1.ETCD集群服务器：

（1）172.18.6.39

（2）172.18.6.40

（3）172.18.6.41

1.安装etcd

# yum -y install etcd

2.发布证书

cp -a /etc/kubernetes/ssl /etc/etcd/

3.添加配置文件

（1）节点[172.18.6.39]

# cat > /etc/etcd/etcd.conf <<EOF

#[Member]

#ETCD_CORS=""

ETCD_DATA_DIR="/opt/mfapps/etcd/data/default.etcd"

#ETCD_WAL_DIR=""

ETCD_LISTEN_PEER_URLS="https://0.0.0.0:2380"

ETCD_LISTEN_CLIENT_URLS="https://0.0.0.0:2379,https://0.0.0.0:4001"

#ETCD_MAX_SNAPSHOTS=""

#ETCD_MAX_WALS=""

ETCD_NAME="etcd01"

#ETCD_SNAPSHOT_COUNT=""

#ETCD_HEARTBEAT_INTERVAL=""

#ETCD_ELECTION_TIMEOUT=""

#ETCD_QUOTA_BACKEND_BYTES=""

#ETCD_MAX_REQUEST_BYTES=""

#ETCD_GRPC_KEEPALIVE_MIN_TIME="5s"

#ETCD_GRPC_KEEPALIVE_INTERVAL="2h0m0s"

#ETCD_GRPC_KEEPALIVE_TIMEOUT="20s"

#

[Clustering]

ETCD_INITIAL_ADVERTISE_PEER_URLS="https://0.0.0.0:2380"

ETCD_ADVERTISE_CLIENT_URLS="https://172.18.6.39:2379,https://172.18.6.39:4001"

#ETCD_DISCOVERY=""

#ETCD_DISCOVERY_FALLBACK="proxy"

#ETCD_DISCOVERY_PROXY=""

#ETCD_DISCOVERY_SRV=""

ETCD_INITIAL_CLUSTER="etcd01=https://172.18.6.39:2380,etcd02=https://172.18.6.40:2380,etcd03=https://172.18.6.41:2380"

ETCD_INITIAL_CLUSTER_TOKEN="etcd-cluster"

ETCD_INITIAL_CLUSTER_STATE="new"

#ETCD_STRICT_RECONFIG_CHECK="true"

#ETCD_ENABLE_V2="true"

#

#[Proxy]

#ETCD_PROXY="off"

#ETCD_PROXY_FAILURE_WAIT=""

#ETCD_PROXY_REFRESH_INTERVAL=""

#ETCD_PROXY_DIAL_TIMEOUT=""

#ETCD_PROXY_WRITE_TIMEOUT=""

#ETCD_PROXY_READ_TIMEOUT=""

#

[Security]

ETCD_CERT_FILE="/etc/etcd/ssl/server.pem"

ETCD_KEY_FILE="/etc/etcd/ssl/server-key.pem"

ETCD_CLIENT_CERT_AUTH="true"

ETCD_TRUSTED_CA_FILE="/etc/etcd/ssl/ca.pem"

ETCD_AUTO_TLS="true"

ETCD_PEER_CERT_FILE="/etc/etcd/ssl/server.pem"

ETCD_PEER_KEY_FILE="/etc/etcd/ssl/server-key.pem"

ETCD_PEER_CLIENT_CERT_AUTH="true"

ETCD_PEER_TRUSTED_CA_FILE="/etc/etcd/ssl/ca.pem"

ETCD_PEER_AUTO_TLS="true"

#

#[Logging]

ETCD_DEBUG="false"

#ETCD_LOG_PACKAGE_LEVELS=""

#ETCD_LOG_OUTPUT="default"

#

#[Unsafe]

#ETCD_FORCE_NEW_CLUSTER="false"

#

#[Version]

#ETCD_VERSION="false"

#ETCD_AUTO_COMPACTION_RETENTION=""

#

#[Profiling]

#ETCD_ENABLE_PPROF="false"

#ETCD_METRICS="basic"

#

#[Auth]

#ETCD_AUTH_TOKEN="simple"

EOF

（2）节点[172.18.6.40]

# cat > etcd.conf <<EOF

[Member]

#ETCD_CORS=""

ETCD_DATA_DIR="/opt/mfapps/etcd/data/default.etcd"

#ETCD_WAL_DIR=""

