Centos6.8下编译安装LAMP的操作记录梳理
之前用的最多的web框架是LNMP，偶尔也会用到LAMP。接下来简单说下LAMP环境的部署记录，这里选择源码安装的方式：
LAMP相关安装包下载地址：https://pan.baidu.com/s/1pYo9X7f1vy5d70eV0RDYWA
提取密码：ebj8
1）Mysql的安装
部署过程参考：http://www.cnblogs.com/kevingrace/p/6109679.html
2）Apache的安装（下面各软件版本要对应，否则会因为版本不兼容而导致Apache编译失败）
LAMP编译安装软件包下载地址：https://pan.baidu.com/s/1MPga1bL1sutGeubW-uXcpg
提取密码：qp2c
依赖软件安装
[root@jenkins-server ~]# yum install gcc gcc-c++ make wget
[root@jenkins-server ~]# yum install zlib-devel openssl-devel
[root@jenkins-server ~]# yum install -y perl perl-devel
apr编译安装（下载地址：http://archive.apache.org/dist/apr/）
[root@jenkins-server ~]# cd /usr/local/src/
[root@jenkins-server src]# wget http://mirrors.cnnic.cn/apache//apr/apr-1.5.2.tar.gz
[root@jenkins-server src]# tar zxvf apr-1.5.2.tar.gz
[root@jenkins-server src]# cd apr-1.5.2
[root@jenkins-server apr-1.5.2]# ./configure --prefix=/usr/local/apache/apr && make && make install
apr-util编译安装（下载地址：http://apr.apache.org/download.cgi）
[root@jenkins-server src]# wget http://mirrors.cnnic.cn/apache//apr/apr-util-1.5.4.tar.gz
[root@jenkins-server src]# tar zxvf apr-util-1.5.4.tar.gz
[root@jenkins-server src]# cd apr-util-1.5.4
[root@jenkins-server apr-util-1.5.4]# ./configure --prefix=/usr/local/apache/apr-util --with-apr=/usr/local/apache/apr
[root@jenkins-server apr-util-1.5.4]# make && make install
如果出现报错：
make[1]: *** [xml/apr_xml.lo] Error 1
make[1]: Leaving directory `/usr/local/src/apr-util-1.6.1'
make: *** [all-recursive] Error 1 解决办法：yum install expat-devel -y
pcre编译安装
[root@jenkins-server src]# wget https://jaist.dl.sourceforge.net/project/pcre/pcre/8.37/pcre-8.37.tar.gz
[root@jenkins-server src]# tar zxvf pcre-8.37.tar.gz
[root@jenkins-server src]# cd pcre-8.37
[root@jenkins-server pcre-8.37]# ./configure && make && make install
apache编译安装
[root@jenkins-server src]# wget http://www.apache.org/dist/httpd/httpd-2.4.25.tar.gz
[root@jenkins-server src]# tar zxvf httpd-2.4.25.tar.gz
[root@jenkins-server src]# cd httpd-2.4.25
[root@jenkins-server httpd-2.4.25]# ./configure --prefix=/usr/local/apache --with-apr=/usr/local/apache/apr/bin/apr-1-config --with-apr-util=/usr/local/apache/apr-util/bin/apu-1-config --enable-module=so --enable-mods-shared=all --enable-deflate --enable-expires --enable-headers --enable-cache --enable-file-cache --enable-mem-cache --enable-disk-cache --enable-mime-magic --enable-authn-dbm --enable-vhost-alias --enable-so --enable-rewrite --enable-ssl --with-mpm=prefork
[root@jenkins-server httpd-2.4.25]# make && make install
配置apache
[root@jenkins-server src]# cd /usr/local/apache/conf/
[root@jenkins-server conf]# vim httpd.conf
........
ServerName localhost:80
........
AddType application/x-compress .Z //这两行是默认就有的，在这两行下面添加下面两行
AddType application/x-gzip .gz .tgz AddType application/x-httpd-php .php //使apache支持php
AddType application/x-httpd-php-source .php5
......
LoadModule php5_module modules/libphp5.so //添加php模块，这个在后面php编译安装后就会自动加进来。最后一定要检查这里是否有php模块产生
......
DocumentRoot "/var/www/html" //修改apache站点目录路径，默认是/usr/local/apache/htdocs。注意这两行要修改一致。
<Directory "/var/www/html">
.......
DirectoryIndex index.html index.php //添加默认的首页面，index.html和index.php
......
