CISCO MDS – Useful ‘Show’ Commands CONFIG:show startup-configshow running-configshow running-config diffshow run |include host|gateway|ntp|fcdomain|http|telnet|zoneset|vsanshow start |include host|gateway|ntp|fcdomain|http|telnet|zoneset|vsanshow ins…

hadoop资料 云端云计算2G基础课程 (Hadoop简介.安装与范例) 炼数成金3G视频分享下载 虚拟机三种网络模式该如何上网指导此为视频 Hadoop传智播客七天hadoop(3800元)视频,持续更新 Hadoop传智播客最新的hadoop学习资料第一季(1)需要简单了解Linux操作系统(本课程使用CentOS6.4操作系统):(2)需要java基础,因为hadoop是java语言写的,课程中会对hadoop源码进行简析.第一天资料:传智播客hadoop教程01-课程介绍以及hadoo…

H3C实验手册H3C实验手册内容包括:1.帧中继典型配置举例一2.典型访问列表和地址转换综合应用配置案例3.交换机基本配置4.轮循DCC配置举例5.X.25典型配置举例6.MultiLink PPP配置7.ISDN拨号上网举例8.Quidway S3026简单组网案例9.PPP10.共享DCC配置举例11.RIP12.端口trunk之交换机间vlan透传13.帧中继典型配置举例二 http://www.aboutyun.com/thread-6046-1-1.html14.VMware vFab…

debug iapp through debug ip ftp debug iapp : to begin debugging of IAPP operations(in privileged EXEC mode) no debug iapp debug idmgr : to enable debugging for the identity manager (IDMGR)(in privileged EXEC mode) no debug idmgr debug of-mgr efp-ext…

In this article I want to share to you on how to create and configure vlan on Linux through Cisco Catalyst Switch. Requirements: 1. Linux installed on a PC with one or more NICs (Network Interface Card). I use Centos 5.4 using 2.6.18-164.11.1.el5PAE…

copy system:running-config nvram:startup-config : to save your configuration changes to the startup configuration so that the changes will not be lost if the software reloads or a power outage occurs command | {begin | include | exclude} regular-expr…

debug eap through debug he-module subslot periodic debug eap : to display information about Extensible Authentication Protocol(EAP)(in privileged EXEC mode) no debug eap debug ecfmpal : to enable debugging of the data path of the Ethernet Connectivit…

debug aaa accounting through debug auto-config debug aaa accounting : to display information on accountable events as they occur(in privileged EXEC mode) no debug aaa accounting : to disable debugging output debug aaa authentication : to display info…

cisco路由基于策略的路由选择 基于策略的路由选择是一种手段,通过它管理员可以在基于目的地的路由选择协议中实现偏离标准路由的路由选择.基于目的地的路由选择协议将根据到一个目的地的最短路径选择路由,基于目的地的路由选择允许管理员决定想要将通信量路由到那里. 基于源的策略 基于源策略的路由选择允许用户根据信息量的始发地做出路由选择决定.参见下图. 我们需要在R1上创建一个策略,在R1的ATM0/0接口允许从网络192.168.200.0/24发送通信量到网络192.168.50.0/24和192.…

Operating Cisco Router consider the hardware on the ends of the serial link, in particular where the channel service unit/data service unit (CSU/DSU) hardware resides on each end of the serial link. It sits either outside the router as a separate dev…