ETCD_LISTEN_PEER_URLS="https://0.0.0.0:2380"

ETCD_LISTEN_CLIENT_URLS="https://0.0.0.0:2379,https://0.0.0.0:4001"

#ETCD_MAX_SNAPSHOTS=""

#ETCD_MAX_WALS=""

ETCD_NAME="etcd02"

#ETCD_SNAPSHOT_COUNT=""

#ETCD_HEARTBEAT_INTERVAL=""

#ETCD_ELECTION_TIMEOUT=""

#ETCD_QUOTA_BACKEND_BYTES=""

#ETCD_MAX_REQUEST_BYTES=""

#ETCD_GRPC_KEEPALIVE_MIN_TIME="5s"

#ETCD_GRPC_KEEPALIVE_INTERVAL="2h0m0s"

#ETCD_GRPC_KEEPALIVE_TIMEOUT="20s"

#

[Clustering]

ETCD_INITIAL_ADVERTISE_PEER_URLS="https://0.0.0.0:2380"

ETCD_ADVERTISE_CLIENT_URLS="https://172.18.6.40:2379,https://172.18.6.40:4001"

#ETCD_DISCOVERY=""

#ETCD_DISCOVERY_FALLBACK="proxy"

#ETCD_DISCOVERY_PROXY=""

#ETCD_DISCOVERY_SRV=""

ETCD_INITIAL_CLUSTER="etcd01=https://172.18.6.39:2380,etcd02=https://172.18.6.40:2380,etcd03=https://172.18.6.41:2380"

ETCD_INITIAL_CLUSTER_TOKEN="etcd-cluster"

ETCD_INITIAL_CLUSTER_STATE="new"

#ETCD_STRICT_RECONFIG_CHECK="true"

#ETCD_ENABLE_V2="true"

#

#[Proxy]

#ETCD_PROXY="off"

#ETCD_PROXY_FAILURE_WAIT=""

#ETCD_PROXY_REFRESH_INTERVAL=""

#ETCD_PROXY_DIAL_TIMEOUT=""

#ETCD_PROXY_WRITE_TIMEOUT=""

#ETCD_PROXY_READ_TIMEOUT=""

#

[Security]

ETCD_CERT_FILE="/etc/etcd/ssl/server.pem"

ETCD_KEY_FILE="/etc/etcd/ssl/server-key.pem"

ETCD_CLIENT_CERT_AUTH="true"

ETCD_TRUSTED_CA_FILE="/etc/etcd/ssl/ca.pem"

ETCD_AUTO_TLS="true"

ETCD_PEER_CERT_FILE="/etc/etcd/ssl/server.pem"

ETCD_PEER_KEY_FILE="/etc/etcd/ssl/server-key.pem"

ETCD_PEER_CLIENT_CERT_AUTH="true"

ETCD_PEER_TRUSTED_CA_FILE="/etc/etcd/ssl/ca.pem"

ETCD_PEER_AUTO_TLS="true"

#

#[Logging]

#ETCD_DEBUG="false"

#ETCD_LOG_PACKAGE_LEVELS=""

#ETCD_LOG_OUTPUT="default"

#

#[Unsafe]

#ETCD_FORCE_NEW_CLUSTER="false"

#

#[Version]

#ETCD_VERSION="false"

#ETCD_AUTO_COMPACTION_RETENTION=""

#

#[Profiling]

#ETCD_ENABLE_PPROF="false"

#ETCD_METRICS="basic"

#

#[Auth]

#ETCD_AUTH_TOKEN="simple"

EOF

（3）节点[172.18.6.41]

# cat > etcd.conf <<EOF

[Member]

ETCD_CORS=""

ETCD_DATA_DIR="/opt/mfapps/etcd/data/default.etcd"

#ETCD_WAL_DIR=""

ETCD_LISTEN_PEER_URLS="https://0.0.0.0:2380"

ETCD_LISTEN_CLIENT_URLS="https://0.0.0.0:2379,https://0.0.0.0:4001"

#ETCD_MAX_SNAPSHOTS=""

#ETCD_MAX_WALS=""

ETCD_NAME="etcd03"

#ETCD_SNAPSHOT_COUNT=""

#ETCD_HEARTBEAT_INTERVAL=""

#ETCD_ELECTION_TIMEOUT=""

#ETCD_QUOTA_BACKEND_BYTES=""