Include conf/extra/mxwang.conf //添加虚拟主机配置文件
[root@jenkins-server conf]# cd extra/
[root@jenkins-server extra]# vim mxwang.conf
<VirtualHost *:80>
ServerName www.mxwang.cn
DocumentRoot /var/www/html/ ErrorLog "/var/log/httpd/www.mxwang.cn-error_log"
CustomLog "/var/log/httpd/www.mxwang.cn-access_log" common </VirtualHost>
启动apache
[root@jenkins-server extra]# /usr/local/apache/bin/httpd
[root@jenkins-server extra]# ps -ef|grep http
root 30145 1 2 19:53 ? 00:00:00 /usr/local/apache/bin/httpd
nobody 30146 30145 0 19:53 ? 00:00:00 /usr/local/apache/bin/httpd
nobody 30147 30145 0 19:53 ? 00:00:00 /usr/local/apache/bin/httpd
nobody 30148 30145 0 19:53 ? 00:00:00 /usr/local/apache/bin/httpd
nobody 30149 30145 0 19:53 ? 00:00:00 /usr/local/apache/bin/httpd
nobody 30150 30145 0 19:53 ? 00:00:00 /usr/local/apache/bin/httpd
root 30156 2090 0 19:53 pts/3 00:00:00 grep --color http
[root@jenkins-server extra]# cat /var/www/html/test.html
sdfasdfasdf
测试访问：http://www.mxwang.cn/test.html
3）PHP编译安装
[root@jenkins-server ~]# yum install libxml2-devel curl-devel libjpeg libjpeg-devel libpng libpng-devel freetype freetype-devel net-snmp net-snmp-devel
[root@jenkins-server ~]# cd /usr/local/src/
[root@jenkins-server src]# wget http://ftp.gnu.org/pub/gnu/libiconv/libiconv-1.14.tar.gz
[root@jenkins-server src]# tar zxvf libiconv-1.14.tar.gz
[root@jenkins-server src]# cd libiconv-1.14
[root@jenkins-server libiconv-1.14]# ./configure --prefix=/usr/local/php/libiconv && make && make install
[root@jenkins-server src]# wget http://nchc.dl.sourceforge.net/project/mcrypt/Libmcrypt/2.5.8/libmcrypt-2.5.8.tar.gz
[root@jenkins-server src]# tar zxvf libmcrypt-2.5.8.tar.gz
[root@jenkins-server src]# cd libmcrypt-2.5.8
[root@jenkins-server libmcrypt-2.5.8]# ./configure && make && make install
[root@jenkins-server libmcrypt-2.5.8]# /sbin/ldconfig && cd libltdl/
[root@jenkins-server libltdl]# ./configure --enable-ltdl-install && make && make install
[root@jenkins-server src]# wget http://nchc.dl.sourceforge.net/project/mhash/mhash/0.9.9.9/mhash-0.9.9.9.tar.gz
[root@jenkins-server src]# tar zxvf mhash-0.9.9.9.tar.gz
[root@jenkins-server src]# cd mhash-0.9.9.9
[root@jenkins-server mhash-0.9.9.9]# ./configure && make && make install
[root@jenkins-server src]# wget http://nchc.dl.sourceforge.net/project/mcrypt/MCrypt/2.6.8/mcrypt-2.6.8.tar.gz
[root@jenkins-server src]# tar zxvf mcrypt-2.6.8.tar.gz
[root@jenkins-server src]# cd mcrypt-2.6.8
[root@jenkins-server mcrypt-2.6.8]# /sbin/ldconfig && export LD_LIBRARY_PATH=/usr/local/lib: LD_LIBRARY_PATH
[root@jenkins-server mcrypt-2.6.8]# ./configure && make && make install
[root@jenkins-server src]# wget http://cn2.php.net/distributions/php-5.6.15.tar.gz
[root@jenkins-server src]# tar zxvf php-5.6.15.tar.gz
[root@jenkins-server src]# cd php-5.6.15
[root@jenkins-server php-5.6.15]# ./configure --prefix=/usr/local/php --with-config-file-path=/usr/local/php/etc --with-iconv=/usr/local/php/libiconv --with-apxs2=/usr/local/apache/bin/apxs --with-mysql=mysqlnd --with-mysqli=mysqlnd --with-pdo-mysql=mysqlnd --with-gd --with-jpeg-dir --with-png-dir --with-pear --with-freetype-dir --with-zlib --with-libxml-dir --with-iconv-dir --with-xmlrpc --with-mhash --with-mcrypt --with-curl --with-openssl --with-snmp --with-gettext --enable-pdo --enable-mbstring --enable-ctype --enable-simplexml --enable-ftp --enable-sockets --enable-gd-native-ttf --enable-sysvsem --enable-exif --enable-sysvshm --enable-xml --enable-dom --enable-simplexml --enable-shmop --enable-zip --enable-mbregex --enable-bcmath --enable-inline-optimization --enable-soap
[root@jenkins-server php-5.6.15]# make && make install
[root@jenkins-server php-5.6.15]# cp php.ini-production /usr/local/php/etc/php.ini
[root@jenkins-server php-5.6.15]# vim /etc/profile
......
export PATH=$PATH:/usr/local/php/bin
[root@jenkins-server php-5.6.15]# source /etc/profile
[root@jenkins-server src]# /usr/local/php/bin/php -m
[PHP Modules]
bcmath
Core
ctype
curl
date
dom
ereg
exif
fileinfo
filter
ftp
gd
gettext
hash
iconv
json
libxml
mbstring
mcrypt
mhash
mysql
mysqli
mysqlnd
openssl
pcre
PDO
pdo_mysql
pdo_sqlite
Phar
posix
Reflection
session
shmop
SimpleXML
snmp
soap
sockets
SPL
sqlite3
standard
sysvsem
sysvshm
tokenizer
xml
xmlreader
xmlrpc
xmlwriter
zip
zlib
[Zend Modules]
一定要记得重启aapche
[root@jenkins-server src]# pkill -9 http
[root@jenkins-server src]# ps -ef|grep http
root 31091 12736 0 20:06 pts/6 00:00:00 grep --color http
[root@jenkins-server src]# /usr/local/apache/bin/httpd
[root@jenkins-server src]# ps -ef|grep http
root 31098 1 7 20:06 ? 00:00:00 /usr/local/apache/bin/httpd
nobody 31099 31098 0 20:06 ? 00:00:00 /usr/local/apache/bin/httpd
nobody 31100 31098 0 20:06 ? 00:00:00 /usr/local/apache/bin/httpd
nobody 31101 31098 0 20:06 ? 00:00:00 /usr/local/apache/bin/httpd
nobody 31102 31098 0 20:06 ? 00:00:00 /usr/local/apache/bin/httpd
nobody 31103 31098 0 20:06 ? 00:00:00 /usr/local/apache/bin/httpd
root 31106 12736 0 20:06 pts/6 00:00:00 grep --color http
测试php：
[root@jenkins-server src]# cat /var/www/html/test.php
<?php
phpinfo()
?>
访问：www.mxwang.cn/test.php
注意几点：
php.ini文件中的设置时区
[root@jenkins-server src]# vim /usr/local/php/etc/php.ini
......
