Spring源码分析之IOC的三种常见用法及源码实现（二）

Spring源码分析之IOC的三种常见用法及源码实现（二）

回顾上文 我们研究的是

       AnnotationConfigApplicationContext annotationConfigApplication = new AnnotationConfigApplicationContext (MainConfig.class);

       Person person2 = (Person)annotationConfigApplication.getBean("person2");

这两句话的实现，其中来到了主角儿AnnotationConfigApplicationContext的构造器实现:

public AnnotationConfigApplicationContext(Class<?>... annotatedClasses) {
	this();
	register(annotatedClasses);
	refresh();
}

其中this()和register(annotatedClasses);看完了，我们这次来看看refresh();

一、跟进refresh()的代码

	public void refresh() throws BeansException, IllegalStateException {
		synchronized (this.startupShutdownMonitor) {
			// Prepare this context for refreshing.
			prepareRefresh();

			// Tell the subclass to refresh the internal bean factory.
			ConfigurableListableBeanFactory beanFactory = obtainFreshBeanFactory();

			// Prepare the bean factory for use in this context.
			prepareBeanFactory(beanFactory);

			try {
				// Allows post-processing of the bean factory in context subclasses.
				postProcessBeanFactory(beanFactory);

				// Invoke factory processors registered as beans in the context.
				invokeBeanFactoryPostProcessors(beanFactory);

				// Register bean processors that intercept bean creation.
				registerBeanPostProcessors(beanFactory);

				// Initialize message source for this context.
				initMessageSource();

				// Initialize event multicaster for this context.
				initApplicationEventMulticaster();

				// Initialize other special beans in specific context subclasses.
				onRefresh();

				// Check for listener beans and register them.
				registerListeners();

				// Instantiate all remaining (non-lazy-init) singletons.
				finishBeanFactoryInitialization(beanFactory);

				// Last step: publish corresponding event.
				finishRefresh();
			}
			catch (BeansException ex) {
				if (logger.isWarnEnabled()) {
					logger.warn("Exception encountered during context initialization - " +
							"cancelling refresh attempt: " + ex);
				}
				// Destroy already created singletons to avoid dangling resources.
				destroyBeans();
				// Reset 'active' flag.
				cancelRefresh(ex);
				// Propagate exception to caller.
				throw ex;
			}
			finally {
				// Reset common introspection caches in Spring's core, since we
				// might not ever need metadata for singleton beans anymore...
				resetCommonCaches();
			}
		}
	}

讲这个之前铺垫一点前置基础知识

Spring中事件驱动开发

spring中是通过ApplicationListener及ApplicationEventMulticaster来进行事件驱动开发的，即实现观察者设计模式或发布-订阅模式。

ApplicationListener：监听容器中发布的事件，只要事件发生，就触发监听器的回调，来完成事件驱动开发。属于观察者设计模式中的Observer对象。

ApplicationEventMulticaster：用来通知所有的观察者对象，属于观察者设计模式中的Subject对象。

Spring后置处理器

BeanFactoryPostProcessor：继承这个的类它的实现方法可以在spring的bean定义好之后 而未实例化的时候做一些逻辑操作

BeanDefinitionRegistryPostProcessor：继承这个类它的实现方法可以在spring的bean未加载定义之前加些我们自己定义的bean定义

ok讲完了，回到代码。

我们铺垫了前置知识那么就对其中的

initApplicationEventMulticaster();

和

registerListeners();

进行讲解

二、refresh()中的initApplicationEventMulticaster

	protected void initApplicationEventMulticaster() {
		ConfigurableListableBeanFactory beanFactory = getBeanFactory();
		if (beanFactory.containsLocalBean(APPLICATION_EVENT_MULTICASTER_BEAN_NAME)) {
			this.applicationEventMulticaster =
					beanFactory.getBean(APPLICATION_EVENT_MULTICASTER_BEAN_NAME, ApplicationEventMulticaster.class);
			if (logger.isDebugEnabled()) {
				logger.debug("Using ApplicationEventMulticaster [" + this.applicationEventMulticaster + "]");
			}
		}
		else {
			this.applicationEventMulticaster = new SimpleApplicationEventMulticaster(beanFactory);
			beanFactory.registerSingleton(APPLICATION_EVENT_MULTICASTER_BEAN_NAME, this.applicationEventMulticaster);
			if (logger.isDebugEnabled()) {
				logger.debug("Unable to locate ApplicationEventMulticaster with name '" +
						APPLICATION_EVENT_MULTICASTER_BEAN_NAME +
						"': using default [" + this.applicationEventMulticaster + "]");
			}
		}
	}

非常好懂，就一个if else，首先获取beanfactory，翻看源码知道这个beanfactory就是上篇文章讲的初始化父类时创建的DefaultListableBeanFactory，拿到这玩意。还是围绕这玩意的功能操作

接下来判断beanfactory里是不是有这个APPLICATION_EVENT_MULTICASTER_BEAN_NAME，翻看源码：

public static final String APPLICATION_EVENT_MULTICASTER_BEAN_NAME = "applicationEventMulticaster";

是不是就是之前铺垫知识的listener？用来通知事件的。看看它在不在容器里面，不在的话走else创建一个，并且作为单例注册进去，在的话就从容器里面取出来赋值给当前this对象即我们的主角儿AnnotationConfigApplicationContext，而主角本身没定义这个是在主角父类AbstractApplicationContext里定义的，我们看看：

/** Helper class used in event publishing */
private ApplicationEventMulticaster applicationEventMulticaster;

看看，给了注释，辅助类 ：用于事件派发的。

综上所述，这个initApplicationEventMulticaster()这行代码就是获取事件通知发布类的，没有的话就以单例创建一个放到容器并拿给主角儿，否则就直接拿到给主角儿。接下来看另一个registerListeners();

三、refresh()中的registerListeners();

源码如下：

	protected void registerListeners() {
		// Register statically specified listeners first.
		for (ApplicationListener<?> listener : getApplicationListeners()) {
			getApplicationEventMulticaster().addApplicationListener(listener);
		}

		// Do not initialize FactoryBeans here: We need to leave all regular beans
		// uninitialized to let post-processors apply to them!
		String[] listenerBeanNames = getBeanNamesForType(ApplicationListener.class, true, false);
		for (String listenerBeanName : listenerBeanNames) {
			   getApplicationEventMulticaster().addApplicationListenerBean(listenerBeanName);
		}

		// Publish early application events now that we finally have a multicaster...
		Set<ApplicationEvent> earlyEventsToProcess = this.earlyApplicationEvents;
		this.earlyApplicationEvents = null;
		if (earlyEventsToProcess != null) {
			for (ApplicationEvent earlyEvent : earlyEventsToProcess) {
				getApplicationEventMulticaster().multicastEvent(earlyEvent);
			}
		}
	}

第一个for循环是把所有listener都加到Multicaster里了（它用来通知相关事件）。其中

	String[] listenerBeanNames = getBeanNamesForType(ApplicationListener.class, true, false);
	for (String listenerBeanName : listenerBeanNames) {
		   getApplicationEventMulticaster().addApplicationListenerBean(listenerBeanName);
	}

这个是从容器中拿ApplicationListener.class类型的，从名字也可以看出来getBeanForType，拿出来之后也放到Multicaster里（它用来通知相关事件），这也就是为什么我们可以自己实现ApplicationListener接口并且打上@Component注解之后能通知的原因了！它在这里加进去了。

最后一段是获取早期事件，获取了之后for循环进行触发事件。我们来看看它到底是个怎么触发的。

	Set<ApplicationEvent> earlyEventsToProcess = this.earlyApplicationEvents;
	this.earlyApplicationEvents = null;
	if (earlyEventsToProcess != null) {
		for (ApplicationEvent earlyEvent : earlyEventsToProcess) {
			getApplicationEventMulticaster().multicastEvent(earlyEvent);
		}
	}

打开里面的multicastEvent方法

	@Override
	public void multicastEvent(ApplicationEvent event) {
		multicastEvent(event, resolveDefaultEventType(event));
	}

	public void multicastEvent(final ApplicationEvent event, ResolvableType eventType) {
		ResolvableType type = (eventType != null ? eventType : resolveDefaultEventType(event));
		for (final ApplicationListener<?> listener : getApplicationListeners(event, type)) {
			Executor executor = getTaskExecutor();
			if (executor != null) {
				executor.execute(new Runnable() {
					@Override
					public void run() {
						invokeListener(listener, event);
					}
				});
			}
			else {
				invokeListener(listener, event);
			}
		}
	}