#ETCD_MAX_REQUEST_BYTES=""

#ETCD_GRPC_KEEPALIVE_MIN_TIME="5s"

#ETCD_GRPC_KEEPALIVE_INTERVAL="2h0m0s"

#ETCD_GRPC_KEEPALIVE_TIMEOUT="20s"

#

[Clustering]

ETCD_INITIAL_ADVERTISE_PEER_URLS="https://0.0.0.0:2380"

ETCD_ADVERTISE_CLIENT_URLS="https://172.18.6.41:2379,https://172.18.6.41:4001"

#ETCD_DISCOVERY=""

#ETCD_DISCOVERY_FALLBACK="proxy"

#ETCD_DISCOVERY_PROXY=""

#ETCD_DISCOVERY_SRV=""

ETCD_INITIAL_CLUSTER="etcd01=https://172.18.6.39:2380,etcd02=https://172.18.6.40:2380,etcd03=https://172.18.6.41:2380"

ETCD_INITIAL_CLUSTER_TOKEN="etcd-cluster"

ETCD_INITIAL_CLUSTER_STATE="new"

#ETCD_STRICT_RECONFIG_CHECK="true"

#ETCD_ENABLE_V2="true"

#

#[Proxy]

#ETCD_PROXY="off"

#ETCD_PROXY_FAILURE_WAIT=""

#ETCD_PROXY_REFRESH_INTERVAL=""

#ETCD_PROXY_DIAL_TIMEOUT=""

#ETCD_PROXY_WRITE_TIMEOUT=""

#ETCD_PROXY_READ_TIMEOUT=""

#

[Security]

ETCD_CERT_FILE="/etc/etcd/ssl/server.pem"

ETCD_KEY_FILE="/etc/etcd/ssl/server-key.pem"

ETCD_CLIENT_CERT_AUTH="true"

ETCD_TRUSTED_CA_FILE="/etc/etcd/ssl/ca.pem"

ETCD_AUTO_TLS="true"

ETCD_PEER_CERT_FILE="/etc/etcd/ssl/server.pem"

ETCD_PEER_KEY_FILE="/etc/etcd/ssl/server-key.pem"

ETCD_PEER_CLIENT_CERT_AUTH="true"

ETCD_PEER_TRUSTED_CA_FILE="/etc/etcd/ssl/ca.pem"

ETCD_PEER_AUTO_TLS="true"

#

#[Logging]

ETCD_DEBUG="false"

#ETCD_LOG_PACKAGE_LEVELS=""

#ETCD_LOG_OUTPUT="default"

#

#[Unsafe]

#ETCD_FORCE_NEW_CLUSTER="false"

#

#[Version]

#ETCD_VERSION="false"

#ETCD_AUTO_COMPACTION_RETENTION=""

#

#[Profiling]

#ETCD_ENABLE_PPROF="false"

#ETCD_METRICS="basic"

#

#[Auth]

#ETCD_AUTH_TOKEN="simple"

EOF

3.启动服务

# systemctl start etcd

# systemctl enable etcd

4.查看etcd集群状态

# etcdctl   --ca-file=/etc/etcd/ssl/ca.pem   --cert-file=/etc/etcd/ssl/server.pem   --key-file=/etc/etcd/ssl/server-key.pem   --endpoints=https://172.18.6.39:2379,https://172.18.6.40:2379,https://172.18.6.41:2379   cluster-health

member 166097e900c8cd52 is healthy: got healthy result from https://172.18.6.41:2379

member afe1cb78e6e4ef23 is healthy: got healthy result from https://172.18.6.40:2379

member e61819fce46c79f2 is healthy: got healthy result from https://172.18.6.39:2379

cluster is healthy

二、Kubernetes_V1.10集群部署-master-etcd的更多相关文章

  1. 五、Kubernetes_V1.10集群部署-master-部署组件

    一.配置apiserver 1.生成启动文件 cat > /usr/lib/systemd/system/kube-apiserver.service <<EOF [Unit] De ...

  2. 四、Kubernetes_V1.10集群部署-master-创建kubeconfig

    1.生成配置文件 # 创建 TLS Bootstrapping Token # export BOOTSTRAP_TOKEN=$( /dev/urandom | od -An -t x | tr -d ...

  3. 六、Kubernetes_V1.10集群部署-node-部署节点组件

    一.配置kubelet 1.配置启动文件 # cat > /usr/lib/systemd/system/kubelet.service <<EOF [Unit] Descripti ...

