Jenkins在初次使用时, 一直卡住, 无论如何也不出现输入用户名密码. 忘记截图, 下次出现更新图示. 解决方案: 需要你进入Jenkins的工作目录,打开 hudson.model.UpdateCenter.xml 把 http://updates.jenkins-ci.org/update-center.json 改成 http://mirror.xmission.com/jenkins/updates/update-center.json 重启Jenkins. 不生效的话, 就重启电脑

通过RPM安装Jenkins简单方便,不太需要复杂的过程,但是在安装完成以后启动Jenkins的时候提示“Starting jenkins (via systemctl): Job for jenkins.service failed because the control process exited with error code. See "systemctl status jenkins.service" and "journalctl -xe" for d

thinkphp 在Apache上配置启用伪静态,重启Apache1 restart 竟然失败了,报错 Job for httpd.service failed because the control process exited with error code. See "systemctl status httpd.service" and "journalctl -xe" for details 嗯,看状态 执行命令 systemctl status http

一.启动失败 1.启动docker [root@localhost ~]# systemctl start docker Job for docker.service failed because the control process exited with error code. See "systemctl status docker.service" and "journalctl -xe " for details. 上面表示输入 systemctl st

centos 启动docker服务报错: Job for docker.service failed because the control process exited with error code. See "systemctl status docker.service" and "journalctl -xe" for details. 1,create daemon.json in /etc/docker/ 2, put this in it: { &q

linux下重启网卡使用命令 : service network restart 时报错: [root@slave01 hadoop]# service network restart Starting network (via systemctl): Job for network.service failed because the control process exited with error code. See "systemctl status network.service&qu

[root@web01 ~]#  systemctl start php-fpm Job for php-fpm.service failed because the control process exited with error code. See "systemctl status php-fpm.service" and "journalctl -xe" for details. [root@web01 ~]#  systemctl status php-

一.背景 这个错误在重启nginx或者启动nginx的时候,经常会出现.我之前也一直认为出现这个错误是因为有程序占用了nginx的进程.但是知其然不知其所以然.每次报错都有点懵逼,所以这边一步步排查错误,做个记录. 二.排错过程 1.按照提示 //按照提示,执行此命令,查看错误原因 systemctl status nginx.service 由报错信息可知,nginx绑定80端口失败.详细错误请输入 -l 继续查看 2.继续跟踪错误 //查看错误的详情 systemctl status ngi

环境:Ubuntu 16.04.1 + Django  1.11.15 + Apache 2.4.18 + python 3.5 此篇文章内容提到的第几步,对照以下链接中的步骤 百度云的ubuntu16.04.1部署Apache服务器+Django项目 将项目搭建到云主机上,第四步重启apache报的错 报错信息: Job for apache2.service failed because the control process exited with error code. See "sys

Case: ubuntu在从Ubuntu 16.04 LTS 升级到18.04 的时候,执行 do-release-upgrade -d 后,发现ssh无法登陆服务器, Solution: 1.通过ssh -v root@77.75.154.11,发现如下报错: OpenSSH_7.2p2 Ubuntu-4ubuntu2.4, OpenSSL 1.0.2g 1 Mar 2016debug1: Reading configuration data /etc/ssh/ssh_configdebug1

安装报错的提示:systemctl status docker.service 好吧,原来是缺少库文件.验证一下想法吧,yum -y install libseccomp 成功后,再启动docker发现成功了,好,那就下载libseccomp的rpm包吧.

问题出现 :入手操作Docker时,安装启动后报了这个错 Job for docker.service failed because the control process exited with error code. See "systemctl status do cker.service" and "journalctl -xe" for details. 定位问题 :根据提示输入“systemctl status do cker.service”,回车,出

一.前言 Job for mysqld.service failed because the control process exited with error code. See "systemctl status mysqld.service" and "journalctl -xe" for details. 这个问题实在 Linux 中使用 Supervisor 遇见的. 二.解决方案 使用 netstat -ntpl 把有关 python 的端口都杀掉,然

1).在linux虚拟机上安装docker步骤:1.检查内核版本,必须是3.10及以上uname ‐r2.安装dockeryum install docker3.输入y确认安装4.启动docker[root@localhost ~]# systemctl start docker[root@localhost ~]# docker ‐vDocker version 1.12.6, build 3e8e77d/1.12.65.开机启动docker[root@localhost ~]# system

首次接触nginx,安装完使用命令 service nignx restart  后,出现这个错误,并按照提示给出的命令查看错误详情  systemctl status nginx.service   : 从详情可以看到: (98:address already in use),说明端口已经被占用了,我们来看下是什么东西占用了端口吧: 输入命令: netstat -apn|grep :80 可以看到13929/httpd服务占用了80端口,需要将这个服务关闭,(我尝试使用kill杀死进程,但是无

Job for network.service failed because the control process exited with error code >**[root@mina0 hadoop]# systemctl restart network Job for network.service failed because the control process exited with error code. See "systemctl status network.se

在Liunx中使用Docker, 注: Liunx使用的是在虚拟机下的centOS7版本在刚开始安装Docker时没有任何错误, 但是在后续的docker启动过程中, 出现以下问题: [root@zk2 docker]# service docker start Redirecting to /bin/systemctl start docker.service Job for docker.service failed because the control process exited wi

安装docker时,自己添加了国内的hub.docker.com镜像 [root@ce-docker ~]# systemctl restart docker 出现以下报错:Job for docker.service failed because start of the service was attempted too often. See "systemctl status docker.service" and "journalctl -xe" for d

1.按照提示 systemctl status ssh.service 查看报错原因 sshd -t 2.结果 /etc/ssh/sshd_config line 34: missing argument. 该文件的34行有错误修改即可 [原图]

centos7 mariadb 安装 也可解决此错误:ob for mariadb.service failed because the control process exited with error code. See "systemctl status mariadb.service" and "journalctl -xe" for details 第一步:删除原有 内容 yum remove mariadb* -- 彻底卸载 mariadb 第二步:安装

linux菜鸡的时候,总是为了配置网络而烦恼,重启网卡的原因有很多,我这次是因为配置了固定IP[使用第三方工具连接]所以需要重启网卡,出现 Job for networking.service failed because the control process exited with error code. See "systemctl status networking.service" and "journalctl -xe" for details,网上搜索