date.timezone = PRC
保证站点目录下的文件权限和apache启动用户一致：
[root@jenkins-server src]# ps -ef|grep http
root 31098 1 0 20:06 ? 00:00:00 /usr/local/apache/bin/httpd
nobody 31099 31098 0 20:06 ? 00:00:00 /usr/local/apache/bin/httpd
nobody 31100 31098 0 20:06 ? 00:00:00 /usr/local/apache/bin/httpd
nobody 31101 31098 0 20:06 ? 00:00:00 /usr/local/apache/bin/httpd
nobody 31102 31098 0 20:06 ? 00:00:00 /usr/local/apache/bin/httpd
nobody 31103 31098 0 20:06 ? 00:00:00 /usr/local/apache/bin/httpd
nobody 31151 31098 0 20:06 ? 00:00:00 /usr/local/apache/bin/httpd
root 31409 12736 0 20:10 pts/6 00:00:00 grep --color http
[root@jenkins-server src]# ll /var/www/html/
total 40232
drwxr-xr-x. 3 777 nobody 4096 Jan 5 12:47 addons
-rw-r--r--. 1 777 nobody 464 Jan 5 12:47 admin.php
drwxr-xr-x. 2 777 nobody 4096 Jan 5 12:47 api
-rw-r--r--. 1 777 nobody 216 Jan 5 12:47 api.php
......
可以将上面的安装过程归档在一个安装脚本里进行一键安装
=================apache下http强制转https配置==================
1）在httpd.conf文件里使下面模块生效
[root@back ~]# cat /usr/local/apache/conf/httpd.conf|grep rewrite_module
.......
LoadModule rewrite_module modules/mod_rewrite.so #打开重写跳转功能 2）httpd.conf配置文件或者是在httpd-vhost.conf文件里修改
[root@back ~]# cat /usr/local/apache/conf/httpd.conf
.......
DocumentRoot "/data/vhosts"
<Directory "/data/vhosts">
Options FollowSymLinks MultiViews Includes
AllowOverride All
Require all granted
</Directory> 3）在网站根目录下面添加该文件“.htaccess” 目录访问控制文件，并添加如下内容：
#---------------------------------
RewriteEngine on #开启重定向引擎
RewriteBase / #可以不设置
RewriteCond %{SERVER_PORT} !^443$ #非443端口的数据全部进行重定向
RewriteRule ^.*$ https://%{SERVER_NAME}%{REQUEST_URI} [L,R] #把需要重定向的内容重定向到https
#---------------------------------- #如果是默认不是443端口，那么可以在最后一行写成这样
RewriteRule ^.*$ https://www.wang.com:8443 #当然如果默认是443的话，也可以这么写
RewriteRule ^.*$ https://www.wang.com #该 .htaccess 需要放置在网站的根目录下面才可以生效 #----------------------------------
含义是这样的：为了让用户访问传统的http://转到https://上来，用了一下rewrite规则:
第一句：启动rewrite引擎
第二句：rewrite的条件是访问的服务器端口不是443端口
第三句：这是正则表达式，^是开头，$是结束，/?表示有没有/都可以（0或1个），(.*)是任何数量的任意字符
整句的意思是讲：启动rewrite模块，将所有访问非443端口的请求，url地址内容不变，将http://变成https://。
==========================================================
看看下面一例：
[root@back ~]# cat /usr/local/apache/conf/httpd.conf|grep -v "#"|grep -v "^$"
ServerRoot "/usr/local/apache"
Listen 80
LoadModule authn_file_module modules/mod_authn_file.so #这些模块功能的配置最好都开启了，打开所有LoadModule前面的注释，否则apache启动可能报错。
LoadModule authn_core_module modules/mod_authn_core.so
LoadModule authz_host_module modules/mod_authz_host.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_user_module modules/mod_authz_user.so
LoadModule authz_core_module modules/mod_authz_core.so
LoadModule access_compat_module modules/mod_access_compat.so
LoadModule auth_basic_module modules/mod_auth_basic.so
LoadModule socache_shmcb_module modules/mod_socache_shmcb.so
LoadModule reqtimeout_module modules/mod_reqtimeout.so
LoadModule filter_module modules/mod_filter.so
LoadModule mime_module modules/mod_mime.so
LoadModule log_config_module modules/mod_log_config.so
LoadModule env_module modules/mod_env.so
LoadModule headers_module modules/mod_headers.so
LoadModule setenvif_module modules/mod_setenvif.so
LoadModule version_module modules/mod_version.so
LoadModule ssl_module modules/mod_ssl.so #打开https功能模块
LoadModule unixd_module modules/mod_unixd.so
LoadModule status_module modules/mod_status.so
LoadModule autoindex_module modules/mod_autoindex.so
LoadModule dir_module modules/mod_dir.so
LoadModule alias_module modules/mod_alias.so
LoadModule rewrite_module modules/mod_rewrite.so #打开重写跳转功能模块
LoadModule php5_module modules/libphp5.so
<IfModule unixd_module>
User nobody
Group nobody
</IfModule>
ServerAdmin you@example.com
ServerName www.example.com:80
<Directory />
AllowOverride none
Require all denied
</Directory>
DocumentRoot "/data/vhosts"
<Directory "/data/vhosts">
Options FollowSymLinks MultiViews Includes
AllowOverride All
Require all granted
</Directory>
<IfModule dir_module>
DirectoryIndex index.php index.html
</IfModule>
<Files ".ht*">
Require all denied
</Files>
ErrorLog "logs/error_log"
LogLevel warn
<IfModule log_config_module>
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
<IfModule logio_module>
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
</IfModule>
CustomLog "logs/access_log" combined
</IfModule>
<IfModule alias_module>
ScriptAlias /cgi-bin/ "/usr/local/apache/cgi-bin/"
</IfModule>
<IfModule cgid_module>
</IfModule>
<Directory "/usr/local/apache/cgi-bin">
AllowOverride None
Options None
Require all granted
</Directory>
<IfModule headers_module>
RequestHeader unset Proxy early
</IfModule>
<IfModule mime_module>
TypesConfig conf/mime.types
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
AddType application/x-httpd-php .php .phtml .php3 .inc
AddType application/x-httpd-php-source .phps
