具体错误信息如下图: error: RPC failed; curl 18 transfer closed with outstanding read data remaining    fatal: The remote end hung up unexpectedly    fatal: early EOF    fatal: index-pack failed 这个错误产生的原因是时间太久,资源太大. 基于此,第一种考量即扩大缓存区.即在命令行输入:         git config …

报错信息: error: RPC failed; curl transfer closed with outstanding read data remaining fatal: The remote end hung up unexpectedly fatal: early EOF fatal: index-pack failed at org.jenkinsci.plugins.gitclient.CliGitAPIImpl.launchCommandIn(CliGitAPIImpl.jav…

报错信息: error: RPC failed; curl 18 transfer closed with outstanding read data remainingfatal: the remote end hung up unexpectedlyfatal: early EOFfatal: index-pack failed 解决方法一:网上大部分解决措施:命令终端输入如下命令,但是一般并不好使, git config --global http.postBuffer 524288000…

error: RPC failed; curl 18 transfer closed with outstanding read data remaining because have error when clone by HTTP protocol (curl command). And, you should increment buffer size: git config --global http.postBuffer 524288000 原因:由于Http协议错误,当Pull或者C…

error: RPC failed; curl 18 transfer closed with outstanding read data remaining fatal: The remote end hung up unexpectedly fatal: early EOF fatal: index-pack failed 原因:我们的项目由于时代久远,所以导致整个项目比较复杂庞大.出现这种错误,就是因为curl的postBuffer默认值太小的原因,重新在终端配置一下这个值就可以了.解决方…

报错: error: RPC failed; curl 18 transfer closed with outstanding read data remaining fatal: The remote end hung up unexpectedly fatal: 过早的文件结束符(EOF) fatal: index-pack 失败 处理: 究其原因是因为curl的postBuffer的默认值太小,我们需要调整它的大小,在终端重新配置大小 在这里,笔者把postBuffer的值配置成500M,…

1. pod update 的时候出现下边的错误 error: RPC failed; curl 18 transfer closed with outstanding read data remaining fatal: The remote end hung up unexpectedly fatal: early EOF fatal: index-pack failed [!] CocoaPods was not able to update the `master` repo. If t…

最近在做全栈项目,前台后台,服务器端,三端在一个文件夹,当git clone 项目的时候就会出现:error: RPC failed; curl 18 transfer closed with outstanding read data remaining 因此无法克隆下来: 究其原因是因为curl的postBuffer的默认值太小,我们需要调整它的大小,需要终端重新配置大小,在这里,笔者把postBuffer的值配置成500M,对笔者来说已经够了.可以根据你需要下载的文件大小,将postBuf…

error: RPC failed; curl transfer closed with outstanding read data remaining fatal: The remote end hung up unexpectedly fatal: early EOF fatal: index-pack failed 出现以上错误有以下原因 1.缓存区溢出curl的postBuffer的默认值太小,需要增加缓存 使用git命令增大缓存(单位是b,524288000B也就500M左右) git…

答: 将clone地址中的https://替换成git://即可解决 如: 将https://git.openwrt.org/project/luci.git修改为git://git.openwrt.org/project/luci.git…

解决方案也是网上搜的,总结一下 一,加大缓存区git config --global http.postBuffer 524288000这个大约是500M二.少clone一些,–depth 1git clone https://github.com/flutter/flutter.git --depth 1–depth 1的含义是复制深度为1,就是每个文件只取最近一次提交,不是整个历史版本.三.换协议clone http方式换成SSH的方式,即 https:// 改为 git://例如git c…

遇到的问题一: error: RPC failed; curl 18 transfer closed with outstanding read data remaining         fatal: The remote end hung up unexpectedly         fatal: early EOF         fatal: index-pack failed 这个错误是因为项目太久,tag资源文件太大 解决方式一, 网上大部分解决措施:命令终端输入: git co…

git clone时报RPC failed; curl 18 transfer closed with outstanding read data remaining 错误 原因1:缓存区溢出 解决方法:命令行输入 git config http.postBuffer 524288000 执行上面命令如果依旧clone失败,考虑可能原因2:网络下载速度缓慢 解决方法:命令行输入 git config --global http.lowSpeedLimit 0 git config --globa…

错误描述 今天在github上使用 git clone 某个项目代码的时, git clone https://github.com/XXXX/xxx-blog.git 下载速度很慢,然后下载一段时间后,总是提示下面的错误信息: remote: Enumerating objects: 33, done. remote: Counting objects: 100% (33/33), done. remote: Compressing objects: 100% (8/8), done. err…

众所周知 pod lib create ObjcName 需要从git 上边克隆模版 :https://github.com/CocoaPods/pod-template.git 然后有时候会很慢报错: [!] /usr/bin/git clone https://github.com/CocoaPods/pod-template.git zplib Cloning into 'zplib'... error: RPC failed; curl LibreSSL SSL_read: SSL_ER…

