kubeadm 搭建 k8s 1.21 三主两从的简单学习

kubeadm 搭建高可用k8s1.21集群的方法

• 本文学习自: https://www.cnblogs.com/wjhlinux/p/14422021.html

---

第0部分: 整理的部分脚本

• 导出所有的images的方法

mkdir /k8s1.21 && cd /k8s1.21
for i in `docker images |grep -v REP |awk '{print $1}'` ; do j=`docker images |grep $i |awk '{print $2}'`  && docker save $i:$j > ${i##*/}.tar ; done

• 导入images的办法

分发images
执行
 cd /k8s1.21/ && for i in `ls` ; do docker load < $i ; done

导出的镜像内容为:

[root@k8s-master01 k8s1.21]# du -ah
121M    ./kube-apiserver.tar
119M    ./kube-proxy.tar
116M    ./kube-controller-manager.tar
50M     ./kube-scheduler.tar
42M     ./coredns.tar
243M    ./etcd.tar
186M    ./node.tar
9.3M    ./pod2daemon-flexvol.tar
157M    ./cni.tar
47M     ./kube-controllers.tar
178M    ./rabbitmq.tar
680K    ./pause-amd64.tar
1.3G    .

• 尽量使用 阿里云的镜像, 避免无法连接境外网络.

---

第1部分: 虚拟机规划

1.1 网络部分

序号	主机名	ip地址	备注说明
1	k8s-master01	10.110.83.231	master
2	k8s-master02	10.110.83.232	master
3	k8s-master02	10.110.83.233	master
4	k8s-node01	10.110.83.234	node
5	k8s-node02	10.110.83.235	node
6	k8s-master	10.110.83.230	vip

1.2 主机创建情况

创建虚拟机  进行主机配置, 包含修改内核参数, 互信ssh等操作,然后导入images 等操作.
修改 /etc/hosts 文件 添加 网络设置里面的 六个机器 主机名和 ip地址.
注意建议使用 centos7 的版本,然后升级到 kernel 4.19 的内核版本

1.3 克隆前设置

• 修改部分repo 设置.

curl -o /etc/yum.repos.d/CentOS-Base.repo https://mirrors.aliyun.com/repo/Centos-7.repo
yum-config-manager --add-repo https://mirrors.aliyun.com/docker-ce/linux/centos/docker-ce.repo
ln -sf /usr/share/zoneinfo/Asia/Shanghai /etc/localtime
echo 'Asia/Shanghai' >/etc/timezone
ntpdate time2.aliyun.com
cat <<EOF > /etc/yum.repos.d/kubernetes.repo
[kubernetes]
name=Kubernetes
baseurl=https://mirrors.aliyun.com/kubernetes/yum/repos/kubernetes-el7-x86_64/
enabled=1
gpgcheck=1
repo_gpgcheck=1
gpgkey=https://mirrors.aliyun.com/kubernetes/yum/doc/yum-key.gpg https://mirrors.aliyun.com/kubernetes/yum/doc/rpm-package-key.gpg
EOF

• 必备组件安装以及设置

systemctl  disable firewalld && systemctl disable dnsmasq
swapoff -a && sysctl -w vm.swappiness=0
sed -ri '/^[^#]*swap/s@^@#@' /etc/fstab

• 安装备份组件

yum install wget jq psmisc vim net-tools telnet yum-utils device-mapper-persistent-data lvm2 git ntpdate keepalived haproxy  -y

• 修改环境变量以及其他参数

注意前面两处需要手工添加 第三处 直接cat 执行命令即可.

vim /etc/security/limits.conf
* soft nofile 655360
* hard nofile 131072
* soft nproc 655350
* hard nproc 655350
* soft memlock unlimited
* hard memlock unlimited

vim /etc/modules-load.d/ipvs.conf
ip_vs
ip_vs_lc
ip_vs_wlc
ip_vs_rr
ip_vs_wrr
ip_vs_lblc
ip_vs_lblcr
ip_vs_dh
ip_vs_sh
ip_vs_fo
ip_vs_nq
ip_vs_sed
ip_vs_ftp
ip_vs_sh
nf_conntrack
ip_tables
ip_set
xt_set
ipt_set
ipt_rpfilter
ipt_REJECT
ipip

