自学huawei之路-6005-8AP设备启动界面

返回自学Huawei之路

自学huawei之路-AC6005-8AP设备启动界面

[YK-MES-MASTER]

Please check whether system data has been changed, and save data in time

Configuration console time out, please press any key to log on

************************************************************
********************** ********* *********************
******************** ******* *******************
****************** ******* *****************
*********** *** ***** *** **********
********* *** ***** ***
UBOOT Current Ver:314, File Ver: 314
LZMA: Uncompressing ... OK!
argv[1]: root=/dev/mtdblock4
argv[2]: rootfstype=squashfs
argv[3]: mtdparts=octeon_nor0:1024k(boot0)ro,1024k(boot1)ro,4m(flags),4m(kernel),6016k(squashfs),128k(environment)ro
argv[4]: phram=phram,1792Mi,256Mi
argv[5]: numcores=4
argv[6]: isolcpus=1-3
Allocating memory for ELF segment: addr: 0xffffffff80100000 (adjusted to: 0x100000), size 0xf5a8c0
## Loading big-endian Linux kernel with entry point: 0xffffffff80105c30 ...
Bootloader: Done loading app on coremask: 0xf
Starting cores 0xf
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.34.15-WR4.3.0.0_standard (gcc version 4.4.1 (Wind River Linux Sourcery G++ 4.4a-445) )
#1 SMP PREEMPT Thu Mar 31 11:41:25 CST 2016
Shadow copy of L2C_ERR_TTGX[NOWAY]
Writes of 1 also clear L2C_ERR_TTGX[NOWAY]
CVMSEG size: 1 cache lines (128 bytes)
bootconsole [early0] enabled
CPU revision is: 000d9301 (Cavium Octeon II)
Checking for the multiply/shift bug... no.
Checking for the daddiu bug... no.
...no need to free any memory
Determined physical RAM map:
memory: 000000000004d000 at 0000000000f23000 (usable after init)
memory: 000000000ec00000 at 0000000001100000 (usable)
memory: 000000006f400000 at 0000000020000000 (usable)
Wasting 217000 bytes for tracking 3875 unused pages
Initrd not found or empty - disabling initrd
Using passed Device Tree.
Zone PFN ranges:
DMA32 0x00000f23 -> 0x000f0000
Normal empty
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000f23 -> 0x00000f70
0: 0x00001100 -> 0x0000fd00
0: 0x00020000 -> 0x0008f400
Cavium Hotplug: Available coremask 0x0
init_bsp_adapter ......init_bsp_adapter ...OK
PERCPU: Embedded 11 pages/cpu @a800000002d7f000 s15872 r8192 d20992 u65536
pcpu-alloc: s15872 r8192 d20992 u65536 alloc=16*4096
pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 508203
Kernel command line: bootoctlinux root=/dev/mtdblock4 rootfstype=squashfs mtdparts=octeon_nor0:1024k(boot0)ro,1024k(boot1)ro,4m(flags),4m(kernel),6016k(squashfs),128k(environment)ro phram=phram,1792Mi,256Mi numcores=4 isolcpus=1-3 console=ttyS0,9600
PID hash table entries: 4096 (order: 3, 32768 bytes)
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Primary instruction cache 37kB, virtually tagged, 37 way, 8 sets, linesize 128 bytes.
Primary data cache 32kB, 32-way, 8 sets, linesize 128 bytes.
Secondary unified cache 1024kB, 16-way, 512 sets, linesize 128 bytes.
FWD_MEM: aligned address a800000020000000
FWD_MEM: Allocating 1200MB (307200 pages) of memory at addr a800000020000000
Memory: 803188k/2064692k available (5836k kernel code, 1261504k reserved, 8637k data, 308k init, 0k highmem)
SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
RCU-based detection of stalled CPUs is enabled.
NR_IRQS:197
allocated 25165824 bytes of page_cgroup
please try 'cgroup_disable=memory,blkio' option if you don't want memory and blkio cgroups
Calibrating delay loop (skipped) preset value.. 2000.00 BogoMIPS (lpj=4000000)
Security Framework initialized
Mount-cache hash table entries: 256
Initializing cgroup subsys debug
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys blkio
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Checking for the daddi bug... no.
Init trace_clock_cyc2ns: precalc_mult = 256, precalc_shift = 8
SMP: Booting CPU01 (CoreId 1)...
CPU revision is: 000d9301 (Cavium Octeon II)
SMP: Booting CPU02 (CoreId 2)...
CPU revision is: 000d9301 (Cavium Octeon II)
SMP: Booting CPU03 (CoreId 3)...
CPU revision is: 000d9301 (Cavium Octeon II)
Brought up 4 CPUs
devtmpfs: initialized
NET: Registered protocol family 16
