报错信息如下:

org.springframework.beans.factory.BeanCreationNotAllowedException: Error creating bean with name 'eurekaAutoServiceRegistration': Singleton bean creation not allowed while singletons of this factory are in destruction (Do not request a bean from a BeanFactory in a destroy method implementation!)
at org.springframework.beans.factory.support.DefaultSingletonBeanRegistry.getSingleton(DefaultSingletonBeanRegistry.java:216) [spring-beans-4.3.10.RELEASE.jar:4.3.10.RELEASE]
at org.springframework.beans.factory.support.AbstractBeanFactory.doGetBean(AbstractBeanFactory.java:302) ~[spring-beans-4.3.10.RELEASE.jar:4.3.10.RELEASE]
at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:197) ~[spring-beans-4.3.10.RELEASE.jar:4.3.10.RELEASE]
at org.springframework.context.support.AbstractApplicationContext.getBean(AbstractApplicationContext.java:1078) [spring-context-4.3.10.RELEASE.jar:4.3.10.RELEASE]
at org.springframework.context.event.ApplicationListenerMethodAdapter.getTargetBean(ApplicationListenerMethodAdapter.java:283) ~[spring-context-4.3.10.RELEASE.jar:4.3.10.RELEASE]
at org.springframework.context.event.ApplicationListenerMethodAdapter.doInvoke(ApplicationListenerMethodAdapter.java:253) ~[spring-context-4.3.10.RELEASE.jar:4.3.10.RELEASE]
at org.springframework.context.event.ApplicationListenerMethodAdapter.processEvent(ApplicationListenerMethodAdapter.java:177) ~[spring-context-4.3.10.RELEASE.jar:4.3.10.RELEASE]
at org.springframework.context.event.ApplicationListenerMethodAdapter.onApplicationEvent(ApplicationListenerMethodAdapter.java:140) ~[spring-context-4.3.10.RELEASE.jar:4.3.10.RELEASE]
at org.springframework.context.event.SimpleApplicationEventMulticaster.invokeListener(SimpleApplicationEventMulticaster.java:167) ~[spring-context-4.3.10.RELEASE.jar:4.3.10.RELEASE]
at org.springframework.context.event.SimpleApplicationEventMulticaster.multicastEvent(SimpleApplicationEventMulticaster.java:139) ~[spring-context-4.3.10.RELEASE.jar:4.3.10.RELEASE]
at org.springframework.context.support.AbstractApplicationContext.publishEvent(AbstractApplicationContext.java:393) [spring-context-4.3.10.RELEASE.jar:4.3.10.RELEASE]
at org.springframework.context.support.AbstractApplicationContext.publishEvent(AbstractApplicationContext.java:399) [spring-context-4.3.10.RELEASE.jar:4.3.10.RELEASE]
at org.springframework.context.support.AbstractApplicationContext.publishEvent(AbstractApplicationContext.java:347) [spring-context-4.3.10.RELEASE.jar:4.3.10.RELEASE]
at org.springframework.context.support.AbstractApplicationContext.doClose(AbstractApplicationContext.java:991) [spring-context-4.3.10.RELEASE.jar:4.3.10.RELEASE]
at org.springframework.context.support.AbstractApplicationContext.close(AbstractApplicationContext.java:958) [spring-context-4.3.10.RELEASE.jar:4.3.10.RELEASE]
at org.springframework.cloud.context.named.NamedContextFactory.destroy(NamedContextFactory.java:76) [spring-cloud-context-1.2.3.RELEASE.jar:1.2.3.RELEASE]
at org.springframework.beans.factory.support.DisposableBeanAdapter.destroy(DisposableBeanAdapter.java:272) [spring-beans-4.3.10.RELEASE.jar:4.3.10.RELEASE]
at org.springframework.beans.factory.support.DefaultSingletonBeanRegistry.destroyBean(DefaultSingletonBeanRegistry.java:578) [spring-beans-4.3.10.RELEASE.jar:4.3.10.RELEASE]
at org.springframework.beans.factory.support.DefaultSingletonBeanRegistry.destroySingleton(DefaultSingletonBeanRegistry.java:554) [spring-beans-4.3.10.RELEASE.jar:4.3.10.RELEASE]
at org.springframework.beans.factory.support.DefaultListableBeanFactory.destroySingleton(DefaultListableBeanFactory.java:961) [spring-beans-4.3.10.RELEASE.jar:4.3.10.RELEASE]
at org.springframework.beans.factory.support.DefaultSingletonBeanRegistry.destroySingletons(DefaultSingletonBeanRegistry.java:523) [spring-beans-4.3.10.RELEASE.jar:4.3.10.RELEASE]
at org.springframework.beans.factory.support.FactoryBeanRegistrySupport.destroySingletons(FactoryBeanRegistrySupport.java:230) [spring-beans-4.3.10.RELEASE.jar:4.3.10.RELEASE]
at org.springframework.beans.factory.support.DefaultListableBeanFactory.destroySingletons(DefaultListableBeanFactory.java:968) [spring-beans-4.3.10.RELEASE.jar:4.3.10.RELEASE]
at org.springframework.context.support.AbstractApplicationContext.destroyBeans(AbstractApplicationContext.java:1030) [spring-context-4.3.10.RELEASE.jar:4.3.10.RELEASE]
at org.springframework.context.support.AbstractApplicationContext.doClose(AbstractApplicationContext.java:1006) [spring-context-4.3.10.RELEASE.jar:4.3.10.RELEASE]
at org.springframework.context.support.AbstractApplicationContext.close(AbstractApplicationContext.java:958) [spring-context-4.3.10.RELEASE.jar:4.3.10.RELEASE]
at org.springframework.boot.actuate.endpoint.ShutdownEndpoint$1.run(ShutdownEndpoint.java:74) [spring-boot-actuator-1.5.6.RELEASE.jar:1.5.6.RELEASE]
at java.lang.Thread.run(Thread.java:748) [na:1.8.0_131]