at <<EOF > /etc/sysctl.d/k8s.conf
net.ipv4.ip_forward = 1
net.bridge.bridge-nf-call-iptables = 1
net.bridge.bridge-nf-call-ip6tables = 1
fs.may_detach_mounts = 1
vm.overcommit_memory=1
vm.panic_on_oom=0
fs.inotify.max_user_watches=89100
fs.file-max=52706963
fs.nr_open=52706963
net.netfilter.nf_conntrack_max=2310720

net.ipv4.tcp_keepalive_time = 600
net.ipv4.tcp_keepalive_probes = 3
net.ipv4.tcp_keepalive_intvl =15
net.ipv4.tcp_max_tw_buckets = 36000
net.ipv4.tcp_tw_reuse = 1
net.ipv4.tcp_max_orphans = 327680
net.ipv4.tcp_orphan_retries = 3
net.ipv4.tcp_syncookies = 1
net.ipv4.tcp_max_syn_backlog = 16384
net.ipv4.ip_conntrack_max = 65536
net.ipv4.tcp_max_syn_backlog = 16384
net.ipv4.tcp_timestamps = 0
net.core.somaxconn = 16384
EOF

• 互信操作

ssh-keygen
ssh-copy-id root@10.110.83.230
ssh-copy-id root@127.0.0.1

• 升级内核

wget http://193.49.22.109/elrepo/kernel/el7/x86_64/RPMS/kernel-ml-devel-4.19.12-1.el7.elrepo.x86_64.rpm
wget http://193.49.22.109/elrepo/kernel/el7/x86_64/RPMS/kernel-ml-4.19.12-1.el7.elrepo.x86_64.rpm

yum localinstall -y kernel-ml*

grub2-set-default  0 && grub2-mkconfig -o /etc/grub2.cfg
grubby --args="user_namespace.enable=1" --update-kernel="$(grubby --default-kernel)"

# 设置完成 执行重启
reboot

• 安装组件

yum install docker-ce-19.03.* -y

安装完成后需要设置为开机自动启动
systemctl enable docker && systemctl restart docker
# 修改参数,不然启动会报错, 我这边就忘记修改报错了, 原作者写的很详细
cat > /etc/docker/daemon.json <<EOF
{
  "exec-opts": ["native.cgroupdriver=systemd"]
}
EOF

安装 kubeadm
yum install kubeadm -y

修改使用阿里云镜像
cat >/etc/sysconfig/kubelet<<EOF
KUBELET_EXTRA_ARGS="--cgroup-driver=systemd --pod-infra-container-image=registry.cn-hangzhou.aliyuncs.com/google_containers/pause-amd64:3.2"
EOF
设置开机启动
systemctl enable kubelet && systemctl restart kubelet

• 高可用网络设置
• haproxy

vim  /etc/haproxy/haproxy.cfg
# 添加内容为: 注意需要根据ip 规划修改自己的ip地址等内容.
global
  maxconn  2000
  ulimit-n  16384
  log  127.0.0.1 local0 err
  stats timeout 30s

defaults
  log global
  mode  http
  option  httplog
  timeout connect 5000
  timeout client  50000
  timeout server  50000
  timeout http-request 15s
  timeout http-keep-alive 15s

frontend monitor-in
  bind *:33305
  mode http
  option httplog
  monitor-uri /monitor

frontend k8s-master
  bind 0.0.0.0:16443
  bind 127.0.0.1:16443
  mode tcp
  option tcplog
  tcp-request inspect-delay 5s
  default_backend k8s-master

backend k8s-master
  mode tcp
  option tcplog
  option tcp-check
  balance roundrobin
  default-server inter 10s downinter 5s rise 2 fall 2 slowstart 60s maxconn 250 maxqueue 256 weight 100
  server k8s-master01   10.110.83.201:6443  check
  server k8s-master02   10.110.83.202:6443  check
  server k8s-master03   10.110.83.203:6443  check

• KeepAlived
  
  注意三个master都需要进行设置,可以在克隆前设置后 克隆完修改ip地址之后 在修改本脚本.

vim /etc/keepalived/keepalived.conf
! Configuration File for keepalived
global_defs {
    router_id LVS_DEVEL
script_user root
    enable_script_security
}
vrrp_script chk_apiserver {
    script "/etc/keepalived/check_apiserver.sh"
    interval 5
    weight -5
    fall 2
rise 1
}
vrrp_instance VI_1 {
    state MASTER
    interface ens33 # 这里要修改成ifconfig 查出来本地局域网ip地址对应的网卡信息
    mcast_src_ip 10.110.82.23x #这里需要修改为具体的master机器地址
    virtual_router_id 51
    priority 101
    advert_int 2
    authentication {
        auth_type PASS
        auth_pass K8SHA_KA_AUTH
    }
    virtual_ipaddress {
        10.110.83.230 #这里需要修改成 vip 的地址
    }
    track_script {
       chk_apiserver
    }
}