一个解析类型、一个执行invokeListener，进去再看看这个咋invokeListener调用的

	protected void invokeListener(ApplicationListener listener, ApplicationEvent event) {
		ErrorHandler errorHandler = getErrorHandler();
		if (errorHandler != null) {
			try {
				listener.onApplicationEvent(event);
			}
			catch (Throwable err) {
				errorHandler.handleError(err);
			}
		}
		else {
			try {
				listener.onApplicationEvent(event);
			}
			catch (ClassCastException ex) {
				String msg = ex.getMessage();
				if (msg == null || msg.startsWith(event.getClass().getName())) {
					// Possibly a lambda-defined listener which we could not resolve the generic event type for
					Log logger = LogFactory.getLog(getClass());
					if (logger.isDebugEnabled()) {
						logger.debug("Non-matching event type for listener: " + listener, ex);
					}
				}
				else {
					throw ex;
				}
			}
		}
	}

仔细看下就发现重点了，其实最终就是调用listener.onApplicationEvent(event);，而这个onApplicationEvent就是ApplicationListener接口唯一的方法。换句话说，你只要实现这个接口类，并加入@Compent加入容器中，就会调用你实现类的onApplicationEvent里你自己的代码！

可能细心的同学会发现刚刚前面看到的registerListeners中最后一段里获取的是earlyApplicationEvents，这个early是什么意思？实际上是把Multicaster还没创建时就已经缓存的事件给获取播放，因为之前来了事件也不能丢掉啊。那么什么时候会有这个early事件呢？实际上是在refresh()代码里的registerListeners方法的前一句onRefresh方法中，这个方法默认是没有early事件的，会在springboot中使用.

至此registerListeners方法也讲完了。

接下来我们来讲讲refresh()中的invokeBeanFactoryPostProcessors(beanFactory);

四、refresh()中的invokeBeanFactoryPostProcessors(beanFactory);

	/**
	 * 按照明确的顺序实例化并调用所有在BeanFactoryPostProcessor注册的bean
	 * <p>Must be called before singleton instantiation.
	 */
	protected void invokeBeanFactoryPostProcessors(ConfigurableListableBeanFactory beanFactory) {
		PostProcessorRegistrationDelegate.invokeBeanFactoryPostProcessors(beanFactory, getBeanFactoryPostProcessors());

		// Detect a LoadTimeWeaver and prepare for weaving, if found in the meantime
		// (e.g. through an @Bean method registered by ConfigurationClassPostProcessor)
		if (beanFactory.getTempClassLoader() == null && beanFactory.containsBean(LOAD_TIME_WEAVER_BEAN_NAME)) {

			beanFactory.addBeanPostProcessor(new LoadTimeWeaverAwareProcessor(beanFactory));

			beanFactory.setTempClassLoader(new ContextTypeMatchClassLoader(beanFactory.getBeanClassLoader()));
		}
	}

很明显继续跟进这个invokeBeanFactoryPostProcessors同名方法：

	public static void invokeBeanFactoryPostProcessors(
			ConfigurableListableBeanFactory beanFactory, List<BeanFactoryPostProcessor> beanFactoryPostProcessors) {

		// Invoke BeanDefinitionRegistryPostProcessors first, if any.
		Set<String> processedBeans = new HashSet<String>();

		if (beanFactory instanceof BeanDefinitionRegistry) {
			BeanDefinitionRegistry registry = (BeanDefinitionRegistry) beanFactory;
			List<BeanFactoryPostProcessor> regularPostProcessors = new LinkedList<BeanFactoryPostProcessor>();
			List<BeanDefinitionRegistryPostProcessor> registryPostProcessors =
					new LinkedList<BeanDefinitionRegistryPostProcessor>();

			for (BeanFactoryPostProcessor postProcessor : beanFactoryPostProcessors) {
				if (postProcessor instanceof BeanDefinitionRegistryPostProcessor) {
					BeanDefinitionRegistryPostProcessor registryPostProcessor =
							(BeanDefinitionRegistryPostProcessor) postProcessor;
					registryPostProcessor.postProcessBeanDefinitionRegistry(registry);
					registryPostProcessors.add(registryPostProcessor);
				}
				else {
					regularPostProcessors.add(postProcessor);
				}
			}

			// Do not initialize FactoryBeans here: We need to leave all regular beans
			// uninitialized to let the bean factory post-processors apply to them!
			// Separate between BeanDefinitionRegistryPostProcessors that implement
			// PriorityOrdered, Ordered, and the rest.
			String[] postProcessorNames =
					beanFactory.getBeanNamesForType(BeanDefinitionRegistryPostProcessor.class, true, false);

			// First, invoke the BeanDefinitionRegistryPostProcessors that implement PriorityOrdered.
			List<BeanDefinitionRegistryPostProcessor> priorityOrderedPostProcessors = new ArrayList<BeanDefinitionRegistryPostProcessor>();
			for (String ppName : postProcessorNames) {
				if (beanFactory.isTypeMatch(ppName, PriorityOrdered.class)) {
					priorityOrderedPostProcessors.add(beanFactory.getBean(ppName, BeanDefinitionRegistryPostProcessor.class));
					processedBeans.add(ppName);
				}
			}
			sortPostProcessors(beanFactory, priorityOrderedPostProcessors);
			registryPostProcessors.addAll(priorityOrderedPostProcessors);
			invokeBeanDefinitionRegistryPostProcessors(priorityOrderedPostProcessors, registry);

			// Next, invoke the BeanDefinitionRegistryPostProcessors that implement Ordered.
			postProcessorNames = beanFactory.getBeanNamesForType(BeanDefinitionRegistryPostProcessor.class, true, false);
			List<BeanDefinitionRegistryPostProcessor> orderedPostProcessors = new ArrayList<BeanDefinitionRegistryPostProcessor>();
			for (String ppName : postProcessorNames) {
				if (!processedBeans.contains(ppName) && beanFactory.isTypeMatch(ppName, Ordered.class)) {
					orderedPostProcessors.add(beanFactory.getBean(ppName, BeanDefinitionRegistryPostProcessor.class));
					processedBeans.add(ppName);
				}
			}
			sortPostProcessors(beanFactory, orderedPostProcessors);
			registryPostProcessors.addAll(orderedPostProcessors);
			invokeBeanDefinitionRegistryPostProcessors(orderedPostProcessors, registry);

			// Finally, invoke all other BeanDefinitionRegistryPostProcessors until no further ones appear.
			boolean reiterate = true;
			while (reiterate) {
				reiterate = false;
				postProcessorNames = beanFactory.getBeanNamesForType(BeanDefinitionRegistryPostProcessor.class, true, false);
				for (String ppName : postProcessorNames) {
					if (!processedBeans.contains(ppName)) {
						BeanDefinitionRegistryPostProcessor pp = beanFactory.getBean(ppName, BeanDefinitionRegistryPostProcessor.class);
						registryPostProcessors.add(pp);
						processedBeans.add(ppName);
						pp.postProcessBeanDefinitionRegistry(registry);
						reiterate = true;
					}
				}
			}

			// Now, invoke the postProcessBeanFactory callback of all processors handled so far.
			invokeBeanFactoryPostProcessors(registryPostProcessors, beanFactory);
			invokeBeanFactoryPostProcessors(regularPostProcessors, beanFactory);
		}

		else {
			// Invoke factory processors registered with the context instance.
			invokeBeanFactoryPostProcessors(beanFactoryPostProcessors, beanFactory);
		}

		// Do not initialize FactoryBeans here: We need to leave all regular beans
		// uninitialized to let the bean factory post-processors apply to them!
		String[] postProcessorNames =
				beanFactory.getBeanNamesForType(BeanFactoryPostProcessor.class, true, false);

		// Separate between BeanFactoryPostProcessors that implement PriorityOrdered,
		// Ordered, and the rest.
		List<BeanFactoryPostProcessor> priorityOrderedPostProcessors = new ArrayList<BeanFactoryPostProcessor>();
		List<String> orderedPostProcessorNames = new ArrayList<String>();
		List<String> nonOrderedPostProcessorNames = new ArrayList<String>();
		for (String ppName : postProcessorNames) {
			if (processedBeans.contains(ppName)) {
				// skip - already processed in first phase above
			}
			else if (beanFactory.isTypeMatch(ppName, PriorityOrdered.class)) {
				priorityOrderedPostProcessors.add(beanFactory.getBean(ppName, BeanFactoryPostProcessor.class));
			}
			else if (beanFactory.isTypeMatch(ppName, Ordered.class)) {
				orderedPostProcessorNames.add(ppName);
			}
			else {
				nonOrderedPostProcessorNames.add(ppName);
			}
		}

		// First, invoke the BeanFactoryPostProcessors that implement PriorityOrdered.
		sortPostProcessors(beanFactory, priorityOrderedPostProcessors);
		invokeBeanFactoryPostProcessors(priorityOrderedPostProcessors, beanFactory);