原因:

根本原因是关闭ApplicationContext时,它将销毁所有单例bean,eurekaAutoServiceRegistration首先销毁,然后销毁feignContext。销毁feignContext时,它将关闭与每个FeignClient关联的ApplicationContext。由于eurekaAutoServiceRegistration监听ContextClosedEvent,因此这些事件将发送到该bean。不幸的是,由于它已被销毁,因此我们得到了上述异常(尝试在销毁中创建bean)。

解决方法:

@Component
public class FeignBeanFactoryPostProcessor implements BeanFactoryPostProcessor { @Override
public void postProcessBeanFactory(ConfigurableListableBeanFactory beanFactory) throws BeansException {
if (containsBeanDefinition(beanFactory, "feignContext", "eurekaAutoServiceRegistration")) {
BeanDefinition bd = beanFactory.getBeanDefinition("feignContext");
bd.setDependsOn("eurekaAutoServiceRegistration");
}
} private boolean containsBeanDefinition(ConfigurableListableBeanFactory beanFactory, String... beans) {
return Arrays.stream(beans).allMatch(b -> beanFactory.containsBeanDefinition(b));
}
}

SpringCloud:eureka的'eurekaAutoServiceRegistration'报错解决方法的更多相关文章

  1. eclipse创建的maven项目,pom.xml文件报错解决方法

    [错误一:]maven 编译级别过低 [解决办法:] 使用 maven-compiler-plugin 将 maven 编译级别改为 jdk1.6 以上: <!-- java编译插件 --> ...

  2. MyEclipse Server view报错解决方法

    MyEclipse Server view报错解决方法 方法/步骤     启动MyEclipse,弹出一个框,报错. ---------------------------------------- ...

  3. Loadrunner参数化逗号报错解决方法

    Loadrunner参数化逗号报错解决方法     介绍Loadrunner参数化时,参数中包含有逗号时出错的解决方法. 在Loadrunner进行参数化时,参数中如果含有逗号,编辑保存后会报错: 此 ...

