Two stage U-Boot design】的更多相关文章

android在启动时uboot推断有没有组合健按下或者cache分区的升级文件来决定进入哪个系统(可能还有别的推断方式) 有组合健按下或者cache分区有升级文件,则载入recovery.img进入升级系统.否则载入boot.img进入正常系统 此次记录3个要点: 1:boot.img的结构 2:怎样作成boot.img 3:uboot 怎样寻找boot.img 一:boot.img的结构例如以下: +-----------------+ |boot header | 1 page +----…
html,body { } .CodeMirror { height: auto } .CodeMirror-scroll { } .CodeMirror-lines { padding: 4px 0px } .CodeMirror pre { } .CodeMirror-scrollbar-filler,.CodeMirror-gutter-filler { background-color: white } .CodeMirror-gutters { border-right-width:…
http://www.onjava.com/pub/a/onjava/2001/05/30/optimization.htmlComparing the performance of LinkedLists and ArrayLists (and Vectors) (Page last updated May 2001, Added 2001-06-18, Author Jack Shirazi, Publisher OnJava). Tips: ArrayList is faster than…
https://gitorious.org/freebsd/freebsd/raw/56c5165837bf08f50ca4a08c6b2da91f73852960:sys/arm/include/acle-compat.h /* * Copyright (c) 2014 ARM Ltd * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modificat…
转载请注明来源:cuixiaolei的技术博客 这篇文章主要通过分析高通recovery目录下的recovery.cpp源码,对recovery启动流程有一个宏观的了解.MTK和高通的recovery几乎一样,只是使用自己家的mt_xxx文件. 为什么要分析recovery.cpp这个文件? 我们知道,当我们通过按键或者应用进入recovery模式,实质是kernel后加载recovery.img,kernel起来后执行的第一个进程就 是init,此进程会读入init.rc启动相应的服务.在re…
l 要求: 裁剪一个装载有网卡驱动可以上网并且使用到init的一个小系统 l 准备: 虚拟机,centos6.4 l 步骤: 一.在宿主机上添加一块硬盘,并为其安装grub 1. 在宿主机上添加一块硬盘,这里添加的是sde这块硬盘. 2. 使用fdisk为sde分两个区,sde1 (100M)  sde2(2G) 3. 创建目录/mnt/boot    /mnt/sysroot 1 mkdir -pv /mnt/{boot,sysroot} 4. 将/dev/sde1挂载到/mnt/boot ,…
Linux系统的初始化流程: POST:ROM+RAM BIOS: Boot Sequence MBR: 446:bootloader 64: 分区表 2: 5A kernel文件:基本磁盘分区 /sbin/init /lib/modules/ initrd:  rd: ram disk /sbin/init: /etc/inittab /etc/rc.d/rc.sysinit脚本 init: CentOS 5: SysV格式的系统初始化程序 串行化:100 A --> B --> C A()…
Linux组成 由 kernel 和 rootfs 组成 单内核:(进程管理,内存管理,网络管理, 驱动程序,文件系统, 安全功能) /boot/vmlinuz-VERSION-release 辅助的伪根系统 /boot/initramfs-VERSION-release.img            这是一个cpio格式的归档文件,存放的是各种驱动模块 md5sum vmlinuz /boot/vmlinuz       查看两个文件中的内容是否完全一致,只要有一个字符不一样,两个文件的md5…
Introduction GNU GRUB is a Multiboot boot loader. It was derived from GRUB, the GRand Unified Bootloader, which was originally designed and implemented by Erich Stefan Boleyn. Briefly, a boot loader is the first software program that runs when a comp…
http://en.wikipedia.org/wiki/ARM_architecture ARM architecture     ARM architectures The ARM logo Designer ARM Holdings Bits 32-bit or 64-bit Introduced 1985 Design RISC Type Register-Register Branching Condition code Open Proprietary 64/32-bit archi…