check_res_of_trace_clock: sched_clock() high resolution
bio: create slab <bio-0> at 0
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Switching to clocksource OCTEON_CVMCOUNT
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
UDP hash table entries: 1024 (order: 3, 32768 bytes)
UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
NET: Registered protocol family 1
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
octeon_gpio 1070000000800.gpio-controller: probed
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
squashfs: version 4.0 (2009/01/31) Phillip Lougher
msgmni has been set to 1568
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
LTT : ltt-relay init
octeon_rng octeon_rng: Octeon Random Number Generator
Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
brd: module loaded
loop: module loaded
mdio-octeon: probed
mdio-octeon 1180000001800.mdio: Version 1.0
mdio-octeon: probed
mdio-octeon 1180000001900.mdio: Version 1.0
console [netcon0] enabled
netconsole: network logging started
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
octeon-ehci 16f0000000000.ehci: Octeon EHCI
octeon-ehci 16f0000000000.ehci: new USB bus registered, assigned bus number 1
octeon-ehci 16f0000000000.ehci: irq 154, io mem 0x16f0000000000
octeon-ehci 16f0000000000.ehci: USB 0.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
octeon-ohci 16f0000000400.ohci: Octeon OHCI
octeon-ohci 16f0000000400.ohci: new USB bus registered, assigned bus number 2
octeon-ohci 16f0000000400.ohci: irq 154, io mem 0x16f0000000400
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
i2c-gpio i2c-gpio.2: using pins 8 (SDA) and 7 (SCL, no clock stretching)
rtc-ds3232 2-0068: rtc core: registered ds3232 as rtc0
i2c-gpio i2c-gpio.3: using pins 9 (SDA) and 10 (SCL, no clock stretching)
i2c-octeon 1180000001000.i2c: version 2.0
i2c-octeon 1180000001200.i2c: version 2.0
EDAC MC: Ver: 2.1.0 Mar 31 2016
EDAC DEVICE0: Giving out device to module 'octeon-cpu' controller 'co_cpu_err': DEV 'co_pc_edac.2' (INTERRUPT)
EDAC DEVICE1: Giving out device to module 'octeon-l2c' controller 'octeon_l2c_err': DEV 'co_l2c_edac.0' (POLLED)
EDAC MC0: Giving out device to 'octeon-lmc' 'co_lmc_err': DEV co_lmc_edac.1
IRQ 162/octeon_mmc: IRQF_DISABLED is not guaranteed on shared IRQs
TCP cubic registered
NET: Registered protocol family 17
L2 lock: TLB refill 256 bytes
L2 lock: General exception 128 bytes
L2 lock: low-level interrupt 128 bytes
L2 lock: interrupt 640 bytes
L2 lock: memcpy 1152 bytes
1180000000800.serial: ttyS0 at MMIO 0x1180000000800 (irq = 125) is a OCTEON
console [ttyS0] enabled, bootconsole disabled
console [ttyS0] enabled, bootconsole disabled
1180000000c00.serial: ttyS1 at MMIO 0x1180000000c00 (irq = 126) is a OCTEON
Bootbus flash: Setting flash for 16MB flash at 0x1ec00000
octeon_nor0: Found 1 x16 devices at 0x0 in 16-bit bank
Amd/Fujitsu Extended Query Table at 0x0040
octeon_nor0: CFI does not contain boot bank location. Assuming top.
number of CFI chips: 1
6 cmdlinepart partitions found on MTD device octeon_nor0
Creating 6 MTD partitions on "octeon_nor0":
0x000000000000-0x000000100000 : "boot0"
0x000000100000-0x000000200000 : "boot1"
0x000000200000-0x000000600000 : "flags"
0x000000600000-0x000000a00000 : "kernel"
0x000000a00000-0x000000fe0000 : "squashfs"
0x000000fe0000-0x000001000000 : "environment"
rtc-ds3232 2-0068: setting system clock to 2018-08-23 07:46:35 UTC (1535010395)
VFS: Mounted root (squashfs filesystem) readonly on device 31:4.
devtmpfs: mounted
Freeing unused kernel memory: 308k freed
mmc0: host does not support reading read-only switch. assuming write-enable.
mmc0: new high speed SD card at address 0001
mmcblk0: mmc0:0001 uSD 1.91 GiB
starting pid 75, tty '': '/etc/init.d/rcS'
mount /dev/mmcblk0p1 /root
EXT3-fs (mmcblk0p1): warning: checktime reached, running e2fsck is recommended
EXT3-fs (mmcblk0p1): using internal journal
EXT3-fs (mmcblk0p1): recovery complete
EXT3-fs (mmcblk0p1): mounted filesystem with writeback data mode

sdcard mount finished!

tmpfs mount finished!

