1,安装Python3.6的依赖包 # yum -y install zlib-devel bzip2-devel openssl-devel ncurses-devel sqlite-devel readline-devel tk-devel gdbm-devel db4-devel libpcap-devel xz-devel 2.下载Python3 # wget https://www.python.org/ftp/python/3.6.1/Python-3.6.1.tgz 3.安装pyt

centos7源码安装Python3的前提条件: # yum -y install openssl-devel bzip2-devel expat-devel gdbm-devel readline-devel sqlite-devel make gcc-c++ zlib #   yum install libffi-devel -y #cd $path/python3.6/ #./configure && make && make install

CentOS 7 下源码安装 python3   在CentOS7下,默认安装的是python2.7:为满足项目要求,安装python3 的方法如下:   1. 首先安装python3.6可能使用的依赖 # yum -y install openssl-devel bzip2-devel expat-devel gdbm-devel readline-devel zlib-devel    2. 编译安装Python3.6 # wget https://www.python.org/ftp/py

源码安装Python3 一.安装Python3需要的依赖包 [root@localhost ~]# yum install -y gcc make wget openssl openssl-devel readline readline-devel zlib* libffi-devel 注释:readline 是 bash shell 用的库,包含许多使用功能 后面预编译可能会出现zipimport.ZipImportError: can't decompress data; zlib not

前提: 1.实现自动补全需要安装模块 readline-devel (yum install -y readline-devel) 2.实现支持SSL协议需安装模块 openssl-devel (yum install -y openssl-devel)  否则使用pip时会有报错,如下 安装步骤 1.下载python3.5源码包到/usr/local/src/ (https://www.python.org/ftp/python/3.5.2/Python-3.5.2.tgz) 2. tar x

CentOS7默认安装了python2.7.5,当需要使用python3的时候,可以手动下载Python源码后编译安装. 下载python(https://www.python.org/ftp/python/3.4.3/Python-3.4.3.tar.xz) 解压下载好的压缩包 sudo mkdir /usr/local/python3 进入解压目录sudo ./configure --prefix=/usr/local/python3 sudo make sudo make install

下载源码包https://www.python.org/downloads/ 解压(以3.64版本为例)wget https://www.python.org/ftp/python/3.6.4/Python-3.6.4.tgztar -zxvf Python-3.6.4.tgzcd Python-3.6.4 安装./configure --prefix=/usr/local/python3make && make install 添加软链接ln -s /usr/local/python3/

基于Ubuntu 18.04  自带了3.6,可惜 3.7秒出. 一个原则是: 自带的3.6不要动 防止用apt install python3-XXX时版本不对. 理由: 自带的2.7和3.6都是让操作系统自己用的; python是linux系发行版的一部分, 在linux发行版中的地位不低于windows里Windows/文件夹下的系统工具.正因为这样,才不要随便折腾每个发行版自带的py版本. 相反,python不是windows的一部分,正因为不是,所以在windows下才可以随便安装卸载

1.非常重要!必须得先安装py3所依赖的软件包,否则可能会出现py3安装成功,却缺少相应的pip yum groupinstall "Development tools" yum install zlib-devel bzip2-devel openssl-devel ncurses-devel sqlite-devel readline-devel tk-devel 2 .wegt下载py3源码 或者自己去官网下载源码包 wget https://www.python.org/ftp

Python3.7 源码下载: https://www.python.org/downloads/release/python-370/ 解压源码: tar -zxvf Python-3.7.0.tgz -C ~ 安装源码编译所需的各种依赖库:(Ubuntu16.04环境下) sudo apt-get install zlib1g-dev libbz2-dev libssl-dev libncurses5-dev  libsqlite3-dev libreadline-dev tk-dev li

1.环境 安装CentOS 7.2最小系统(CentOS-7-x86_64-Minimal-1511.iso) 2.需求 Python-3.6.4.tar.xz(官网下载) GCC(yum安装) 一堆开发库(yum安装) 3.编译 3.1安装编译器 yum -y install gcc 3.2安装依赖 yum -y install bzip2-devel sqlite-devel openssl-devel readline-devel xz-devel xz-devel tk-devel gd