报错 $ git push; Enumerating objects: 1002, done. Counting objects: 100% (1002/1002), done. Delta compression using up to 8 threads Compressing objects: 100% (974/974), done. Writing objects: 100% (1002/1002), 41.40 MiB | 6.22 MiB/s, done. Total 1002 (…

错误提示: error: RPC failed; curl 18 transfer closed with outstanding read data remaining fatal: The remote end hung up unexpectedly fatal: early EOF fatal: index-pack failed 导致原因: curl的postBuffer默认值太小,需要在终端重新配置这个值 解决方案: 1.将curl的postBuffer值配置为500M,具体值看项目…

Git fetch和git pull的区别, 解决Git报错:error: You have not concluded your merge (MERGE_HEAD exists). Git fetch和git pull的区别: 都可以从远程获取最新版本到本地 1.Git fetch:只是从远程获取最新版本到本地,不会merge(合并) $:git fetch origin master //从远程的origin的master主分支上获取最新版本到origin/master分支上 $:git…

Git fetch和git pull的区别, 解决Git报错:error: You have not concluded your merge (MERGE_HEAD exists). 2017年02月22日 20:38:28 阅读数:19178 Git fetch和git pull的区别: 都可以从远程获取最新版本到本地 1.Git fetch:只是从远程获取最新版本到本地,不会merge(合并) $:git fetch origin master //从远程的origin的master主分支…

Git fetch和git pull的区别, 解决Git报错:error: You have not concluded your merge (MERGE_HEAD exists). 解决办法一:保留本地的更改,中止合并->重新合并->重新拉取 $:git merge --abort $:git reset --merge $:git pull 解决办法二:舍弃本地代码,远端版本覆盖本地版本(慎重) $:git fetch --all $:git reset --hard origin/ma…

php transfer closed with outstanding read data remaining php curl CURLOPT_HTTPHEADER php curl 报错 transfer closed with outstanding read data remaining http://php.net/manual/zh/function.curl-setopt.php…

1. 最近用git pull几个大项目,总是报如下错误: error: RPC failed; curl 56 GnuTLS recv error (-9): A TLS packet with unexpected length was received. fatal: The remote end hung up unexpectedly fatal: early EOF fatal: index-pack failed 2. 按照网上方法,还是存在问题. // 配置代理 git confi…

Git fetch和git pull的区别: 都可以从远程获取最新版本到本地 1.Git fetch:只是从远程获取最新版本到本地,不会merge(合并) $:git fetch origin master //从远程的origin的master主分支上获取最新版本到origin/master分支上 $:git log -p master..origin/master //比较本地的master分支和origin/master分支的区别 $:git merge origin/master //合…

在执行命令 git commit --all -m  '说明' 时报错“The file will have its original line endings in your working directory” 通过查询后发现出现这个问题主要原因是: 我们从别人github地址上通过git clone下载下来,而又想git push到我们自己的github上,那么就会出现上面提示的错误信息 此时只需要执行如下代码: git rm -r --cached . git config core.a…

环境 Windows 7 . git push 时出现错误,无法提交代码到远程仓库. Counting objects: , done. Delta compression using up to threads. Compressing objects: % (/), done. Writing objects: % (/), 1.87 KiB | 1.87 MiB/s, done. Total (delta ), reused (delta ) error: RPC failed; curl…

// git 报错情况: error: RPC failed; curl 56 GnuTLS recv error (-110): The TLS connection was non-properly terminated. 解决方案: Note: This solution is not just limited to codecommit but also for other Ubuntu gnults_handshake related issues. If you have AWS c…

git clone: error: RPC failed; result=18, HTTP code = 200 解决办法 分类: git2013-09-01 17:03 10753人阅读 评论(2) 收藏 举报 gitcurl ​今天git clone时,出现这个错误. 因为自己的git库上面放了一些数据,所以整个库较大.google了一下,发现是curl的postBuffer 默认值较小的原因,配置下个这个值,就不会出现该错误了.…

在安装cocoapods遇到的问题 [!] /usr/bin/git clone https://github.com/CocoaPods/Specs.git master Cloning into 'master'... error: RPC failed; curl 56 SSLRead() return error -36 fatal: The remote end hung up unexpectedly fatal: early EOF fatal: index-pack failed…

. . . . . 今天从 github 上 clone 代码的时候,出现了一个错误,重试多次后仍然出现,错误如下: >$ git clone https://github.com/BOINC/boinc boinc Cloning into 'boinc'... remote: Enumerating objects: , done. remote: Counting objects: % (/), done. remote: Compressing objects: % (/), done.…

今天在为新的业务线搭架数据库后,在启动的时候报错 root@qsbilldatahis-db01:/usr/local/mysql/bin# ./mysql ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2) 在此记录一下,希望能够给遇到此问题的兄弟们提供一个解决问题的思路,有了思路后一步一步排查问题就比较容易了,但是我这个问题比较奇怪,如…