		// Next, invoke the BeanFactoryPostProcessors that implement Ordered.
		List<BeanFactoryPostProcessor> orderedPostProcessors = new ArrayList<BeanFactoryPostProcessor>();
		for (String postProcessorName : orderedPostProcessorNames) {
			orderedPostProcessors.add(beanFactory.getBean(postProcessorName, BeanFactoryPostProcessor.class));
		}
		sortPostProcessors(beanFactory, orderedPostProcessors);
		invokeBeanFactoryPostProcessors(orderedPostProcessors, beanFactory);

		// Finally, invoke all other BeanFactoryPostProcessors.
		List<BeanFactoryPostProcessor> nonOrderedPostProcessors = new ArrayList<BeanFactoryPostProcessor>();
		for (String postProcessorName : nonOrderedPostProcessorNames) {
			nonOrderedPostProcessors.add(beanFactory.getBean(postProcessorName, BeanFactoryPostProcessor.class));
		}
		invokeBeanFactoryPostProcessors(nonOrderedPostProcessors, beanFactory);

		// Clear cached merged bean definitions since the post-processors might have
		// modified the original metadata, e.g. replacing placeholders in values...
		beanFactory.clearMetadataCache();
	}

仔细读里的逻辑会发现前半段是围绕：

			List<BeanFactoryPostProcessor> regularPostProcessors = new LinkedList<BeanFactoryPostProcessor>();
			List<BeanDefinitionRegistryPostProcessor> registryPostProcessors =
					new LinkedList<BeanDefinitionRegistryPostProcessor>();

这两个list进行不断筛选分类 然后进行invokeBeanDefinitionRegistryPostProcessors方法调用

而后半段是围绕：

		List<BeanFactoryPostProcessor> priorityOrderedPostProcessors = new ArrayList<BeanFactoryPostProcessor>();
		List<String> orderedPostProcessorNames = new ArrayList<String>();
		List<String> nonOrderedPostProcessorNames = new ArrayList<String>();

三个list进行分类添加进去，然后进行invokeBeanDefinitionRegistryPostProcessors方法调用

综上核心就是这个invokeBeanDefinitionRegistryPostProcessors的逻辑，我们来看看：

	private static void invokeBeanFactoryPostProcessors(
			Collection<? extends BeanFactoryPostProcessor> postProcessors, ConfigurableListableBeanFactory beanFactory) {

		for (BeanFactoryPostProcessor postProcessor : postProcessors) {
			postProcessor.postProcessBeanFactory(beanFactory);
		}
	}

遍历集合，并调用对应方法，继续查看源码：

	public void postProcessBeanFactory(ConfigurableListableBeanFactory beanFactory) {
		int factoryId = System.identityHashCode(beanFactory);
		if (this.factoriesPostProcessed.contains(factoryId)) {
			throw new IllegalStateException(
					"postProcessBeanFactory already called on this post-processor against " + beanFactory);
		}
		this.factoriesPostProcessed.add(factoryId);
		if (!this.registriesPostProcessed.contains(factoryId)) {
			// BeanDefinitionRegistryPostProcessor hook apparently not supported...
			// Simply call processConfigurationClasses lazily at this point then.
			processConfigBeanDefinitions((BeanDefinitionRegistry) beanFactory);
		}

		enhanceConfigurationClasses(beanFactory);
		beanFactory.addBeanPostProcessor(new ImportAwareBeanPostProcessor(beanFactory));
	}

设置注册id、然后这里显然主要逻辑在processConfigBeanDefinitions，继续查看：

	public void processConfigBeanDefinitions(BeanDefinitionRegistry registry) {
		List<BeanDefinitionHolder> configCandidates = new ArrayList<BeanDefinitionHolder>();
		String[] candidateNames = registry.getBeanDefinitionNames();

		for (String beanName : candidateNames) {
			BeanDefinition beanDef = registry.getBeanDefinition(beanName);
			if (ConfigurationClassUtils.isFullConfigurationClass(beanDef) ||
					ConfigurationClassUtils.isLiteConfigurationClass(beanDef)) {
				if (logger.isDebugEnabled()) {
					logger.debug("Bean definition has already been processed as a configuration class: " + beanDef);
				}
			}
			else if (ConfigurationClassUtils.checkConfigurationClassCandidate(beanDef, this.metadataReaderFactory)) {
				configCandidates.add(new BeanDefinitionHolder(beanDef, beanName));
			}
		}

		// Return immediately if no @Configuration classes were found
		if (configCandidates.isEmpty()) {
			return;
		}

		// Sort by previously determined @Order value, if applicable
		Collections.sort(configCandidates, new Comparator<BeanDefinitionHolder>() {
			@Override
			public int compare(BeanDefinitionHolder bd1, BeanDefinitionHolder bd2) {
				int i1 = ConfigurationClassUtils.getOrder(bd1.getBeanDefinition());
				int i2 = ConfigurationClassUtils.getOrder(bd2.getBeanDefinition());
				return (i1 < i2) ? -1 : (i1 > i2) ? 1 : 0;
			}
		});

		// Detect any custom bean name generation strategy supplied through the enclosing application context
		SingletonBeanRegistry sbr = null;
		if (registry instanceof SingletonBeanRegistry) {
			sbr = (SingletonBeanRegistry) registry;
			if (!this.localBeanNameGeneratorSet && sbr.containsSingleton(CONFIGURATION_BEAN_NAME_GENERATOR)) {
				BeanNameGenerator generator = (BeanNameGenerator) sbr.getSingleton(CONFIGURATION_BEAN_NAME_GENERATOR);
				this.componentScanBeanNameGenerator = generator;
				this.importBeanNameGenerator = generator;
			}
		}

		// Parse each @Configuration class
		ConfigurationClassParser parser = new ConfigurationClassParser(
				this.metadataReaderFactory, this.problemReporter, this.environment,
				this.resourceLoader, this.componentScanBeanNameGenerator, registry);

		Set<BeanDefinitionHolder> candidates = new LinkedHashSet<BeanDefinitionHolder>(configCandidates);
		Set<ConfigurationClass> alreadyParsed = new HashSet<ConfigurationClass>(configCandidates.size());
		do {
			parser.parse(candidates);
			parser.validate();

			Set<ConfigurationClass> configClasses = new LinkedHashSet<ConfigurationClass>(parser.getConfigurationClasses());
			configClasses.removeAll(alreadyParsed);

			// Read the model and create bean definitions based on its content
			if (this.reader == null) {
				this.reader = new ConfigurationClassBeanDefinitionReader(
						registry, this.sourceExtractor, this.resourceLoader, this.environment,
						this.importBeanNameGenerator, parser.getImportRegistry());
			}
			this.reader.loadBeanDefinitions(configClasses);
			alreadyParsed.addAll(configClasses);

			candidates.clear();
			if (registry.getBeanDefinitionCount() > candidateNames.length) {
				String[] newCandidateNames = registry.getBeanDefinitionNames();
				Set<String> oldCandidateNames = new HashSet<String>(Arrays.asList(candidateNames));
				Set<String> alreadyParsedClasses = new HashSet<String>();
				for (ConfigurationClass configurationClass : alreadyParsed) {
					alreadyParsedClasses.add(configurationClass.getMetadata().getClassName());
				}
				for (String candidateName : newCandidateNames) {
					if (!oldCandidateNames.contains(candidateName)) {
						BeanDefinition bd = registry.getBeanDefinition(candidateName);
						if (ConfigurationClassUtils.checkConfigurationClassCandidate(bd, this.metadataReaderFactory) &&
								!alreadyParsedClasses.contains(bd.getBeanClassName())) {
							candidates.add(new BeanDefinitionHolder(bd, candidateName));
						}
					}
				}
				candidateNames = newCandidateNames;
			}
		}
		while (!candidates.isEmpty());

		// Register the ImportRegistry as a bean in order to support ImportAware @Configuration classes
		if (sbr != null) {
			if (!sbr.containsSingleton(IMPORT_REGISTRY_BEAN_NAME)) {
				sbr.registerSingleton(IMPORT_REGISTRY_BEAN_NAME, parser.getImportRegistry());
			}
		}

		if (this.metadataReaderFactory instanceof CachingMetadataReaderFactory) {
			((CachingMetadataReaderFactory) this.metadataReaderFactory).clearCache();
		}
	}

比较长，分几部分看，第一部分刚开始是创建一个ArrayList，类型是BeanDefinitionHolder，我们看看这个：

public class BeanDefinitionHolder implements BeanMetadataElement {
    private final BeanDefinition beanDefinition;
    private final String beanName;
    private final String[] aliases;
    .......
}

可以看出，这个BeanDefinitionHolder实际上就是个BeanDefinition的一个小包装。

继续看，后面的代码就是从registry容器中拿bean名字出来然后又根据名字把BeanDefinition拿出来，最后把名字和BeanDefinition本身一起装到list里面去了，再排个序。后面又创建了两bean名字生成器。

现在可以看到重点了，有一行注释：

        // Parse each @Configuration class
		ConfigurationClassParser parser = new ConfigurationClassParser(
				this.metadataReaderFactory, this.problemReporter, this.environment,
				this.resourceLoader, this.componentScanBeanNameGenerator, registry);

		Set<BeanDefinitionHolder> candidates = new LinkedHashSet<BeanDefinitionHolder>(configCandidates);
		Set<ConfigurationClass> alreadyParsed = new HashSet<ConfigurationClass>(configCandidates.size());
		do {
			parser.parse(candidates);
			parser.validate();
            ......
        }while(....)
            .....

这里来到了核心重点，要解析我们的配置类了！弄了个do while循环保证这些都list里的东西都解析完，我们来看看解析方法parser.parse(candidates);吧！它是怎么解析的：

	public void parse(Set<BeanDefinitionHolder> configCandidates) {
		this.deferredImportSelectors = new LinkedList<DeferredImportSelectorHolder>();

		for (BeanDefinitionHolder holder : configCandidates) {
			BeanDefinition bd = holder.getBeanDefinition();
			try {
				if (bd instanceof AnnotatedBeanDefinition) {
					parse(((AnnotatedBeanDefinition) bd).getMetadata(), holder.getBeanName());
				}
				else if (bd instanceof AbstractBeanDefinition && ((AbstractBeanDefinition) bd).hasBeanClass()) {
					parse(((AbstractBeanDefinition) bd).getBeanClass(), holder.getBeanName());
				}
				else {
					parse(bd.getBeanClassName(), holder.getBeanName());
				}
			}
			catch (BeanDefinitionStoreException ex) {
				throw ex;
			}
			catch (Throwable ex) {
				throw new BeanDefinitionStoreException(
						"Failed to parse configuration class [" + bd.getBeanClassName() + "]", ex);
			}
		}

		processDeferredImportSelectors();
	}

这里又是分了三种情况去解析，第一种从名字可以看出来注解的那种解析，第二种是AbstractBeanDefinition这是对XML配置方式的解析，很明显我们看第一种，继续查看源码:

	protected final void parse(AnnotationMetadata metadata, String beanName) throws IOException {
		processConfigurationClass(new ConfigurationClass(metadata, beanName));
	}

继续查看：

	protected void processConfigurationClass(ConfigurationClass configClass) throws IOException {
		if (this.conditionEvaluator.shouldSkip(configClass.getMetadata(), ConfigurationPhase.PARSE_CONFIGURATION)) {
			return;
		}

		ConfigurationClass existingClass =this.configurationClasses.get(configClass);
		if (existingClass != null) {
			if (configClass.isImported()) {
				if (existingClass.isImported()) {
					existingClass.mergeImportedBy(configClass);
				}
				// Otherwise ignore new imported config class; existing non-imported class overrides it.
				return;
			}
			else {
				// Explicit bean definition found, probably replacing an import.
				// Let's remove the old one and go with the new one.
				this.configurationClasses.remove(configClass);
				for (Iterator<ConfigurationClass> it = this.knownSuperclasses.values().iterator(); it.hasNext();) {
					if (configClass.equals(it.next())) {
						it.remove();
					}
				}
			}
		}

		// Recursively process the configuration class and its superclass hierarchy.
		SourceClass sourceClass = asSourceClass(configClass);
		do {
			sourceClass = doProcessConfigurationClass(configClass, sourceClass);
		}
		while (sourceClass != null);

		this.configurationClasses.put(configClass, configClass);
	}

我们看Spring源码会发现，Spring源码里真正干活的都是doXXX方法，会发现这里终于也发现一个了，

前面是对配置类的一个判断处理，后面就是doProcessConfigurationClass真正处理了，处理完之后加入到configurationClasses中，也就是最后一句话。我们查看源码：

	protected final SourceClass doProcessConfigurationClass(ConfigurationClass configClass, SourceClass sourceClass)
			throws IOException {

		// Recursively process any member (nested) classes first
		processMemberClasses(configClass, sourceClass);

		// Process any @PropertySource annotations
		for (AnnotationAttributes propertySource : AnnotationConfigUtils.attributesForRepeatable(
				sourceClass.getMetadata(), PropertySources.class,
				org.springframework.context.annotation.PropertySource.class)) {
			if (this.environment instanceof ConfigurableEnvironment) {
				processPropertySource(propertySource);
			}
			else {
				logger.warn("Ignoring @PropertySource annotation on [" + sourceClass.getMetadata().getClassName() +
						"]. Reason: Environment must implement ConfigurableEnvironment");
			}
		}

		// Process any @ComponentScan annotations
		Set<AnnotationAttributes> componentScans = AnnotationConfigUtils.attributesForRepeatable(
				sourceClass.getMetadata(), ComponentScans.class, ComponentScan.class);
		if (!componentScans.isEmpty() &&
				!this.conditionEvaluator.shouldSkip(sourceClass.getMetadata(), ConfigurationPhase.REGISTER_BEAN)) {
			for (AnnotationAttributes componentScan : componentScans) {
				// The config class is annotated with @ComponentScan -> perform the scan immediately
				Set<BeanDefinitionHolder> scannedBeanDefinitions =
						this.componentScanParser.parse(componentScan, sourceClass.getMetadata().getClassName());
				// Check the set of scanned definitions for any further config classes and parse recursively if needed
				for (BeanDefinitionHolder holder : scannedBeanDefinitions) {
					if (ConfigurationClassUtils.checkConfigurationClassCandidate(
							holder.getBeanDefinition(), this.metadataReaderFactory)) {
						parse(holder.getBeanDefinition().getBeanClassName(), holder.getBeanName());
					}
				}
			}
		}

		// Process any @Import annotations
		processImports(configClass, sourceClass, getImports(sourceClass), true);

		// Process any @ImportResource annotations
		if (sourceClass.getMetadata().isAnnotated(ImportResource.class.getName())) {
			AnnotationAttributes importResource =
					AnnotationConfigUtils.attributesFor(sourceClass.getMetadata(), ImportResource.class);
			String[] resources = importResource.getStringArray("locations");
			Class<? extends BeanDefinitionReader> readerClass = importResource.getClass("reader");
			for (String resource : resources) {
				String resolvedResource = this.environment.resolveRequiredPlaceholders(resource);
				configClass.addImportedResource(resolvedResource, readerClass);
			}
		}

		// Process individual @Bean methods
		Set<MethodMetadata> beanMethods = retrieveBeanMethodMetadata(sourceClass);
		for (MethodMetadata methodMetadata : beanMethods) {
			configClass.addBeanMethod(new BeanMethod(methodMetadata, configClass));
		}

		// Process default methods on interfaces
		processInterfaces(configClass, sourceClass);

		// Process superclass, if any
		if (sourceClass.getMetadata().hasSuperClass()) {
			String superclass = sourceClass.getMetadata().getSuperClassName();
			if (!superclass.startsWith("java") && !this.knownSuperclasses.containsKey(superclass)) {
				this.knownSuperclasses.put(superclass, configClass);
				// Superclass found, return its annotation metadata and recurse
				return sourceClass.getSuperClass();
			}
		}

		// No superclass -> processing is complete
		return null;
	}

到了这里有种终见神龙真身的感觉。。。终于开始对我们常用的那些注解分别进行解析了。。我们可以挑几个最常用的看看，来看看非常常用的@ComponentScan注解吧！

IOC三大常用springbean配置用法，还有个是通过@ComponentScan配置的，SpringBoot也是通过这种。

@Target({ElementType.TYPE})
@Retention(RetentionPolicy.RUNTIME)
@Documented
@Inherited
@SpringBootConfiguration
@EnableAutoConfiguration
@ComponentScan(
    excludeFilters = {@Filter(
    type = FilterType.CUSTOM,
    classes = {TypeExcludeFilter.class}
), @Filter(
    type = FilterType.CUSTOM,
    classes = {AutoConfigurationExcludeFilter.class}
)}
)
public @interface SpringBootApplication {
		....
}