一.先安装python3所依赖的软件包,非常重要(否则可能会出现python3安装成功,却缺少相应的pip) yum groupinstall "Development tools" -y yum -y install zlib-devel bzip2-devel openssl-devel ncurses-devel sqlite-devel readline-devel tk-devel 二.wget下载python3源码包(或者自己去官网下载源码包) wget https://w

具体编译过成与正常的Python源代码在x86平台上的过程无异,此篇随笔仅当用作复制黏贴的备忘录.不得不说在一个老旧系统上安装一个老旧的Python版本,从头编译一个Python还是一个较为稳健的选择. 获取源代码 Python官网处下载所需源码版本[https://www.python.org/downloads/source/] curl -O https://www.python.org/ftp/python/3.7.13/Python-3.7.13.tgz 准备工作(安装依赖) 其实依赖

一.安装环境及版本 CentOS 6.5 Python 3.6.1 二.安装依赖包 1.安装静态库 # yum install -y openssl-static 注:如果不安装该静态库,会导致python的pip安装失败 2.安装gcc # yum install -y gcc wget # yum groupinstall "Development tools" # yum install zlib-devel bzip2-devel openssl-devel ncurses-d

原文来源: https://stackoverflow.com/questions/8087184/installing-python-3-on-rhel 很容易手动安装. 1.下载对应的python版本(可以从Python.org上下载) wget https://www.python.org/ftp/python/3.4.3/Python-3.4.3.tar.xz 2.解压缩 $ tar xf Python-3.* $ cd Python-3.* 3.准备编译 $ ./configure 构

yum install libffi-devel openssl -y wget https://www.python.org/ftp/python/3.7.4/Python-3.7.4.tgz tar xf Python-3.7.4.tgz cd Python-3.7.4 ./configure --prefix=/usr/local/python3 && make -j4 && make install rm -rf Python-3.7.4* 添加环境变量 cat /

一.Nginx安装(基于ubuntu17.10 版本) 首先我们是基于源码安装,主要有如下步骤 1.安装依赖包 1.安装gcc g++的依赖库 sudo apt-get install build-essential sudo apt-get install libtool 2.安装pcre依赖库 sudo apt-get update sudo apt-get install libpcre3 libpcre3-dev 3.安装zlib依赖库 sudo apt-get install zlib

前两天自己在笔记本上装了CentOs版本的虚拟机,接着要装Python3,是源码安装的挺费劲,个人总结了一些源码安装的经验,今天在这里给大家分享一下. 1. 首先准备环境,安装必要的编译工具gcc glibc make. 安装命令: yum install gcc-* glibc-* make -y 2. 下载python3的源码包,下载地址:   https://www.python.org/downloads/mac-osx/ 解包: tar xvf python-3.5.2.tar.gz

Python3.7 源码安装 ModuleNotFoundError: No module named '_ctypes' 解决记录 源码安装时报错 File "/home/abeenserver/netsource/Python-3.7.0/Lib/ctypes/__init__.py", line 7, in <module> from _ctypes import Union, Structure, Array ModuleNotFoundError: No modu

CentOS6源码安装vim8 vim8相比vim7多了很多功能. 不过需要源码来进行安装. 移除旧版本的vim yum remove vim 安装依赖库 sudo yum install -y ruby ruby-devel lua lua-devel luajit \ luajit-devel ctags git python python-devel \ python3 python3-devel tcl-devel \ perl perl-devel perl-ExtUtils-Pars

为什么需要源码安装? 1. 对 Python 版的 OpenCV,Ubuntu 有两种安装方式: 源码安装:官网(https://opencv.org/releases.html)下载源代码,在机器上编译安装 只库文件安装:安装由 Ubuntu 社区人员已经编译好的库文件 pip3 install opencv-python " opencv-contrib 是 opencv 的扩充 注: 库文件(cv2.so)安装路径:/usr/local/lib/python3.5/dist-package