  4. 三、Kubernetes_V1.10集群部署-master-部署flanne网络

    1. etcdctl --ca-file=/etc/etcd/ssl/ca.pem --cert-file=/etc/etcd/ssl/server.pem --key-file=/etc/etcd/ ...

  5. 一、Kubernetes_V1.10集群部署-master-生成证书

    一.证书生成 1.下载cfssl mkdir -p /etc/kubernetes/sslwget https://pkg.cfssl.org/R1.2/cfssl_linux-amd64 wget ...

  6. 【二】Kubernetes 集群部署-kubeadm方式（亲测）

    一.概述 本次部署 Kubernetes 集群是通过 kubeadm 工具来进行部署, kubeadm 是 Kubernetes 官⽅提供的⽤于快速部署 Kubernetes 集群的⼯具,利⽤其来部署 ...

  7. Kubernetes集群部署之三ETCD集群部署

    kuberntes 系统使用 etcd 存储所有数据,本文档介绍部署一个三节点高可用 etcd 集群的步骤,这三个节点复用 kubernetes 集群机器k8s-master.k8s-node-1.k ...

  8. openshift3.10集群部署

    简介 openshift是基于k8s的开源容器云. 要求 系统环境:CentOS 7.5 搭建一个master节点,两个node节点 注意: openshift3 依赖docker的版本为1.13.1 ...

  9. SPARK安装二：HADOOP集群部署

    一.hadoop下载 使用2.7.6版本,因为公司生产环境是这个版本 cd /opt wget http://mirrors.hust.edu.cn/apache/hadoop/common/hado ...

随机推荐

  1. python算数、逻辑运算，位运算

    算术运算符 对变量和数组进行算术运算. 算术运算符:+,-,*,/,% +:将连个或者多个数值相加 -:将两个数值相减 *:将两个数值相乘 /:将两个数值相除 %:取相除的余数 赋值运算符 将右边的值 ...

  2. DOM添加

    ㈠添加元素的步骤 ⑴创建空元素 ⑵设置关键属性 ⑶将元素添加到DOM树   ㈡创建空元素 var elem = document.createElement('table');   示例: var t ...

  3. PHP中变量声明和定义的区别

    先记录一下(不知道PHP是不是一样,但是C语言是这样的):把建立空间的声明称之为“定义”,而把不需要建立存储空间的声明称之为“声明”.声明的最终目的是为了提前使用,即在定义之前使用,如果不需要提前使用 ...

  4. luoguP3353 在你窗外闪耀的星星

    P3353 在你窗外闪耀的星星 题目描述 飞逝的的时光不会模糊我对你的记忆.难以相信从我第一次见到你以来已经过去了3年.我仍然还生动地记得,3年前,在美丽的集美中学,从我看到你微笑着走出教室,你将头向 ...

  5. Mybatis 结果映射下划线转驼峰

    mybatis 结果映射下划线转驼峰 Spring Boot 配置: #下划线转驼峰 mybatis.configuration.map-underscore-to-camel-case=true m ...

  6. Uep的ajaxform和ajaxgrid组件获取数据源

    对于ajaxform组件var record = ajaxform.getRecord();var storeId = record.get("storeId");var stor ...

  7. 两个 Activity 之间跳转时必然会执行的是哪几个方法？

    一般情况下比如说有两个 activity,分别叫 A,B,当在 A 里面激活 B 组件的时候, A 会调用 onPause()方法,然后 B 调用 onCreate() ,onStart(), onR ...

  8. Reactjs之实现js跳转路由

    1.新增知识 /* 实现js跳转路由:https://reacttraining.com/react-router/web/example/auth-workflow 1.要引入Redirect im ...

  9. 按需加载controller——angular

    一.多视图应用 AngularJS 通过路由支持多视图应用, 可以根据路由动态加载所需的视图.随着视图的不断增加, js文件会越来越多, 而 AngularJS 默认需要把全部的 js 都一次性加载, ...

  10. C#使用NPOI读写excel

    本帖内容来自网络+自己稍作整理,已找不到原贴,侵删 个人比较习惯用NPOI操作excel,方便易理解.在宇宙第一IDE(笑)——VS2017中插入NPOI就很方便: 首先安装NPOI: 然后在.cs文 ...