@ComponentScan源码

		// Process any @ComponentScan annotations
		Set<AnnotationAttributes> componentScans = AnnotationConfigUtils.attributesForRepeatable(
				sourceClass.getMetadata(), ComponentScans.class, ComponentScan.class);
		if (!componentScans.isEmpty() &&
				!this.conditionEvaluator.shouldSkip(sourceClass.getMetadata(), ConfigurationPhase.REGISTER_BEAN)) {
			for (AnnotationAttributes componentScan : componentScans) {
				// The config class is annotated with @ComponentScan -> perform the scan immediately
				Set<BeanDefinitionHolder> scannedBeanDefinitions =
						this.componentScanParser.parse(componentScan, sourceClass.getMetadata().getClassName());
				// Check the set of scanned definitions for any further config classes and parse recursively if needed
				for (BeanDefinitionHolder holder : scannedBeanDefinitions) {
					if (ConfigurationClassUtils.checkConfigurationClassCandidate(
							holder.getBeanDefinition(), this.metadataReaderFactory)) {
						parse(holder.getBeanDefinition().getBeanClassName(), holder.getBeanName());
					}
				}
			}
		}

这里的第一句

		Set<AnnotationAttributes> componentScans = AnnotationConfigUtils.attributesForRepeatable(
				sourceClass.getMetadata(), ComponentScans.class, ComponentScan.class);

是把我们的配置类也就是sourceClass，获取了元数据传到这个注解工具类里去了，是把配置类里面的@ComponentScan注解解析为对象了，这样方便后面拿到注解里设置的值。

然后往后看

Set<BeanDefinitionHolder> scannedBeanDefinitions =
						this.componentScanParser.parse(componentScan, 		   sourceClass.getMetadata().getClassName());

就是继续解析了，查看源码：

	public Set<BeanDefinitionHolder> parse(AnnotationAttributes componentScan, final String declaringClass) {
		Assert.state(this.environment != null, "Environment must not be null");
		Assert.state(this.resourceLoader != null, "ResourceLoader must not be null");

		ClassPathBeanDefinitionScanner scanner = new ClassPathBeanDefinitionScanner(this.registry,
				componentScan.getBoolean("useDefaultFilters"), this.environment, this.resourceLoader);

		Class<? extends BeanNameGenerator> generatorClass = componentScan.getClass("nameGenerator");
		boolean useInheritedGenerator = (BeanNameGenerator.class == generatorClass);
		scanner.setBeanNameGenerator(useInheritedGenerator ? this.beanNameGenerator :
				BeanUtils.instantiateClass(generatorClass));

		ScopedProxyMode scopedProxyMode = componentScan.getEnum("scopedProxy");
		if (scopedProxyMode != ScopedProxyMode.DEFAULT) {
			scanner.setScopedProxyMode(scopedProxyMode);
		}
		else {
			Class<? extends ScopeMetadataResolver> resolverClass = componentScan.getClass("scopeResolver");
			scanner.setScopeMetadataResolver(BeanUtils.instantiateClass(resolverClass));
		}

		scanner.setResourcePattern(componentScan.getString("resourcePattern"));

		for (AnnotationAttributes filter : componentScan.getAnnotationArray("includeFilters")) {
			for (TypeFilter typeFilter : typeFiltersFor(filter)) {
				scanner.addIncludeFilter(typeFilter);
			}
		}
		for (AnnotationAttributes filter : componentScan.getAnnotationArray("excludeFilters")) {
			for (TypeFilter typeFilter : typeFiltersFor(filter)) {
				scanner.addExcludeFilter(typeFilter);
			}
		}

		boolean lazyInit = componentScan.getBoolean("lazyInit");
		if (lazyInit) {
			scanner.getBeanDefinitionDefaults().setLazyInit(true);
		}

		Set<String> basePackages = new LinkedHashSet<String>();
		String[] basePackagesArray = componentScan.getStringArray("basePackages");
		for (String pkg : basePackagesArray) {
			String[] tokenized = StringUtils.tokenizeToStringArray(this.environment.resolvePlaceholders(pkg),
					ConfigurableApplicationContext.CONFIG_LOCATION_DELIMITERS);
			basePackages.addAll(Arrays.asList(tokenized));
		}
		for (Class<?> clazz : componentScan.getClassArray("basePackageClasses")) {
			basePackages.add(ClassUtils.getPackageName(clazz));
		}
		if (basePackages.isEmpty()) {
			basePackages.add(ClassUtils.getPackageName(declaringClass));
		}

		scanner.addExcludeFilter(new AbstractTypeHierarchyTraversingFilter(false, false) {
			@Override
			protected boolean matchClassName(String className) {
				return declaringClass.equals(className);
			}
		});
		return scanner.doScan(StringUtils.toStringArray(basePackages));
	}

又是一堆代码...总体看下来会发现，前面95%都是给下面这句话设置参数：

ClassPathBeanDefinitionScanner scanner = new ClassPathBeanDefinitionScanner(this.registry,componentScan.getBoolean("useDefaultFilters"), this.environment, this.resourceLoader);

很明显ClassPathBeanDefinitionScanner是真正用来扫描类的，类注释写了“A bean definition scanner that detects bean candidates on the classpath”，后面都是给扫描器设置各种名字生成器、scope、resourcePattern、以及include和exclude和是否懒加载，直到下面这段时候才开始注意路径：

		Set<String> basePackages = new LinkedHashSet<String>();
		String[] basePackagesArray = componentScan.getStringArray("basePackages");
		for (String pkg : basePackagesArray) {
			String[] tokenized = StringUtils.tokenizeToStringArray(this.environment.resolvePlaceholders(pkg),
					ConfigurableApplicationContext.CONFIG_LOCATION_DELIMITERS);
			basePackages.addAll(Arrays.asList(tokenized));
		}
		for (Class<?> clazz : componentScan.getClassArray("basePackageClasses")) {
			basePackages.add(ClassUtils.getPackageName(clazz));
		}
		if (basePackages.isEmpty()) {
			basePackages.add(ClassUtils.getPackageName(declaringClass));
		}

获取我们在注解里写的basePackages，进行环境路径设置，最后加到之前创建的hashset类型的basePackages变量里去。然后设置排除filter到扫描器。最后一句又到了核心代码了。

		return scanner.doScan(StringUtils.toStringArray(basePackages));

这里就是最后真正扫描了，查看源码：

	protected Set<BeanDefinitionHolder> doScan(String... basePackages) {
		Assert.notEmpty(basePackages, "At least one base package must be specified");
		Set<BeanDefinitionHolder> beanDefinitions = new LinkedHashSet<BeanDefinitionHolder>();
		for (String basePackage : basePackages) {
			Set<BeanDefinition> candidates = findCandidateComponents(basePackage);
			for (BeanDefinition candidate : candidates) {
				ScopeMetadata scopeMetadata = this.scopeMetadataResolver.resolveScopeMetadata(candidate);
				candidate.setScope(scopeMetadata.getScopeName());
				String beanName = this.beanNameGenerator.generateBeanName(candidate, this.registry);
				if (candidate instanceof AbstractBeanDefinition) {
					postProcessBeanDefinition((AbstractBeanDefinition) candidate, beanName);
				}
				if (candidate instanceof AnnotatedBeanDefinition) {
					AnnotationConfigUtils.processCommonDefinitionAnnotations((AnnotatedBeanDefinition) candidate);
				}
				if (checkCandidate(beanName, candidate)) {
					BeanDefinitionHolder definitionHolder = new BeanDefinitionHolder(candidate, beanName);
					definitionHolder =
							AnnotationConfigUtils.applyScopedProxyMode(scopeMetadata, definitionHolder, this.registry);
					beanDefinitions.add(definitionHolder);
					registerBeanDefinition(definitionHolder, this.registry);
				}
			}
		}
		return beanDefinitions;
	}

for循环遍历basePackages，再通过findCandidateComponents方法拿到每个basePageage下的类BeanDefinition们，后面就是给每个BeanDefinition进行配置。

那我们就先来看看findCandidateComponents方法源码是怎么把这些BeanDefinition搞出来的：

	public Set<BeanDefinition> findCandidateComponents(String basePackage) {
		Set<BeanDefinition> candidates = new LinkedHashSet<BeanDefinition>();
		try {
			String packageSearchPath = ResourcePatternResolver.CLASSPATH_ALL_URL_PREFIX +
					resolveBasePackage(basePackage) + '/' + this.resourcePattern;
			Resource[] resources = this.resourcePatternResolver.getResources(packageSearchPath);
			boolean traceEnabled = logger.isTraceEnabled();
			boolean debugEnabled = logger.isDebugEnabled();
			for (Resource resource : resources) {
				if (traceEnabled) {
					logger.trace("Scanning " + resource);
				}
				if (resource.isReadable()) {
					try {
						MetadataReader metadataReader = this.metadataReaderFactory.getMetadataReader(resource);
						if (isCandidateComponent(metadataReader)) {
							ScannedGenericBeanDefinition sbd = new ScannedGenericBeanDefinition(metadataReader);
							sbd.setResource(resource);
							sbd.setSource(resource);
							if (isCandidateComponent(sbd)) {
								if (debugEnabled) {
									logger.debug("Identified candidate component class: " + resource);
								}
								candidates.add(sbd);
							}
							else {
								if (debugEnabled) {
									logger.debug("Ignored because not a concrete top-level class: " + resource);
								}
							}
						}
						else {
							if (traceEnabled) {
								logger.trace("Ignored because not matching any filter: " + resource);
							}
						}
					}
					catch (Throwable ex) {
						throw new BeanDefinitionStoreException(
								"Failed to read candidate component class: " + resource, ex);
					}
				}
				else {
					if (traceEnabled) {
						logger.trace("Ignored because not readable: " + resource);
					}
				}
			}
		}
		catch (IOException ex) {
			throw new BeanDefinitionStoreException("I/O failure during classpath scanning", ex);
		}
		return candidates;
	}