</IfModule>
Include conf/extra/httpd-mpm.conf
Include conf/extra/httpd-info.conf
Include conf/extra/httpd-vhosts.conf
<IfModule proxy_html_module>
Include conf/extra/proxy-html.conf
</IfModule>
Include conf/extra/httpd-ssl.conf
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule> [root@back ~]# cd /usr/local/apache/conf
[root@back conf]# ls
wang.cer extra httpd.conf.bak httpd_orig.conf mime.types server.crt server.key
wang.key httpd.conf httpd.conf-orig magic original server.csr server.key.unsecure
[root@back conf]# cd extra/
[root@back extra]# ls
httpd-autoindex.conf httpd-languages.conf httpd-ssl.conf httpd-userdir.conf
httpd-dav.conf httpd-manual.conf httpd-ssl.conf.bak httpd-vhosts.conf
httpd-default.conf httpd-mpm.conf httpd-ssl.conf-orig httpd-vhosts.conf-orig
httpd-info.conf httpd-multilang-errordoc.conf httpd-ssl_orig.conf proxy-html.conf [root@back extra]# cat httpd-vhosts.conf |grep -v "#"|grep -v "^$"
<Directory "/data/vhosts/">
Options FollowSymLinks
AllowOverride All
Require all granted
</Directory> <VirtualHost *:80>
ServerAdmin g-ops-all@wang.com
DocumentRoot "/data/vhosts/limesurvey/"
ServerName wj.wang.com
ErrorLog "logs/limesurvey.wang.com-error_log"
CustomLog "logs/limesurvey.wang.com-access_log" combined
</VirtualHost> <VirtualHost *:80>
ServerAdmin g-ops-all@wang.com
DocumentRoot "/data/vhosts/nextcloud/"
ServerName nextcloud.wang.com
ErrorLog "logs/nextcloud.wang.com-error_log"
CustomLog "logs/nextcloud.wang.com-access_log" combined
</VirtualHost> <VirtualHost *:80>
ServerAdmin g-ops-all@wang.com
DocumentRoot "/data/vhosts/opensns/"
ServerName opensns.wang.com
ErrorLog "logs/opensns.wang.com-error_log"
CustomLog "logs/opensns.wang.com-access_log" combined
<Directory "/data/vhosts/opensns/">
Options FollowSymlinks
AllowOverride All
Require all granted
</Directory>
</VirtualHost> <VirtualHost *:80>
ServerAdmin g-ops-all@wang.com
DocumentRoot "/data/vhosts/discuz/"
ServerName discuz.wang.com
ErrorLog "logs/discuz.wang.com-error_log"
CustomLog "logs/discuz.wang.com-access_log" combined
</VirtualHost> [root@back extra]# cat httpd-ssl.conf |grep -v "#"|grep -v "^$"
Listen 0.0.0.0:443
SSLCipherSuite HIGH:MEDIUM:!MD5:!RC4
SSLProxyCipherSuite HIGH:MEDIUM:!MD5:!RC4
SSLHonorCipherOrder on
SSLProtocol all -SSLv3
SSLProxyProtocol all -SSLv3
SSLPassPhraseDialog builtin
SSLSessionCache "shmcb:/usr/local/apache/logs/ssl_scache(512000)"
SSLSessionCacheTimeout 300 <VirtualHost *:443>
ServerAdmin g-ops-all@wang.com
DocumentRoot "/data/vhosts/limesurvey/"
ServerName limesurvey.wang.com
SSLEngine on
SSLCertificateFile "/usr/local/apache/conf/wang.cer"
SSLCertificateKeyFile "/usr/local/apache/conf/wang.key"
ErrorLog "logs/limesurvey.wang.com-https-error_log"
CustomLog "logs/limesurvey.wang.com-https-access_log" combined
</VirtualHost> <VirtualHost *:443>
ServerAdmin g-ops-all@wang.com
DocumentRoot "/data/vhosts/opensns/"
ServerName opensns.wang.com
SSLEngine on
SSLCertificateFile "/usr/local/apache/conf/server.crt"
SSLCertificateKeyFile "/usr/local/apache/conf/server.key"
ErrorLog "logs/opensns.wang.com-https-error_log"
CustomLog "logs/opensns.wang.com-https-access_log" combined
</VirtualHost> <VirtualHost *:443>
ServerAdmin g-ops-all@wang.com
DocumentRoot "/data/vhosts/nextcloud/"
ServerName nextcloud.wang.com
SSLEngine on
SSLCertificateFile "/usr/local/apache/conf/server.crt"
SSLCertificateKeyFile "/usr/local/apache/conf/server.key"
ErrorLog "logs/nextcloud.wang.com-https-error_log"
CustomLog "logs/nextcloud.wang.com-https-access_log" combined
</VirtualHost> <VirtualHost *:443>
ServerAdmin g-ops-all@wang.com
DocumentRoot "/data/vhosts/discuz/"
ServerName discuz.wang.com
SSLEngine on
SSLCertificateFile "/usr/local/apache/conf/server.crt"
SSLCertificateKeyFile "/usr/local/apache/conf/server.key"
ErrorLog "logs/opensns.wang.com-https-error_log"
CustomLog "logs/opensns.wang.com-https-access_log" combined
</VirtualHost> <VirtualHost _default_:443>
DocumentRoot "/data/vhosts"
ServerName test.com
ServerAdmin g-ops-all@wang.com
ErrorLog "/usr/local/apache/logs/discuz-https-error_log"
TransferLog "/usr/local/apache/logs/discuz-https-access_log"
SSLEngine on
SSLCertificateFile "/usr/local/apache/conf/server.crt"
SSLCertificateKeyFile "/usr/local/apache/conf/server.key"
<FilesMatch "\.(cgi|shtml|phtml|php)$">
SSLOptions +StdEnvVars
</FilesMatch>
<Directory "/usr/local/apache/cgi-bin">
SSLOptions +StdEnvVars
</Directory>
BrowserMatch "MSIE [2-5]" \
nokeepalive ssl-unclean-shutdown \
downgrade-1.0 force-response-1.0
CustomLog "/usr/local/apache/logs/ssl_request_log" \
"%t %h %{SSL_PROTOCOL}x %{SSL_CIPHER}x \"%r\" %b"
</VirtualHost> http强制跳转到https，在每个站点的根目录下添加.htaccess文件，配置如下：
[root@back ~]# cat /data/vhosts/limesurvey/.htaccess
<IfModule mod_rewrite.c>
RewriteEngine on # RewriteBase /
RewriteCond %{SERVER_PORT} !^443$
RewriteRule ^.*$ https://%{SERVER_NAME}%{REQUEST_URI} [L,R] # if a directory or a file exists, use it directly
RewriteCond %{REQUEST_FILENAME} !-f # otherwise forward it to index.php
RewriteRule . index.php
</IfModule>
# General setting to properly handle LimeSurvey paths
# AcceptPathInfo on 这样，访问http://limesurvey.wang.com就会强制跳转为https://limesurvey.wang.com。 其他域名配置一样！
============================总结=========================
Apache强制HTTP全部跳转到HTTPS，只需要在站点根目录下添加.htaccess文件，在.htaccess加入下面规则
1）
RewriteEngine On
RewriteCond %{SERVER_PORT} 80
RewriteRule ^(.*)$ https://%{HTTP_HOST}/$1 [R,L] 或者 RewriteEngine On
RewriteCond %{HTTPS} !=on
RewriteRule ^(.*) https://%{SERVER_NAME}/$1 [R,L] 2）强制HTTPS方式访问，对WWW或顶级域名不做跳转。
RewriteEngine On
RewriteCond %{SERVER_PORT} 80
RewriteRule ^(.*)$ https://www.kevin.com/$1 [L,R=301] 3）强制HTTPS方式访问，并自动将顶级域名跳转到WWW。
RewriteEngine On
RewriteCond %{HTTP_HOST} !^www.kevin.com$ [NC]
RewriteRule ^(.*)$ https://www.kevin.com/$1 [L,R=301]
RewriteCond %{SERVER_PORT} 80
RewriteRule ^(.*)$ https://www.kevin.com/$1 [L,R=301] 4）强制HTTPS方式访问，并自动将WWW跳转到顶级域名。
RewriteEngine On
RewriteCond %{HTTP_HOST} !^kevin.com$ [NC]
RewriteRule ^(.*)$ https://kevin.com/$1 [L,R=301]
RewriteCond %{SERVER_PORT} 80
RewriteRule ^(.*)$ https://kevin.com/$1 [L,R=301] 5）站点绑定多个域名，只允许www.kevin.com 跳转
RewriteEngine On
RewriteCond %{SERVER_PORT} 80
RewriteCond %{HTTP_HOST} ^kevin.com [NC,OR]
RewriteCond %{HTTP_HOST} ^www.kevin.com [NC]
RewriteRule ^(.*)$ https://%{HTTP_HOST}/$1 [R,L]
==================apache下多端口虚拟主机配置====================
apache服务器上（apache+php）配置三个域名zpadmin.wang.com、 zpwechat.wang.com、zpimages.wang.com
然后在前面LB层进行反向代理配置（apache真实服务器没有外网ip） 三个域名分别对应三个端口8080、8081、8082，注意http.conf文件里的Listen
[root@localhost ~]# cat /data/apache/conf/httpd.conf|grep -v "#"|grep -v "^$"
ServerRoot "/data/apache"
Listen 192.168.1.32:8080
Listen 192.168.1.32:8081
Listen 192.168.1.32:8082
LoadModule authn_file_module modules/mod_authn_file.so
LoadModule authn_core_module modules/mod_authn_core.so
LoadModule authz_host_module modules/mod_authz_host.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_user_module modules/mod_authz_user.so
LoadModule authz_core_module modules/mod_authz_core.so
LoadModule access_compat_module modules/mod_access_compat.so
LoadModule auth_basic_module modules/mod_auth_basic.so
LoadModule socache_shmcb_module modules/mod_socache_shmcb.so
LoadModule reqtimeout_module modules/mod_reqtimeout.so
LoadModule filter_module modules/mod_filter.so
LoadModule mime_module modules/mod_mime.so
LoadModule log_config_module modules/mod_log_config.so
LoadModule env_module modules/mod_env.so
LoadModule headers_module modules/mod_headers.so
LoadModule setenvif_module modules/mod_setenvif.so
LoadModule version_module modules/mod_version.so
LoadModule ssl_module modules/mod_ssl.so
LoadModule unixd_module modules/mod_unixd.so
LoadModule status_module modules/mod_status.so
LoadModule autoindex_module modules/mod_autoindex.so
LoadModule dir_module modules/mod_dir.so
LoadModule alias_module modules/mod_alias.so
LoadModule rewrite_module modules/mod_rewrite.so
LoadModule php5_module modules/libphp5.so
<IfModule unixd_module>
User nobody
Group nobody
</IfModule>
ServerAdmin you@example.com
ServerName www.example.com:80
<Directory />
AllowOverride none
Require all denied
</Directory>
DocumentRoot "/data/vhosts"
<Directory "/data/vhosts">
Options FollowSymLinks MultiViews Includes
AllowOverride All
Require all granted
</Directory>
<IfModule dir_module>
DirectoryIndex index.php index.html
</IfModule>
<Files ".ht*">
Require all denied
</Files>
ErrorLog "logs/error_log"
LogLevel warn
<IfModule log_config_module>
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
<IfModule logio_module>
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
</IfModule>
CustomLog "logs/access_log" combined
</IfModule>
<IfModule alias_module>
ScriptAlias /cgi-bin/ "/data/apache/cgi-bin/"
</IfModule>
<IfModule cgid_module>
</IfModule>
<Directory "/data/apache/cgi-bin">
AllowOverride None
Options None
Require all granted
</Directory>
<IfModule headers_module>
RequestHeader unset Proxy early
</IfModule>
<IfModule mime_module>
TypesConfig conf/mime.types
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
AddType application/x-httpd-php .php .phtml .php3 .inc
AddType application/x-httpd-php-source .phps
</IfModule>
Include conf/extra/httpd-mpm.conf
Include conf/extra/httpd-info.conf
Include conf/extra/httpd-vhosts.conf
<IfModule proxy_html_module>
Include conf/extra/proxy-html.conf
</IfModule>
Include conf/extra/httpd-ssl.conf
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule> 虚拟主机配置如下：
注意，Apache2.4.x版本版本后就取消了NameVirtualHost配置。
所以配置对应端口的虚拟主机时不需要在<VirtualHost 192.168.1.32:8080>的前面再设置 NameVirtualHost 192.168.1.32:8080了