注意 最后的 track 脚本需要手动添加 主要内容如下:

注意 需要添加可执行权限: chmod +x /etc/keepalived/check_apiserver.sh

vim /etc/keepalived/check_apiserver.sh
#!/bin/bash

err=0
for k in $(seq 1 3)
do
    check_code=$(pgrep haproxy)
    if [[ $check_code == "" ]]; then
        err=$(expr $err + 1)
        sleep 1
        continue
    else
        err=0
        break
    fi
done

if [[ $err != "0" ]]; then
    echo "systemctl stop keepalived"
    /usr/bin/systemctl stop keepalived
    exit 1
else
    exit 0
fi

设置高可用服务自动启动

systemctl enable keepalived && systemctl enable haproxy

• 注意1: 设置完重启机器, 可以验证 vip 是否能够通 不通 需要重新处理.
• 注意2: 只需要mster 设置 haproxy和keepalived node 节点可以不处理.

1.4 设置完成之后 就可以clone 成 五个虚拟机 并且设置好ip地址了.

---

第二部分 集群初始化

2.1 创建配置文件

• 注意1: 原教程说需要每个master 进行创建, 但是我发现只需要创建一个 其他的使用 join的方式既可以.
• 注意2: 里面有三个ip地址, 第一个是当前master的地址, 第二个和第三个是vip的地址, 一定要分辨清楚.
• 注意3: 原教程里面使用该文件执行了images的pull 操作, 我这次将images 导出出来了, 所以可以只执行导入操作.

vim kubeadm-config.yaml

apiVersion: kubeadm.k8s.io/v1beta2
bootstrapTokens:
- groups:
  - system:bootstrappers:kubeadm:default-node-token
  token: 7t2weq.bjbawausm0jaxury
  ttl: 24h0m0s
  usages:
  - signing
  - authentication
kind: InitConfiguration
localAPIEndpoint:
  advertiseAddress: 10.110.83.231
  bindPort: 6443
nodeRegistration:
  criSocket: /var/run/dockershim.sock
  name: k8s-master01
  taints:
  - effect: NoSchedule
    key: node-role.kubernetes.io/master
---
apiServer:
  certSANs:
  - 10.110.83.230
  timeoutForControlPlane: 4m0s
apiVersion: kubeadm.k8s.io/v1beta2
certificatesDir: /etc/kubernetes/pki
clusterName: kubernetes
controlPlaneEndpoint: 10.110.83.230:16443
controllerManager: {}
dns:
  type: CoreDNS
etcd:
  local:
    dataDir: /var/lib/etcd
imageRepository: registry.cn-hangzhou.aliyuncs.com/google_containers
kind: ClusterConfiguration
kubernetesVersion: v1.20.4
networking:
  dnsDomain: cluster.local
  podSubnet: 172.168.0.0/12
  serviceSubnet: 10.96.0.0/12
scheduler: {}

执行镜像拉取的命令为:

kubeadm config images pull --config /root/kubeadm-config.yaml

2.2 master01 节点初始化

kubeadm init --config /root/kubeadm-config.yaml --upload-certs

• 注意1: master 节点加入和node节点加入的命令是不一样的:
• 注意2: 必须进行 修改当前用户下面的 .kube/config 文件才可以进行相关的kubectl 操作.

To start using your cluster, you need to run the following as a regular user:

  mkdir -p $HOME/.kube
  sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
  sudo chown $(id -u):$(id -g) $HOME/.kube/config

Alternatively, if you are the root user, you can run:

  export KUBECONFIG=/etc/kubernetes/admin.conf

You should now deploy a pod network to the cluster.
Run "kubectl apply -f [podnetwork].yaml" with one of the options listed at:
  https://kubernetes.io/docs/concepts/cluster-administration/addons/

You can now join any number of the control-plane node running the following command on each as root:

  kubeadm join 10.110.83.200:16443 --token 7t2weq.bjbawausm0jaxury \
        --discovery-token-ca-cert-hash sha256:cd36fbf1a304695af05c9438e2ea1388d0f9915fa4cda8d09ab9e65f6f6cd1d3 \
        --control-plane --certificate-key 79a90c89ec3e5a3d8cdf01888b65a1564dcc50d7a62fe1d625df8e9b16f223f8

Please note that the certificate-key gives access to cluster sensitive data, keep it secret!
As a safeguard, uploaded-certs will be deleted in two hours; If necessary, you can use
"kubeadm init phase upload-certs --upload-certs" to reload certs afterward.