这里的办法就比较好懂了，可能有些自己平时都写过。第一个明显拼字符串，拼最终要读取的资源文件路径，然后把文件路径交给resourcePatternResolver，获取一个Resource类（继承自InputStreamSource），这个就是个IO流读取。

这里大段都是try catch了，因为涉及到很多失败的情况，都做了处理。

里面主要还做了filter的判断，判断是不是你是不是exclude了一些 这样就不读了，然后读出来是不是打了Component注解的，最后条件都满足的话就把读出来的信息就加到 最终的一个LinkedHashSet的集合里去了，进行返回。

全读出来之后，返回上层doScan方法的这里：

Set<BeanDefinition> candidates = findCandidateComponents(basePackage);
			for (BeanDefinition candidate : candidates) {
				ScopeMetadata scopeMetadata = this.scopeMetadataResolver.resolveScopeMetadata(candidate);
				candidate.setScope(scopeMetadata.getScopeName());
				String beanName = this.beanNameGenerator.generateBeanName(candidate, this.registry);
				if (candidate instanceof AbstractBeanDefinition) {
					postProcessBeanDefinition((AbstractBeanDefinition) candidate, beanName);
				}
				if (candidate instanceof AnnotatedBeanDefinition) {
					AnnotationConfigUtils.processCommonDefinitionAnnotations((AnnotatedBeanDefinition) candidate);
				}
				if (checkCandidate(beanName, candidate)) {
					BeanDefinitionHolder definitionHolder = new BeanDefinitionHolder(candidate, beanName);
					definitionHolder =
							AnnotationConfigUtils.applyScopedProxyMode(scopeMetadata, definitionHolder, this.registry);
					beanDefinitions.add(definitionHolder);
					registerBeanDefinition(definitionHolder, this.registry);
				}
			}

给扫描出来的BeanDefinition设置scope，单例多例、搞一个名字给这个BeanDefinition，以及判断是注解形式配置的还是XML形式配置的给它设置一些默认的配置，比如默认的懒加载设置各种，spring有默认的或者读你设置的。最后把这个BeanDefinition和名字一起包装成BeanDefinitionHolder，通过：

BeanDefinitionHolder definitionHolder = new BeanDefinitionHolder(candidate, beanName);
definitionHolder=AnnotationConfigUtils.applyScopedProxyMode(scopeMetadata,definitionHolder, this.registry);
beanDefinitions.add(definitionHolder);
registerBeanDefinition(definitionHolder, this.registry);

最后registerBeanDefinition注册到容器里去。说实话我又好奇是咋注册的，不断打开源码：

public void registerBeanDefinition(String beanName, BeanDefinition beanDefinition)
			throws BeanDefinitionStoreException {

		Assert.hasText(beanName, "Bean name must not be empty");
		Assert.notNull(beanDefinition, "BeanDefinition must not be null");

		if (beanDefinition instanceof AbstractBeanDefinition) {
			try {
				((AbstractBeanDefinition) beanDefinition).validate();
			}
			catch (BeanDefinitionValidationException ex) {
				throw new BeanDefinitionStoreException(beanDefinition.getResourceDescription(), beanName,
						"Validation of bean definition failed", ex);
			}
		}

		BeanDefinition oldBeanDefinition;

		oldBeanDefinition = this.beanDefinitionMap.get(beanName);
		if (oldBeanDefinition != null) {
			if (!isAllowBeanDefinitionOverriding()) {
				throw new BeanDefinitionStoreException(beanDefinition.getResourceDescription(), beanName,
						"Cannot register bean definition [" + beanDefinition + "] for bean '" + beanName +
						"': There is already [" + oldBeanDefinition + "] bound.");
			}
			else if (oldBeanDefinition.getRole() < beanDefinition.getRole()) {
				// e.g. was ROLE_APPLICATION, now overriding with ROLE_SUPPORT or ROLE_INFRASTRUCTURE
				if (this.logger.isWarnEnabled()) {
					this.logger.warn("Overriding user-defined bean definition for bean '" + beanName +
							"' with a framework-generated bean definition: replacing [" +
							oldBeanDefinition + "] with [" + beanDefinition + "]");
				}
			}
			else if (!beanDefinition.equals(oldBeanDefinition)) {
				if (this.logger.isInfoEnabled()) {
					this.logger.info("Overriding bean definition for bean '" + beanName +
							"' with a different definition: replacing [" + oldBeanDefinition +
							"] with [" + beanDefinition + "]");
				}
			}
			else {
				if (this.logger.isDebugEnabled()) {
					this.logger.debug("Overriding bean definition for bean '" + beanName +
							"' with an equivalent definition: replacing [" + oldBeanDefinition +
							"] with [" + beanDefinition + "]");
				}
			}
			this.beanDefinitionMap.put(beanName, beanDefinition);
		}
		else {
			if (hasBeanCreationStarted()) {
				// Cannot modify startup-time collection elements anymore (for stable iteration)
				synchronized (this.beanDefinitionMap) {
					this.beanDefinitionMap.put(beanName, beanDefinition);
					List<String> updatedDefinitions = new ArrayList<String>(this.beanDefinitionNames.size() + 1);
					updatedDefinitions.addAll(this.beanDefinitionNames);
					updatedDefinitions.add(beanName);
					this.beanDefinitionNames = updatedDefinitions;
					if (this.manualSingletonNames.contains(beanName)) {
						Set<String> updatedSingletons = new LinkedHashSet<String>(this.manualSingletonNames);
						updatedSingletons.remove(beanName);
						this.manualSingletonNames = updatedSingletons;
					}
				}
			}
			else {
				// Still in startup registration phase
				this.beanDefinitionMap.put(beanName, beanDefinition);
				this.beanDefinitionNames.add(beanName);
				this.manualSingletonNames.remove(beanName);
			}
			this.frozenBeanDefinitionNames = null;
		}

		if (oldBeanDefinition != null || containsSingleton(beanName)) {
			resetBeanDefinition(beanName);
		}
	}

啰嗦了很长一大段，其实是一些校验、对同名BeanDefinition的处理啥的，核心就一句：

this.beanDefinitionMap.put(beanName, beanDefinition);

查看这个beanDefinitionMap

private final Map<String, BeanDefinition> beanDefinitionMap = new ConcurrentHashMap<String, BeanDefinition>(256);

就是个ConcurrentHashMap，在DefaultListableBeanFactory类里的一个private私有成员变量，所以也可见DefaultListableBeanFactory类的重要性，BeanDefinition都存在它这了，容器。

ok，一探到底了，开始回到上层调用吧。

回到之前的ConfigurationClassParser类的doProcessConfigurationClass方法中，是这个方法里开始的各种注解的解析：

		// Process any @ComponentScan annotations
		Set<AnnotationAttributes> componentScans = AnnotationConfigUtils.attributesForRepeatable(
				sourceClass.getMetadata(), ComponentScans.class, ComponentScan.class);
		if (!componentScans.isEmpty() &&
				!this.conditionEvaluator.shouldSkip(sourceClass.getMetadata(), ConfigurationPhase.REGISTER_BEAN)) {
			for (AnnotationAttributes componentScan : componentScans) {
				// The config class is annotated with @ComponentScan -> perform the scan immediately
				Set<BeanDefinitionHolder> scannedBeanDefinitions =
						this.componentScanParser.parse(componentScan, sourceClass.getMetadata().getClassName());
				// Check the set of scanned definitions for any further config classes and parse recursively if needed
				for (BeanDefinitionHolder holder : scannedBeanDefinitions) {
					if (ConfigurationClassUtils.checkConfigurationClassCandidate(
							holder.getBeanDefinition(), this.metadataReaderFactory)) {
						parse(holder.getBeanDefinition().getBeanClassName(), holder.getBeanName());
					}
				}
			}
		}

我们之前是对这里的：

Set<BeanDefinitionHolder> scannedBeanDefinitions =
						this.componentScanParser.parse(componentScan, sourceClass.getMetadata().getClassName());