Filesystem 1K-blocks Used Available Use% Mounted on
/dev/root 5760 5760 0 100% /
devtmpfs 401592 0 401592 0% /dev
proc 0 0 0 0% /proc
sysfs 0 0 0 0% /sys
devpts 0 0 0 0% /dev/pts
tmpfs 401748 0 401748 0% /dev/shm
/dev/mmcblk0p1 1969388 91952 1777396 5% /root
tmpfs 8192 0 8192 0% /mnt/datasync

Mount vos-squashfs!
Mount fsimage type: vos
MTD flag device : /dev/mtd2
User fs folder : /root
Loop device : /dev/loop0
Mount folder : /mnt/vos
File Name: sdcard:/AC6005V200R006C10SPC200.cc
Current CC file: /root/AC6005V200R006C10SPC200.cc
Find sub file(ID: 0x100000a).
Sub file offset: 0x8cc6b4.
vos-squashfs mount finished, start system application!
Install kernel modules in /mnt/vos/modules!
####### 64Bit Kernel ##########
######## MSS Memory Device register success ########
MSS_PUB Version [1.07], build on Date : [Mar 31 2016], Time : [11:42:53]
MIMC_KERNEL: Module init.
Insmod I2C
Insmod SFP
Insmod AC_KERNEL_IF
Make device node for kernel modules!
Try to mount patch file!
Mount patch file!
Mount fsimage type: patch
MTD flag device : /dev/mtd2
User fs folder : /root
Loop device : /dev/loop1
Mount folder : /mnt/patch
File Name: sdcard:/AC6005V200R006C10SPH203.pat
Current Patch file: /root/AC6005V200R006C10SPH203.pat
Start system application!
cap32 start, build time 11:46:42
MSS_PUB Version [1.07], build on Date : [Mar 31 2016], Time : [1MSS Mem Device opened
1:46:11]
Mss_Mem_Open: g_MssMemAddr = 0x32000000, g_MssMemPhyAddr = 0x20000000, g_vir2phy_off = 0x12000000
Module MEM Init ...... OK!
Module DIAG Init ...... 10000000-10af9000 /mnt/vos/cap32
10c3f000-10c7f000 /mnt/vos/cap32
2b9f4000-2ba12000 /lib32/ld-2.11.1.so
2ba24000-2ba26000 /lib32/libdl-2.11.1.so
2ba37000-2ba3e000 /lib32/librt-2.11.1.so
2ba4f000-2bba6000 /lib32/libc-2.11.1.so
2bbc4000-2bbd9000 /lib32/libpthread-2.11.1.so
7fff7000-7fff8000 [vdso]
name [cap32.nm], item_num [7286], start_off[0]
name [ld], item_num [189], start_off[2b9f4000]
name [libc], item_num [2901], start_off[2ba4f000]
name [libdl], item_num [24], start_off[2ba24000]
name [librt], item_num [72], start_off[2ba37000]
name [libpthread], item_num [281], start_off[2bbc4000]
Total [6]
OK!
Module PBUF Init ...... OK!
Module IM Init ...... OK!
Module IIC Init ...... OK!
Module HAL Init ...... Interface 0 has 4 ports (SGMII)
Interface 1 has 4 ports (SGMII)
Interface 2 has 4 ports (NPI)
OK!
Module Timer Init ...... OK!
Module TIME Init ...... OK!
MSS_Global_Init success!
MSC Process run on core [0], PID = [132]
MSU Process run on core [1], PID = [133]
MSC_TCTL_Init Succ! u32Ret = 0
goto MSC Schedule
MSU Init OK
goto MSU Schedule
goto MSU Schedule
goto MSU Schedule

VOS_Start ......

PPI_DEV_SysInit begin.

CDEV_InitProduct Success !
octeon-ethernet 2.1.0

DEV_EVT_InitEvtData Success !

BSPPORT_InitNetifLib Success !

PPI_DEV_SysInit End.
MSS Mem Device opened
......OK

VRP_SockTm_Init create............OK
System recover configuration .......OK!

Press any key to get started

Login authentication

Password: