX215843 Article | NetworkingPerformance | Created: 15 Dec 2014 | Modified: 11 Aug 2016 Applicable Products NetScaler Symptoms or Error Huge packet drops was o…

SOLUTION VERIFIED October 13 2015 KB39674 KB741413 environment Red Hat Enterprise Linux 4 Red Hat Enterprise Linux 5 Red Hat Enterprise Linux 6 Red Hat Enterprise Linux 7 question Suppose I want a VLAN ID of 192 for the eth0 on a RHEL 5 or 6 system.…

mesos集群部署参见上篇. 运行在mesos上面和 spark standalone模式的区别是: 1)stand alone 需要自己启动spark master 需要自己启动spark slaver(即工作的worker) 2)运行在mesos 启动mesos master 启动mesos slaver 启动spark的 ./sbin/start-mesos-dispatcher.sh -m mesos://127.0.0.1:5050 配置spark的可执行程序的路径(也就是mesos里…

实现DHCP自动获取IP地址 前提:系统已经实现DNS(即使用ping www.baidu.com测试时能ping通). 1．  在内核中添加以下选项: Networking  ---> [*] Networking support Networking options  ---> <* > Packet socket                 //添加.配置CONFIG_PACKET [ * ]     IP: DHCP support         //添加 [ * ]…