进行的不断深挖，那就往下看吧:

for (BeanDefinitionHolder holder : scannedBeanDefinitions) {
	if (ConfigurationClassUtils.checkConfigurationClassCandidate(
		holder.getBeanDefinition(), this.metadataReaderFactory)) {
		parse(holder.getBeanDefinition().getBeanClassName(), holder.getBeanName());
	}
}

这里是检查ComponentScan扫出来的类是不是又打了ComonentScan注解，可能就需要递归解析了。

OK，那我们就把@ComponentScan相关源码分析完了。

这个方法里还有别的注解的解析。比如我们这个系列最开始给的例子：通过Java配置类配置bean 就是用的@Bean注解。那我们来看看@Bean注解。

@Bean源码

// Process individual @Bean methods
Set<MethodMetadata> beanMethods = retrieveBeanMethodMetadata(sourceClass);
for (MethodMetadata methodMetadata : beanMethods) {
	configClass.addBeanMethod(new BeanMethod(methodMetadata, configClass));
}

这里面这个addBeanMethod方法打开一看：

	public void addBeanMethod(BeanMethod method) {
		this.beanMethods.add(method);
	}

而beanMehtods是个private final Set beanMethods = new LinkedHashSet();

感觉是啥也没干，就是加进去了而已。只能看看retrieveBeanMethodMetadata是在干嘛了，打开：

	private Set<MethodMetadata> retrieveBeanMethodMetadata(SourceClass sourceClass) {
		AnnotationMetadata original = sourceClass.getMetadata();
		Set<MethodMetadata> beanMethods = original.getAnnotatedMethods(Bean.class.getName());
		if (beanMethods.size() > 1 && original instanceof StandardAnnotationMetadata) {
			// Try reading the class file via ASM for deterministic declaration order...
			// Unfortunately, the JVM's standard reflection returns methods in arbitrary
			// order, even between different runs of the same application on the same JVM.
			try {
				AnnotationMetadata asm =
						this.metadataReaderFactory.getMetadataReader(original.getClassName()).getAnnotationMetadata();
				Set<MethodMetadata> asmMethods = asm.getAnnotatedMethods(Bean.class.getName());
				if (asmMethods.size() >= beanMethods.size()) {
					Set<MethodMetadata> selectedMethods = new LinkedHashSet<MethodMetadata>(asmMethods.size());
					for (MethodMetadata asmMethod : asmMethods) {
						for (MethodMetadata beanMethod : beanMethods) {
							if (beanMethod.getMethodName().equals(asmMethod.getMethodName())) {
								selectedMethods.add(beanMethod);
								break;
							}
						}
					}
					if (selectedMethods.size() == beanMethods.size()) {
						// All reflection-detected methods found in ASM method set -> proceed
						beanMethods = selectedMethods;
					}
				}
			}
			catch (IOException ex) {
				logger.debug("Failed to read class file via ASM for determining @Bean method order", ex);
				// No worries, let's continue with the reflection metadata we started with...
			}
		}
		return beanMethods;
	}

这里貌似也没干啥，就是把配置类里面的打了bean注解的方法返回拿出来了，啥也没干。那么这个@Bean注解标注里的创建对象到底在哪里创建并加到容器呢？

这里明显就是个预操作，那么真正的操作在上层调用后面（实际上这个parse解析方法里也就只有@ComponentScan的真正处理了），我们返回上层直到有parse方法的地方：来到ConfigurationClassPostProcessor的processConfigBeanDefinitions方法:

public void processConfigBeanDefinitions(BeanDefinitionRegistry registry) {
		List<BeanDefinitionHolder> configCandidates = new ArrayList<BeanDefinitionHolder>();
		String[] candidateNames = registry.getBeanDefinitionNames();

		for (String beanName : candidateNames) {
			BeanDefinition beanDef = registry.getBeanDefinition(beanName);
			if (ConfigurationClassUtils.isFullConfigurationClass(beanDef) ||
					ConfigurationClassUtils.isLiteConfigurationClass(beanDef)) {
				if (logger.isDebugEnabled()) {
					logger.debug("Bean definition has already been processed as a configuration class: " + beanDef);
				}
			}
			else if (ConfigurationClassUtils.checkConfigurationClassCandidate(beanDef, this.metadataReaderFactory)) {
				configCandidates.add(new BeanDefinitionHolder(beanDef, beanName));
			}
		}

		// Return immediately if no @Configuration classes were found
		if (configCandidates.isEmpty()) {
			return;
		}

		// Sort by previously determined @Order value, if applicable
		Collections.sort(configCandidates, new Comparator<BeanDefinitionHolder>() {
			@Override
			public int compare(BeanDefinitionHolder bd1, BeanDefinitionHolder bd2) {
				int i1 = ConfigurationClassUtils.getOrder(bd1.getBeanDefinition());
				int i2 = ConfigurationClassUtils.getOrder(bd2.getBeanDefinition());
				return (i1 < i2) ? -1 : (i1 > i2) ? 1 : 0;
			}
		});

		// Detect any custom bean name generation strategy supplied through the enclosing application context
		SingletonBeanRegistry sbr = null;
		if (registry instanceof SingletonBeanRegistry) {
			sbr = (SingletonBeanRegistry) registry;
			if (!this.localBeanNameGeneratorSet && sbr.containsSingleton(CONFIGURATION_BEAN_NAME_GENERATOR)) {
				BeanNameGenerator generator = (BeanNameGenerator) sbr.getSingleton(CONFIGURATION_BEAN_NAME_GENERATOR);
				this.componentScanBeanNameGenerator = generator;
				this.importBeanNameGenerator = generator;
			}
		}

		// Parse each @Configuration class
		ConfigurationClassParser parser = new ConfigurationClassParser(
				this.metadataReaderFactory, this.problemReporter, this.environment,
				this.resourceLoader, this.componentScanBeanNameGenerator, registry);

		Set<BeanDefinitionHolder> candidates = new LinkedHashSet<BeanDefinitionHolder>(configCandidates);
		Set<ConfigurationClass> alreadyParsed = new HashSet<ConfigurationClass>(configCandidates.size());
		do {
			parser.parse(candidates);
			parser.validate();

			Set<ConfigurationClass> configClasses = new LinkedHashSet<ConfigurationClass>(parser.getConfigurationClasses());
			configClasses.removeAll(alreadyParsed);

			// Read the model and create bean definitions based on its content
			if (this.reader == null) {
				this.reader = new ConfigurationClassBeanDefinitionReader(
						registry, this.sourceExtractor, this.resourceLoader, this.environment,
						this.importBeanNameGenerator, parser.getImportRegistry());
			}
			this.reader.loadBeanDefinitions(configClasses);
			alreadyParsed.addAll(configClasses);

			candidates.clear();
			if (registry.getBeanDefinitionCount() > candidateNames.length) {
				String[] newCandidateNames = registry.getBeanDefinitionNames();
				Set<String> oldCandidateNames = new HashSet<String>(Arrays.asList(candidateNames));
				Set<String> alreadyParsedClasses = new HashSet<String>();
				for (ConfigurationClass configurationClass : alreadyParsed) {
					alreadyParsedClasses.add(configurationClass.getMetadata().getClassName());
				}
				for (String candidateName : newCandidateNames) {
					if (!oldCandidateNames.contains(candidateName)) {
						BeanDefinition bd = registry.getBeanDefinition(candidateName);
						if (ConfigurationClassUtils.checkConfigurationClassCandidate(bd, this.metadataReaderFactory) &&
								!alreadyParsedClasses.contains(bd.getBeanClassName())) {
							candidates.add(new BeanDefinitionHolder(bd, candidateName));
						}
					}
				}
				candidateNames = newCandidateNames;
			}
		}
		while (!candidates.isEmpty());

		// Register the ImportRegistry as a bean in order to support ImportAware @Configuration classes
		if (sbr != null) {
			if (!sbr.containsSingleton(IMPORT_REGISTRY_BEAN_NAME)) {
				sbr.registerSingleton(IMPORT_REGISTRY_BEAN_NAME, parser.getImportRegistry());
			}
		}

		if (this.metadataReaderFactory instanceof CachingMetadataReaderFactory) {
			((CachingMetadataReaderFactory) this.metadataReaderFactory).clearCache();
		}
	}

我们只看我们之前查看源代码的parse方法那附近和后面就行了，有个do while循环解析那：

do {
			parser.parse(candidates);
			parser.validate();

			Set<ConfigurationClass> configClasses = new LinkedHashSet<ConfigurationClass>(parser.getConfigurationClasses());
			configClasses.removeAll(alreadyParsed);

