在VMware的虚拟机中克隆CentOS,在重启网卡的时候报错: Bringing up interface eth0:  Error: No suitable device found: no device found for connection 'System eth0'. Shutting down loopback interface: [ OK ] Bringing up loopback interface: [ OK ] Bringing up interface eth0: E…
在VMware的虚拟机中克隆CentOS,在重启网卡的时候报错:   Shutting down loopback interface: [ OK ] Bringing up loopback interface: [ OK ] Bringing up interface eth0: Error: No suitable device found: no device found for connection 'System eth0'. [FAILED] 解决办法: 首先,打开/etc/ude…
故障说明: 在克隆几台虚拟机,发现启动后不能配置IP地址等信息,使用linux命令: “ifup eth0”也不能激活网卡, 而在使用"service network restart",出现错误: Error:No suitable device found: no device found for connection "System eth0" 解决方法: 基于这个错误,在网上查找了一下,发现有很多朋友都遇到过,这次错误使用第2种方式解决. 1.删除/etc/u…
在重启linux网络服务的时候提示: Active connection path: /org/freedesktop/NetworkManager/ActiveConnection/2 并且产生报错: Bringing up interface eth1: Error: Connection activation failed: The connection is not for this device. 经过在网上一番查找,是由于开启了NetworkManager服务,这个服务是RedHat…
vmware复制虚拟机出现Error:No suitable device found:no device found for connection 'System eth0' 废话不多说,直接给出解决办法: 1.查看硬件地址 [root@master ~]# ifconfig eth2      Link encap:Ethernet  HWaddr 00:0C:29:89:18:58            inet addr:192.168.11.200  Bcast:192.168.11.…
当我们克隆centos虚拟机无法正常获取IP地址,重启网卡也提示Bringing up interface eth0:  Device eth0 does not seem to be present,delaying initialization.                    [FAILED]: 该如何解决呢 重启网卡提示Bringing up interface eth0:  Device eth0 does not seem to be present,delaying init…
问题描述:在VMware里克隆出来的CentOS Linux,开机执行命令:ifconfig...没有看到eth0网卡.然后重启网卡又报以下错误:Bringing up interface eth0:  Device eth0 does not seem to be present,delaying initialization.                    [FAILED] 解决办法:首先,打开/etc/udev/rules.d/70-persistent-net.rules内容如下…
以root用户登录 #vi  /etc/sysconfig/network-scripts/ifcfg-eth0     #编辑配置文件,添加修改以下内容 BOOTPROTO=static   #启用静态IP地址 ONBOOT=yes  #开启自动启用网络连接 IPADDR=192.168.21.129  #设置IP地址 NETMASK=255.255.255.0  #设置子网掩码 GATEWAY=192.168.21.2   #设置网关 DNS1=8.8.8.8 #设置主DNS DNS2=8.…
http://my.oschina.net/coolfire368/blog/292742 1./etc/udev/rules.d/70-persistent-net.rules 修改也成,修改时留下最后一个网卡地址,那是系统找到的,用它!!把其他改成它的数字,把ifcfg-eth0或1 名字改下 全清空,重启也成 2.ifcfg-eth0 3.网卡地址 与虚拟机配置---这个我没改 4.网络连接不用改了,图形界面不需要改. 5.service network restart…
当你在VMware Workstation Pro中,打开从别人那里克隆来的系统,或者是开启迁移后的虚拟机系统时,VMware将会提示你:此虚拟机可能已被移动或 复制.为了配置特定的管理和网络功能.VMware Workstation需要知道是否已移动或复制了此虚拟机.如果… ..          如果机器没有任何的提示就直接开机了,或者是你选择了“  我已复制该虚拟机(P) ”,那么说明System eth0在正常开机后可能是不能使用的.造成这个问题的关键之处在于,经过复制克隆.机器迁移后,…