[root@localhost ~]# cat /data/apache/conf/extra/httpd-vhosts.conf
# Virtual Hosts
#
# Required modules: mod_log_config # If you want to maintain multiple domains/hostnames on your
# machine you can setup VirtualHost containers for them. Most configurations
# use only name-based virtual hosts so the server doesn't need to worry about
# IP addresses. This is indicated by the asterisks in the directives below.
#
# Please see the documentation at
# <URL:http://httpd.apache.org/docs/2.4/vhosts/>
# for further details before you try to setup virtual hosts.
#
# You may use the command line option '-S' to verify your virtual host
# configuration. #
# VirtualHost example:
# Almost any Apache directive may go into a VirtualHost container.
# The first VirtualHost section is used for all requests that do not
# match a ServerName or ServerAlias in any <VirtualHost> block.
#
# <VirtualHost 192.168.1.32:80>
# ServerAdmin webmaster@dummy-host.example.com
# DocumentRoot "/data/apache/docs/dummy-host.example.com"
# ServerName dummy-host.example.com
# ServerAlias www.dummy-host.example.com
# ErrorLog "logs/dummy-host.example.com-error_log"
# CustomLog "logs/dummy-host.example.com-access_log" common
# </VirtualHost> # <VirtualHost 192.168.1.32:80>
# ServerAdmin webmaster@dummy-host2.example.com
# DocumentRoot "/data/apache/docs/dummy-host2.example.com"
# ServerName dummy-host2.example.com
# ErrorLog "logs/dummy-host2.example.com-error_log"
# CustomLog "logs/dummy-host2.example.com-access_log" common
# </VirtualHost> # =============================================================
# Add by Francis Hao @ 2017-06-27 <Directory "/data/vhosts/">
Options FollowSymLinks
# Includes ExecCGI
AllowOverride All
Require all granted
</Directory> <VirtualHost 192.168.1.32:8080>
ServerAdmin g-ops-all@wang.com
DocumentRoot "/data/vhosts/shellking/backend/web"
ServerName zpadmin.wang.com
ErrorLog "logs/zpadmin-error_log"
CustomLog "logs/zpadmin-access_log" combined
</VirtualHost> <VirtualHost 192.168.1.32:8081>
ServerAdmin g-ops-all@wang.com
DocumentRoot "/data/vhosts/shellking/wechat/web"
ServerName zpwechat.wang.com
ErrorLog "logs/zpwechat-error_log"
CustomLog "logs/zpwechat-access_log" combined
</VirtualHost> <VirtualHost 192.168.1.32:8082>
ServerAdmin g-ops-all@wang.com
DocumentRoot "/data/vhosts/shellking/upload"
ServerName zpimages.wang.com
ErrorLog "logs/zpimages-error_log"
CustomLog "logs/zpimages-access_log" combined
</VirtualHost> 前面LB层的反向代理配置：
[root@nginx-web01 ~]# cat /data/nginx/conf/vhosts/zpadmin.conf
upstream zpadmin {
server 192.168.1.32:8080 max_fails=3 fail_timeout=10s;
} server {
listen 80;
server_name zpadmin.wang.com; access_log logs/zpadmin_access.log main;
error_log logs/zpadmin_error.log; location / {
proxy_pass http://zpadmin/;
proxy_next_upstream error timeout invalid_header http_500 http_502 http_503;
proxy_set_header Host $host;
proxy_set_header X-Real-IP $remote_addr;
proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
#proxy_set_header X-Forwarded-Proto https;
proxy_redirect off;
}
}
[root@nginx-web01 ~]# cat /data/nginx/conf/vhosts/zpwechat.conf
upstream zpwechat {
server 192.168.1.32:8081 max_fails=3 fail_timeout=10s;
} server {
listen 80;
server_name zpwechat.wang.com; access_log logs/zpwechat_access.log main;
error_log logs/zpwechat_error.log; location / {
proxy_pass http://zpwechat/;
proxy_next_upstream error timeout invalid_header http_500 http_502 http_503;
proxy_set_header Host $host;
proxy_set_header X-Real-IP $remote_addr;
proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
#proxy_set_header X-Forwarded-Proto https;
proxy_redirect off;
}
}
[root@nginx-web01 ~]# cat /data/nginx/conf/vhosts/zpimages.conf
upstream zpimages {
server 192.168.1.32:8082 max_fails=3 fail_timeout=10s;
} server {
listen 80;
server_name zpimages.wang.com; access_log logs/zpimages_access.log main;
error_log logs/zpimages_error.log; location / {
proxy_pass http://zpimages/;
proxy_next_upstream error timeout invalid_header http_500 http_502 http_503;
proxy_set_header Host $host;
proxy_set_header X-Real-IP $remote_addr;
proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
#proxy_set_header X-Forwarded-Proto https;
proxy_redirect off;
}
}
================LAPM中在php(5.6.15版本)连接mysql的配置=================
apache的站点根目录是/data/www，php测试连接mysql的测试配置如下：
[root@uatweb01 ~]# cat /data/www/test.php
<?php
$servername = "localhost:3306";
$username = "kevin";
$password = "123456";
$dbname = "kevin-test";
$conn = new mysqli($servername, $username, $password, $dbname);
if ($conn->connect_error) {
die("Connection failed: " . mysqli_connect_error());
}else{
echo "this is connected";
}
?>
访问该test.php文件，如果出现如下结果"this is connected"，这说明php连接mysql成功！如果出现"Connection failed"，则说明php连接mysql失败！
=============================系统后台登录, PHP报错============================
系统部署在了LAMP环境上, 访问系统后台, 点击登录没反应, F12查看报错:
ini_set() [function.ini-set]: A session is active. You cannot change the session module's ini settings at this time 根据报错提示涉及的文件是Session.php中的170行, 最后注释下面几行内容, 问题解决:
169 #if (isset($config['secure'])) {
170 # ini_set('session.cookie_secure', $config['secure']);
171 #}
172
173 #if (isset($config['httponly'])) {
174 # ini_set('session.cookie_httponly', $config['httponly']);
175 #} 解释:
上面两个是cookie安全的设置, 加了httponly 和 cookie_secure;
http only一般是用来防止js偷cookie;
cookie_secure设置之后只有https的请求才会生效. 前面通过Nginx upstream, 实现反向代理的负载均衡方式进行访问, 并利用nginx的ip_hash实现session共享.