Then you can join any number of worker nodes by running the following on each as root:

kubeadm join 10.110.83.200:16443 --token 7t2weq.bjbawausm0jaxury \
        --discovery-token-ca-cert-hash sha256:cd36fbf1a304695af05c9438e2ea1388d0f9915fa4cda8d09ab9e65f6f6cd1d3

2.3 其他节点加入

• 注意1: 获取到如上命令之后 在 master节点执行 带 control-plane的命令, node节点的加入不需要进行这样的处理
• 注意2: 如果想执行kubectl 相关操作, 必须跟master01 节点一样 将 kube.config 放到环境变量里面或者是 用户家目录指定目录下面.
• 注意3: 节点加入之后会提示NotReady, 需要创建网络组建才可以

[root@k8s-master01 ~]# kubectl get nodes
NAME           STATUS     ROLES                  AGE    VERSION
k8s-master01   NotReady   control-plane,master   174m   v1.21.0
k8s-master02   NotReady   control-plane,master   172m   v1.21.0
k8s-master03   NotReady   control-plane,master   171m   v1.21.0
k8s-node01     NotReady   <none>                 170m   v1.21.0
k8s-node02     NotReady   <none>                 170m   v1.21.0

2.4 安装calico

拉取相关文件:
wget https://docs.projectcalico.org/v3.8/getting-started/kubernetes/installation/hosted/kubernetes-datastore/calico-networking/1.7/calico.yaml
在当前目录下执行
kubectl apply -f calico.yaml

如果五个虚拟机内部都有了相关的images 一会儿就会可以使用了下:

[root@k8s-master01 ~]# kubectl get nodes
NAME           STATUS   ROLES                  AGE     VERSION
k8s-master01   Ready    control-plane,master   5h22m   v1.21.0
k8s-master02   Ready    control-plane,master   5h21m   v1.21.0
k8s-master03   Ready    control-plane,master   5h20m   v1.21.0
k8s-node01     Ready    <none>                 5h18m   v1.21.0
k8s-node02     Ready    <none>                 5h19m   v1.21.0

---

第三部分 安装helm以及简单使用

• 下载

wget https://get.helm.sh/helm-v3.5.4-linux-amd64.tar.gz
解压缩以及将文件放到 /usr/bin 目录下即可

添加仓库

helm repo add stable http://mirror.azure.cn/kubernetes/charts
helm repo add aliyun https://kubernetes.oss-cn-hangzhou.aliyuncs.com/charts
helm repo update

安装ingress

helm repo add ingress-nginx https://kubernetes.github.io/ingress-nginx
helm pull ingress ingress-nginx/ingress-nginx

修改配置文件进行简单处理

tar -xf ingress-nginx-3.30.0.tgz && cd ingress-nginx
vim values.yaml
# 修改controller镜像地址
repository: registry.cn-beijing.aliyuncs.com/dotbalo/controller
​
# dnsPolicy
dnsPolicy: ClusterFirstWithHostNet
​
# 使用hostNetwork,即使用宿主机上的端口80 443
hostNetwork: true
​
# 使用DaemonSet,将ingress部署在指定节点上
kind: DaemonSet
​
# 节点选择，将需要部署的节点打上ingress=true的label
  nodeSelector:
    kubernetes.io/os: linux
    ingress: "true"

# 修改type,改为ClusterIP。如果在云环境，有loadbanace可以使用loadbanace
type: ClusterIP
​
# 修改kube-webhook-certgen镜像地址
registry.cn-beijing.aliyuncs.com/dotbalo/kube-webhook-certgen

进行安装
kubectl create ns ingress-nginx
helm install ingress-nginx -n ingress-nginx
kubectl get pods -n ingress-nginx -owide

本部分学习自:

https://www.cnblogs.com/bigberg/p/13926052.html

第四部分 nfs处理

• 这一段改到StorageClass学习里面了.

helm install nfs-client-provisioner \
  --set storageClass.name=nfs-client \
  --set storageClass.defaultClass=true \
  --set nfs.server=10.110.83.201 \
  --set nfs.path=/k8snfs \
  apphub/nfs-client-provisioner