iSCSI Network Designs: Part 5 – iSCSI Multipathing, Host Bus Adapters, High Availability and Redundancy 16th May 2008 by Greg Ferro I feel that is important to understand how the adapters will integrate with the switching infrastructure so that I can…
see aslo:http://www.yellow-bricks.com/vmware-high-availability-deepdiv/ HA Deepdive My posts on VMware High Availability (HA) have always been my best read articles. I aggregated all articles in to a page which is easier to maintain when functionalit…
Intel® 82599 10 GbE Controller Datasheet 15.0 Glossary and Acronyms 术语表 缩写 英文解释 中文解释 1 KB A value of 1 KB equals 1024 bytes. 1's complement A system k…
BACKGROUND The present subject matter relates, in general, to a computing system having multi-host processors and, in particular, to a serial ATA (SATA) controller for the multi-host processors. Processing speeds of central processing units (CPUs) of…
http://en.wikipedia.org/wiki/SGPIO SGPIO From Wikipedia, the free encyclopedia Serial General Purpose Input/Output (SGPIO) is a 4-signal (or 4-wire) bus used between a host bus adapter (HBA) and a backplane. Of the 4 signals, 3 are driven by the HB…
A method of offloading, from a host data processing unit (205), iSCSI TCP/IP processing of data streams coming through at least one TCP/IP connection (3071 ,307 2 ,307 3), and a related iSCSI TCP/IP Offload Engine (TOE). The method including: providi…
http://blogs.vmware.com/vsphere/2011/11/how-to-configure-esxi-to-boot-via-software-iscsi.html Introduction VMware introduced support for iSCSI back in the ESX 3.x days. However, ESX could only boot from an iSCSI LUN if a hardware iSCSI adapter was us…
