002 static and default route】的更多相关文章

r2(config)#ip route 192.168.1.0 255.255.255.0 192.168.2.1 r1(config)#ip route 192.168.3.0 255.255.255.0 192.168.2.2     r1(config)#ip route 0.0.0.0 0.0.0.0 192.168.2.1 来自为知笔记(Wiz)…
A default route of a computer that is participating in computer networking is the packet forwarding rule (route) taking effect when no other route can be determined for a given Internet Protocol (IP) destination address. All packets for destinations…
Task: View / Display FreeBSD Routing Table Use netstat command with -r option:$ netstat -r$ netstat -rnOutput: Routing tables Internet: Destination Gateway Flags Refs Use Netif Expire default 61.221.xx.yy UGS 0 247 em1 10 10.10.110.5 UGS 0 50 em0 10.…
I was learning through interfaces when I noticed that you can now define static and default methods in an interface. public interface interfacesample2 { public static void method() { System.out.println("hello world"); } public default void menth…
At the moment the problem is that, if you try to navigate to a route that is not configured, you will see only the layout page without any partial template injected into it. For example if you navigate to http://localhost:51983/ABC, since ABC is not…
1,能够用route命令暂时改动: route add default gw <gateway ip> 2, 通过改动/etc/sysconfig/network 文件永久改动: 脚本: #!/bin/sh #configure default gw #   $1 is ip of gateway defgw=$1 sed -i "s/NETWORKING.*/NETWORKING=yes/" /etc/sysconfig/network sed -i "s/HO…
route delete 0.0.0.0route add 0.0.0.0 mask 0.0.0.0 10.226.4.14…
转自:  http://codingstandards.iteye.com/blog/1125312 用途说明 route命令用于显示和操作IP路由表(show / manipulate the IP routing table).要实现两个不同的子网之间的通信,需要一台连接两个网络的路由器,或者同时位于两个网络的网关来实现.在Linux系统中,设置路由通常是 为了解决以下问题:该Linux系统在一个局域网中,局域网中有一个网关,能够让机器访问Internet,那么就需要将这台机器的IP地址设置…
先给出本文中测试用的 controller: public class PersonsController : Controller { public ActionResult Query(string name) { return View(); } } ASP.NET 中 Url 大小写 不严格来讲,ASP.NET MVC 对 Url 是不敏感的,以下 Url 都是相同的,都可以访问到 PersonController 的 Query 方法: ~/Persons/Query ~/PERSON…
查看 Linux 内核路由表 使用下面的 route 命令可以查看 Linux 内核路由表. # route Destination  Gateway      Genmask          Flags Metric Ref Use Iface 192.168.0.0   *                 255.255.255.0  U        0         0     0    eth0 169.254.0.0   *                 255.255.0.0…