			// Read the model and create bean definitions based on its content
			if (this.reader == null) {
				this.reader = new ConfigurationClassBeanDefinitionReader(
						registry, this.sourceExtractor, this.resourceLoader, this.environment,
						this.importBeanNameGenerator, parser.getImportRegistry());
			}
			this.reader.loadBeanDefinitions(configClasses);
			alreadyParsed.addAll(configClasses);

			candidates.clear();
			if (registry.getBeanDefinitionCount() > candidateNames.length) {
				String[] newCandidateNames = registry.getBeanDefinitionNames();
				Set<String> oldCandidateNames = new HashSet<String>(Arrays.asList(candidateNames));
				Set<String> alreadyParsedClasses = new HashSet<String>();
				for (ConfigurationClass configurationClass : alreadyParsed) {
					alreadyParsedClasses.add(configurationClass.getMetadata().getClassName());
				}
				for (String candidateName : newCandidateNames) {
					if (!oldCandidateNames.contains(candidateName)) {
						BeanDefinition bd = registry.getBeanDefinition(candidateName);
						if (ConfigurationClassUtils.checkConfigurationClassCandidate(bd, this.metadataReaderFactory) &&
								!alreadyParsedClasses.contains(bd.getBeanClassName())) {
							candidates.add(new BeanDefinitionHolder(bd, candidateName));
						}
					}
				}
				candidateNames = newCandidateNames;
			}
		}
		while (!candidates.isEmpty());

parser.parse(candidates);后面是校验和创建配置类的Set。注意到有一个方法：

this.reader.loadBeanDefinitions(configClasses);

这个操作reader的loadBeanDefinitions比较贴近意思了，点进去看看：

	/**
	 * 读取 {@code configurationModel}, 根据其内容在registry中注册bean定义.
	 */
	public void loadBeanDefinitions(Set<ConfigurationClass> configurationModel) {
		TrackedConditionEvaluator trackedConditionEvaluator = new TrackedConditionEvaluator();
		for (ConfigurationClass configClass : configurationModel) {
			loadBeanDefinitionsForConfigurationClass(configClass, trackedConditionEvaluator);
		}
	}

这个注释提示得非常明显，继续跟进loadBeanDefinitionsForConfigurationClass：

	/**
	 * Read a particular {@link ConfigurationClass}, registering bean definitions
	 * for the class itself and all of its {@link Bean} methods.
	 */
	private void loadBeanDefinitionsForConfigurationClass(ConfigurationClass configClass,
			TrackedConditionEvaluator trackedConditionEvaluator) {

		if (trackedConditionEvaluator.shouldSkip(configClass)) {
			String beanName = configClass.getBeanName();
			if (StringUtils.hasLength(beanName) && this.registry.containsBeanDefinition(beanName)) {
				this.registry.removeBeanDefinition(beanName);
			}
			this.importRegistry.removeImportingClass(configClass.getMetadata().getClassName());
			return;
		}

		if (configClass.isImported()) {
			registerBeanDefinitionForImportedConfigurationClass(configClass);
		}
		for (BeanMethod beanMethod : configClass.getBeanMethods()) {
			loadBeanDefinitionsForBeanMethod(beanMethod);
		}
		loadBeanDefinitionsFromImportedResources(configClass.getImportedResources());
		loadBeanDefinitionsFromRegistrars(configClass.getImportBeanDefinitionRegistrars());
	}

注意到里面有个重点啊：

		for (BeanMethod beanMethod : configClass.getBeanMethods()) {
			loadBeanDefinitionsForBeanMethod(beanMethod);
		}

这也太明显了哈，把配置的bean方法拿出来，一个个去加载，继续跟进：

	/**
	 * Read the given {@link BeanMethod}, registering bean definitions
	 * with the BeanDefinitionRegistry based on its contents.
	 */
	private void loadBeanDefinitionsForBeanMethod(BeanMethod beanMethod) {
		ConfigurationClass configClass = beanMethod.getConfigurationClass();
		MethodMetadata metadata = beanMethod.getMetadata();
		String methodName = metadata.getMethodName();

		// Do we need to mark the bean as skipped by its condition?
		if (this.conditionEvaluator.shouldSkip(metadata, ConfigurationPhase.REGISTER_BEAN)) {
			configClass.skippedBeanMethods.add(methodName);
			return;
		}
		if (configClass.skippedBeanMethods.contains(methodName)) {
			return;
		}

		// Consider name and any aliases
		AnnotationAttributes bean = AnnotationConfigUtils.attributesFor(metadata, Bean.class);
		List<String> names = new ArrayList<String>(Arrays.asList(bean.getStringArray("name")));
		String beanName = (!names.isEmpty() ? names.remove(0) : methodName);

		// Register aliases even when overridden
		for (String alias : names) {
			this.registry.registerAlias(beanName, alias);
		}

		// Has this effectively been overridden before (e.g. via XML)?
		if (isOverriddenByExistingDefinition(beanMethod, beanName)) {
			return;
		}

		ConfigurationClassBeanDefinition beanDef = new ConfigurationClassBeanDefinition(configClass, metadata);
		beanDef.setResource(configClass.getResource());
		beanDef.setSource(this.sourceExtractor.extractSource(metadata, configClass.getResource()));

		if (metadata.isStatic()) {
			// static @Bean method
			beanDef.setBeanClassName(configClass.getMetadata().getClassName());
			beanDef.setFactoryMethodName(methodName);
		}
		else {
			// instance @Bean method
			beanDef.setFactoryBeanName(configClass.getBeanName());
			beanDef.setUniqueFactoryMethodName(methodName);
		}
		beanDef.setAutowireMode(RootBeanDefinition.AUTOWIRE_CONSTRUCTOR);
		beanDef.setAttribute(RequiredAnnotationBeanPostProcessor.SKIP_REQUIRED_CHECK_ATTRIBUTE, Boolean.TRUE);

		AnnotationConfigUtils.processCommonDefinitionAnnotations(beanDef, metadata);

		Autowire autowire = bean.getEnum("autowire");
		if (autowire.isAutowire()) {
			beanDef.setAutowireMode(autowire.value());
		}

		String initMethodName = bean.getString("initMethod");
		if (StringUtils.hasText(initMethodName)) {
			beanDef.setInitMethodName(initMethodName);
		}

		String destroyMethodName = bean.getString("destroyMethod");
		if (destroyMethodName != null) {
			beanDef.setDestroyMethodName(destroyMethodName);
		}

		// Consider scoping
		ScopedProxyMode proxyMode = ScopedProxyMode.NO;
		AnnotationAttributes attributes = AnnotationConfigUtils.attributesFor(metadata, Scope.class);
		if (attributes != null) {
			beanDef.setScope(attributes.getString("value"));
			proxyMode = attributes.getEnum("proxyMode");
			if (proxyMode == ScopedProxyMode.DEFAULT) {
				proxyMode = ScopedProxyMode.NO;
			}
		}

		// Replace the original bean definition with the target one, if necessary
		BeanDefinition beanDefToRegister = beanDef;
		if (proxyMode != ScopedProxyMode.NO) {
			BeanDefinitionHolder proxyDef = ScopedProxyCreator.createScopedProxy(
					new BeanDefinitionHolder(beanDef, beanName), this.registry,
					proxyMode == ScopedProxyMode.TARGET_CLASS);
			beanDefToRegister = new ConfigurationClassBeanDefinition(
					(RootBeanDefinition) proxyDef.getBeanDefinition(), configClass, metadata);
		}

		if (logger.isDebugEnabled()) {
			logger.debug(String.format("Registering bean definition for @Bean method %s.%s()",
					configClass.getMetadata().getClassName(), beanName));
		}

		this.registry.registerBeanDefinition(beanName, beanDefToRegister);
	}

通过方法注释更加确定了，最后一句代码正是容器注册代码。

我们大致来看看，前三句是把配置类拿出来、拿方法数据、方法名。后面两个判断是要看看要不要跳过，跳过就直接return了，不注册。再往后是把@Bean注解里的name对应的值拿出来，也就是别名拿出来并注册，后面也是各种把@Bean注解里的东西取出来操作，autowire模型（通过id还是name?）、initMethod、destroyMethod，各种细节配置就不多说了。最后通过this.registry.registerBeanDefinition就注册进去了。

值得注意的是beanName来自里面的：

List<String> names = new ArrayList<String(Arrays.asList(bean.getStringArray("name")));
String beanName = (!names.isEmpty() ? names.remove(0) : methodName);

也就是你的@Bean注解里面没有写name的时候，实际上默认就是拿方法名做beanName了!

至此，@Bean注解也分析完毕.

至此ioc构造器的三大方法中的refresh()，里的invokeBeanFactoryPostProcessors的部分就讲完了，剩下的下篇文章继续分析。