下面是曾经线上使用过的一个LAMP配置(Mysql5.7+PHP7.2.3+Apahce2.4.7), http强转到https, 前面通过Nginx反向代理, 在此贴出来分享下:
1) 后端两台LAMP机器的apache配置如下(http强转到https)
[root@qw-web03 ~]# cat /usr/local/apache/conf/extra/veredholdings.conf
<VirtualHost *:80>
ServerName www.kevin.com
DocumentRoot /data/www/public
DirectoryIndex index.php index.html ErrorLog "/var/log/httpd/www.kevin.com-error_log"
CustomLog "/var/log/httpd/www.kevin.com-access_log" common </VirtualHost> [root@qw-web03 ~]# cat /usr/local/apache/conf/extra/httpd-ssl.conf
Listen 443
SSLCipherSuite HIGH:MEDIUM:!MD5:!RC4
SSLProxyCipherSuite HIGH:MEDIUM:!MD5:!RC4
SSLHonorCipherOrder on
SSLProtocol all -SSLv3
SSLProxyProtocol all -SSLv3
SSLPassPhraseDialog builtin
SSLSessionCache "shmcb:/usr/local/apache/logs/ssl_scache(512000)"
SSLSessionCacheTimeout 300 <VirtualHost *:443>
DocumentRoot "/data/www/public"
ServerName www.kevin.com
DirectoryIndex index.php index.html SSLEngine on
SSLCertificateFile "/usr/local/apache/conf/ssl/ssl.kevin.com.crt"
SSLCertificateKeyFile "/usr/local/apache/conf/ssl/ssl.kevin.com.key"
ErrorLog "logs/www.kevin.com-https-error_log"
CustomLog "logs/www.kevin.com-https-access_log" combined
</VirtualHost> [root@qw-web03 ~]# ll /usr/local/apache/conf/ssl/
total 8
-rw-rw-r-- 1 root root 4085 Apr 8 2018 ssl.kevin.com.crt
-rw-rw-r-- 1 root root 1706 Apr 8 2018 ssl.kevin.com.key [root@qw-web03 ~]# cat /usr/local/apache/conf/httpd.conf
Include conf/extra/httpd-ssl.conf
LoadModule php7_module modules/libphp7.so DocumentRoot "/data/www/public"
<Directory "/data/www/public">
Options FollowSymLinks MultiViews Includes
AllowOverride All
Require all granted
</Directory> [root@qw-web03 ~]# cat /data/www/public/.htaccess
<IfModule mod_rewrite.c>
Options +FollowSymlinks -Multiviews
RewriteEngine On RewriteCond %{SERVER_PORT} !^443$
RewriteRule ^.*$ https://%{SERVER_NAME}%{REQUEST_URI} [L,R] RewriteCond %{REQUEST_FILENAME} !-d
RewriteCond %{REQUEST_FILENAME} !-f
RewriteRule ^(.*)$ index.php/$1 [QSA,PT,L] RewriteEngine on
RewriteCond %{REQUEST_METHOD} ^(TRACE|TRACK)
RewriteRule .* - [F]
</IfModule> 解决:
前面几行是http强转到https的配置
后面三行是"关闭Apache服务器的TRACE请求, 或是禁止远端WWW服务支持TRACE请求", 安全配置 2) nginx反向代理配置(http强转到https)
[root@external-lb02 ~]# cat /data/nginx/conf/vhosts/www.kevin.com.conf
upstream web-80 {
server 10.0.32.62:80 max_fails=3 fail_timeout=15s;
server 10.0.32.63:80 max_fails=3 fail_timeout=15s;
} server {
listen 80;
server_name kevin.com;
return 301 http://www.kevin.com$request_uri;
} server {
listen 80;
server_name www.kevin.com; access_log /data/nginx/logs/www.kevin.com-access.log main;
error_log /data/nginx/logs/www.kevin.com-error.log; location / {
proxy_pass http://web-80;
proxy_set_header Host $host;
proxy_redirect http://web-80/ http://www.kevin.com/;
proxy_set_header X-Real-IP $remote_addr;
proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
proxy_next_upstream error timeout invalid_header http_502 http_503 http_504;
}
error_page 500 502 503 504 /50x.html;
location = /50x.html {
root html;
}
} [root@external-lb02 ~]# cat /data/nginx/conf/vhosts/443-www.kevin.com.conf
upstream web-443 {
ip_hash;
server 10.0.32.62:443 max_fails=3 fail_timeout=15s;
server 10.0.32.63:443 max_fails=3 fail_timeout=15s;
} server {
listen 443;
server_name www.kevin.com kevin.com; ssl on;
ssl_certificate /data/nginx/conf/ssl/ssl.kevin.com.crt;
ssl_certificate_key /data/nginx/conf/ssl/ssl.kevin.com.key;
ssl_protocols TLSv1 TLSv1.1 TLSv1.2;
ssl_session_cache shared:SSL:1m;
ssl_session_timeout 5m;
ssl_ciphers ECDHE-RSA-AES128-GCM-SHA256:ECDHE:ECDH:AES:HIGH:!NULL:!aNULL:!MD5:!ADH:!RC4:!DH:!DHE;
ssl_prefer_server_ciphers on; access_log /data/nginx/logs/www.kevin.com-access.log main;
error_log /data/nginx/logs/www.kevin.com-error.log; if ($host = "kevin.com") {
rewrite ^/(.*)$ https://www.kevin.com permanent;
} location / {
proxy_pass https://web-443;
proxy_set_header Host $host;
proxy_redirect https://web-443/ https://www.kevin.com/;
proxy_set_header X-Real-IP $remote_addr;
proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
proxy_next_upstream error timeout invalid_header http_502 http_503 http_504;
}
error_page 500 502 503 504 /50x.html;
location = /50x.html {
root html;
}
} [root@external-lb02 ~]# ll /data/nginx/conf/ssl/
总用量 36
-rw-r-xr-- 1 root root 4085 4月 8 2018 ssl.kevin.com.crt
-rw-r-xr-- 1 root root 1706 4月 8 2018 ssl.kevin.com.key
Centos6.8下编译安装LAMP的操作记录梳理的更多相关文章
- CentOS6.5下编译安装LAMP环境
LAMP(Linux-Apache-MySQL-PHP)网站架构是目前国际流行的Web框架.该框架能够满足大流量.大并发量的网站需求:当然.也可以直接使用高性能的服务器.高性能的负载均衡硬件以及CDN ...