  4. Android Studio support 26.0.0-alpha1 Failed to resolve: com.android.support:appcompat-v7:27.+ 报错解决方法

    AS下如何生成自定义的.jks签名文件, 以及如何生成数字签名 链接:http://www.cnblogs.com/smyhvae/p/4456420.html 链接:http://blog.csdn ...

  5. iOS url带中文下载时 报错解决方法

    问题描述:下载文件时, 请求带中文的URL的资源时,比如:http://s237.sznews.com/pic/2010/11/23/e4fa5794926548ac953a8a525a23b6f2/ ...

  6. jquery jssdk分享报错解决方法

    jssdk分享报错解决方法 一般都是参数传错了

  7. django.db.utils.InternalError: (1060, "Duplicate column name 'user_id'")迁移报错解决方法

    django.db.utils.InternalError: (1060, "Duplicate column name 'user_id'")迁移报错解决方法 django.db ...

  8. create-react-app创建项目后,运行npm run eject报错解决方法

    运行npm run eject报错解决方法 主要问题是脚手架添加.gitgnore文件,但是却没有本地仓库,使用以下命令操作以下就可以了 git init git add . git commit - ...

  9. 打开struts-config.xml 报错 解决方法Could not open the editor

    打开struts-config.xml 报错 解决办法Could not open the editor 错误信息:Could not open the editor: Project XXX is ...

随机推荐

  1. 转载 https://www.cnblogs.com/bobo-pcb/p/11708459.html

    https://www.cnblogs.com/bobo-pcb/p/11708459.html #### 1 用VMware 15.0+win10企业版 1次安装成功 20200124 2 不要用v ...

  2. SQL注入和XSS攻击

    SQL注入 定义:黑客通过在请求的数据中填入特殊字符,影响服务器数据库操作程序正常执行,从而达到攻击的目的. 形式: 拼接SQL: 登录验证:前台输入 username:yan password:12 ...

  3. SqlServer事务详解(事务隔离性和隔离级别详解)

    概述 不少人对于事务的使用局限于begin transaction:开始事务.commit transaction:提交事务.rollback transaction:回滚事务的初步运用. 并且知道使 ...

  4. MySQL之数据查询语言(DQL)

    数据查询语言DQL基本结构是由SELECT子句,FROM子句,WHERE子句组成的查询块: SELECT <字段> FROM <表名> WHERE <查询条件> - ...

  5. LATEX如何写多个条件推导式推出一个结论

    用markdown写推导式的时候,不太好写,故做个笔记记录一下,插入 公式块 : \left. \begin{aligned} \left. \begin{aligned} \text{这里可以写文字 ...

  6. CodeGen结构循环回路

    CodeGen结构循环回路 structure循环是一个模板文件构造,它允许您迭代CodeGen拥有的有关结构的集合.为了使用结构循环,必须同时基于多个存储库结构生成代码. CodeGen可以通过以下 ...

  7. RGBD动作识别的多视图层融合模型

    摘要 基于视觉的动作识别在实践中遇到了不同的挑战,包括从任何角度识别主题,实时处理数据以及在现实环境中提供隐私.甚至识别基于配置文件的人类动作(基于视觉的动作识别的一个子集),在计算机视觉中也是一个巨 ...

  8. runtime系统的Cello

    runtime系统的Cello 通过充当一个现代的.功能强大的runtime系统,Cello使许多以前在C中不切实际或笨拙的事情变得简单,例如: 通用数据结构 多态函数 接口/类型类 构造函数/析构函 ...

  9. Net Core 5.0 部署IIS错误-500.31-Failed to load ASP.NET Core runtime

    Windows Server 2008 R2不支持.net core 3.0版本及以后更新的各个版本. 面对如上图提示,第一想到的就是服务器安装的SDK或者hosting版本有问题,第一时间检查了安装 ...

  10. Jmeter(五十二) - 从入门到精通高级篇 - jmeter之跨线程组传递参数(详解教程)

    1.简介 之前分享的所有文章都是只有一个线程组,而且参数的传递也只在一个线程组中,那么如果需要在两个线程组中传递参数,我们怎么做呢?宏哥今天就给小伙伴或者童鞋们讲解一下,如何实现在线程组之间传递参数. ...