step 1: Draw a PCB shape and the main component placed in the PCB. The drawing sheet should be in the top view. If the drawing sheet is a 3D file, you should transfer it to 2D file as following. You can generate more than one 2D files from different…

in the mode of "渲染模式" in the mode of "着色模式" Principle 1 : In the mode of "着色模式", the color in the Rhinoceros is the same as one in the Altium Designer Principle 2 : create color materials, if "材料赋予方式" is "图层&qu…

1 Shift+S          这个快捷键能高亮当前层,并且使其他层变成灰色,见下图:       2 隐藏指定层 在图中右下角的地方,右键,会弹出一个选项条,选择Hide Layers,可以选择想要隐藏的层.     3 View Configurations 中隐藏指定层 在PCB图中任意一个位置右键,选择Options->BoardLayers & Colors       在Board Layers And Colors中可以选择哪些层显示,哪些层隐藏        4 只显示…

1 Shift+S          这个快捷键能高亮当前层,而且使其它层变成灰色.见下图: 2 隐藏指定层 在图中右下角的地方,右键.会弹出一个选项条.选择Hide Layers.能够选择想要隐藏的层. 3 View Configurations 中隐藏指定层 在PCB图中随意一个位置右键,选择Options->BoardLayers & Colors 在Board Layers And Colors中能够选择哪些层显示.哪些层隐藏 4 仅仅显示单层 这个的效果是很的明显的.设置和效果见下…

版权声明:本文为博主原创文章,遵循CC 4.0 BY-SA 版权协议,转载请附上原文出处链接及本声明. 作者:struct_mooc 博客地址:https://www.cnblogs.com/structmooc/p/12078896.html 今天画完PCB,想像原理图一样导出PDF,直接操作,然后一顿操作猛如虎,效果就像二百五!看图(下面是去掉覆铜之后的,也还...可以吧): 看着...还行吧,但并不利于实用效果,然后我就捣鼓了一顿,得到如下效果图,继续看图: 只导出PCB元器件及标号,至少…

press 3 key to swith to 3D view, and press shift key and dont' loose your grip, hold the right mouse button to adjust angle .…

Now I want to introduce the use of 'Configure Physical Nets', as follows: If you has finished the PCB layout, as follows: Then you want to get rid of these white wires, so the two boards would be separated completely. And you change the nets of the o…

Line frame is created by Rhino(DXF file format)…

如何隐藏: 如何显示: 按下N后…

…