- centos6.7下编译安装lamp环境
编译C源代码: 前提:提供开发工具及开发环境 通过“包组”提供开发组件,CentOS 6: "Development Tools", "Server Platform D ...
- centos6.7下编译安装lnmp
很多步骤不说明了,请参照本人的centos6.7下编译安装lamp,这次的架构是nginx+php-fpm一台服务器,mysql一台服务器 (1)首先编译安装nginx: 操作命令: yum -y g ...
- centos6.7下 编译安装MySQL5.7
centos6.7下编译安装MySQL5.7 准备工作 #-----依赖包及MySQL和boost安装包----- #yum包安装: shell> yum -y install gcc-c++ ...
- Linux(CentOS6.5)下编译安装PHP5.6.22时报错”configure: error: ZLIB extension requires gzgets in zlib”的解决方式(确定已经编译安装Zlib，并已经指定Zlib路径)
本文地址http://comexchan.cnblogs.com/,作者Comex Chan,尊重知识产权,转载请注明出处,谢谢! 今天在CentOS6.5下编译安装PHP时,一直报错 confi ...
- CentOS6.5_64bit下编译安装MySQL-5.6.23
转载请注明出处:http://blog.csdn.net/guoyjoe/article/details/44785511 ************************************** ...
- CentOS6.5下 yum安装LAMP
CentOS下yum安装LAMP 1. 用yum安装Apache,Mysql,PHP. 1.1安装Apache yum install httpd httpd-devel 安装完成后,用/etc/ ...
- CentOS6.9下升级默认的OpenSSH操作记录（升级到OpenSSH_7.6p1）
近期对IDC机房服务器做了一次安全漏洞扫描,漏扫结果显示服务器的OpenSSH版本太低(CentOS6默认是OpenSSH_5.3p1),存在漏洞隐患,安全部门建议升级到OpenSSH_7.6p1.升 ...
- Centos6.5下编译安装ACE6.0
ACE在Linux下的编译安装步骤(CentOS6.5 64Bit) Linux平台安装(CentOS6.5 64bit) 1, 下载ACE软件包,上传至Linux服务器(假设目录为/opt/ace, ...
随机推荐
- woff字体MIME类型配置
<system.webServer> <staticContent> <remove fileExtension=".woff" /> < ...
- sqlserver 拆分
有表tb, 如下:id value----------- -----------1 aa,bb2 aaa,bbb,ccc欲按id,分拆value列, 分拆后结果如下:id value--------- ...
- January 12th, 2018 Week 02nd Friday
Nothing behind me, everything ahead of me, as is ever so on the road. 我的身后空空荡荡,整个世界都在前方,这就是在路上. That ...
- Luogu P4707 重返现世
题目描述 为了打开返回现世的大门,Yopilla 需要制作开启大门的钥匙.Yopilla 所在的迷失大陆有 \(n\) 种原料,只需要集齐任意 \(k\) 种,就可以开始制作. Yopilla 来到了 ...
- ajax json 表格排序，分页，自己定义每页数量
ajax json 表格排序.分页,自己定义每页数量 点击表头能够排序.依照升序或者降序,另外支持多列排序 设置每页数量 演示 XML/HTML Code <table id='examp ...
- python随机生成6位数验证码
#随机生成6位数验证码 import randomcode = []for i in range(6): if i == str(random.randint(1,5)): cod ...
- 【数据库】事务，ACID，CAP和一致性
什么是事务 事务是指由一系列数据库操作组成的一个完整的逻辑过程,这个过程中的所有操作要么都成功,要么都不成功.比如:常见的例子就是银行转账的例子,一次转账操作会包含多个数据库操作,而这些数据库操作需要 ...
- nodejs中引用其他js文件中的函数
基本语句 require('js文件路径'); 使用方法 举个例子,在同一个目录下,有app.fun1.fun2三个js文件. 1. app.js var fun1 = require('./fun1 ...
- P1006 传纸条-洛谷luogu-dp动态规划
题目描述 小渊和小轩是好朋友也是同班同学,他们在一起总有谈不完的话题.一次素质拓展活动中,班上同学安排做成一个mm行nn列的矩阵,而小渊和小轩被安排在矩阵对角线的两端,因此,他们就无法直接交谈了.幸运 ...
- P2-Centos中安装vsftpd
1. 卸载已有版本 yum remove vsftpd 2. 安装 yum install -y vsftpd 3. 创建文件服务器根目录 mkdir /ftpfile 4. 创建ftp服务器用户 u ...