rsync错误日志
问题一:
@ERROR: chroot failed
rsync error: error starting client-server protocol (code 5) at main.c(1522) [receiver=3.0.3]
原因:
服务器端的目录不存在或无权限,创建目录并修正权限可解决问题。
问题二:
@ERROR: auth failed on module tee
rsync error: error starting client-server protocol (code 5) at main.c(1522) [receiver=3.0.3]
原因:
服务器端该模块(tee)需要验证用户名密码,但客户端没有提供正确的用户名密码,认证失败。
提供正确的用户名密码解决此问题。
问题三:
@ERROR: Unknown module ‘tee_nonexists'
rsync error: error starting client-server protocol (code 5) at main.c(1522) [receiver=3.0.3]
原因:
服务器不存在指定模块。提供正确的模块名或在服务器端修改成你要的模块以解决问题。
问题1:
在client上遇到问题:
rsync -auzv --progress --password-file=/etc/rsync.pas root@192.168.133.128::backup /home/
rsync: could not open password file "/etc/rsync.pas": No such file or directory (2)
Password:
@ERROR: auth failed on module backup
rsync error: error starting client-server protocol (code 5) at main.c(1506) [Receiver=3.0.7]
遇到这个问题:client端没有设置/etc/rsync.pas这个文件,而在使用rsync命令的时候,加了这个参数--
password-file=/etc/rsync.pas
问题2:
rsync -auzv --progress --password-file=/etc/rsync.pas root@192.168.133.128::backup /home/
@ERROR: auth failed on module backup
rsync error: error starting client-server protocol (code 5) at main.c(1506) [Receiver=3.0.7]
遇到这个问题:client端已经设置/etc/rsync.pas这个文件,里面也设置了密码111111,和服务器一致,但是
服务器段设置有错误,服务器端应该设置/etc/rsync.pas ,里面内容root:111111 ,这里登陆名不可缺少
问题3:
rsync -auzv --progress --password-file=/etc/rsync.pas root@192.168.133.128::backup /home/
@ERROR: chdir failed
rsync error: error starting client-server protocol (code 5) at main.c(1506) [Receiver=3.0.7]
遇到这个问题,是因为服务器端的/home/backup 其中backup这个目录并没有设置,所以提示:chdir failed
问题4:
rsync: write failed on "/home/backup2010/wensong": No space left on device (28)
rsync error: error in file IO (code 11) at receiver.c(302) [receiver=3.0.7]
rsync: connection unexpectedly closed (2721 bytes received so far) [generator]
rsync error: error in rsync protocol data stream (code 12) at io.c(601) [generator=3.0.7]
磁盘空间不够,所以无法操作。
可以通过df /home/backup2010 来查看可用空间和已用空间
问题5:网络收集问题
1、权限问题
类似如下的提示:rsync: opendir "/kexue" (in dtsChannel) failed: Permission denied (13)注意查看同步的目录权限是否为755
2、time out
rsync: failed to connect to 203.100.192.66: Connection timed out (110)
rsync error: error in socket IO (code 10) at clientserver.c(124) [receiver=3.0.5]
检查服务器的端口netstat –tunlp,远程telnet测试。
可能因为客户端或者服务端的防火墙开启 导致无法通信,可以设置规则放行 rsync(873端口) 或者直接关闭防火墙。
还有一种在同步过程中可能会提示没有权限 (将同步目录加上SvcwRsync全部权限即可,更简单的方法就是将SvcwRsync设为管理员即可)
3、服务未启动
rsync: failed to connect to 10.10.10.170: Connection refused (111)
rsync error: error in socket IO (code 10) at clientserver.c(124) [receiver=3.0.5]
启动服务:rsync --daemon --config=/etc/rsyncd.conf
4、磁盘空间满
rsync: recv_generator: mkdir "/teacherclubBackup/rsync……" failed: No space left on device (28)
*** Skipping any contents from this failed directory ***
5、Ctrl+C或者大量文件
rsync error: received SIGINT, SIGTERM, or SIGHUP (code 20) at rsync.c(544) [receiver=3.0.5]
rsync error: received SIGINT, SIGTERM, or SIGHUP (code 20) at rsync.c(544) [generator=3.0.5]
说明:导致此问题多半是服务端服务没有被正常启动,到服务器上去查查服务是否有启动,然后查看下 /var/run/rsync.pid 文件是否存在,最干脆的方法是杀死已经启动了服务,然后再次启动服务或者让脚本加入系统启动服务级别然后shutdown -r now服务器
6、xnetid启动
rsync: read error: Connection reset by peer (104)
rsync error: error in rsync protocol data stream (code 12) at io.c(759) [receiver=3.0.5]
查看rsync日志
rsync: unable to open configuration file "/etc/rsyncd.conf": No such file or directory
xnetid查找的配置文件位置默认是/etc下,根据具体情况创建软链接。例如:
ln -s /etc/rsyncd/rsyncd.conf /etc/rsyncd.conf
或者更改指定默认的配置文件路径,在/etc/xinetd.d/rsync配置文件中。
Rsync configure:
配置一:
ignore errors
说明:这个选项最好加上,否则再很多crontab的时候往往发生错误你也未可知,因为你不可能天天去看每时每刻去看log,不加上这个出现错误的几率相对会很高,因为任何大点的项目和系统,磁盘IO都是一个瓶颈
Rsync error:
错误一:
@ERROR: auth failed on module xxxxx
rsync: connection unexpectedly closed (90 bytes read so far)
rsync error: error in rsync protocol data stream (code 12) at io.c(150)
说明:这是因为密码设置错了,无法登入成功,检查一下rsync.pwd,看客服是否匹配。还有服务器端没启动rsync 服务也会出现这种情况。
错误二:
password file must not be other-accessible
continuing without password file
Password:
说明:这是因为rsyncd.pwd rsyncd.sec的权限不对,应该设置为600。如:chmod 600 rsyncd.pwd
错误三:
@ERROR: chroot failed
rsync: connection unexpectedly closed (75 bytes read so far)
rsync error: error in rsync protocol data stream (code 12) at io.c(150)
说明:这是因为你在 rsync.conf 中设置的 path 路径不存在,要新建目录才能开启同步
错误四:
rsync: failed to connect to 218.107.243.2: No route to host (113)
rsync error: error in socket IO (code 10) at clientserver.c(104) [receiver=2.6.9]
说明:防火墙问题导致,这个最好先彻底关闭防火墙,排错的基本法就是这样,无论是S还是C,还有ignore errors选项问题也会导致
错误五:
@ERROR: access denied to www from unknown (192.168.1.123)
rsync: connection unexpectedly closed (0 bytes received so far) [receiver]
rsync error: error in rsync protocol data stream (code 12) at io.c(359)
说明:此问题很明显,是配置选项host allow的问题,初学者喜欢一个允许段做成一个配置,然后模块又是同一个,致使导致
错误六:
rsync error: received SIGINT, SIGTERM, or SIGHUP (code 20) at rsync.c(244) [generator=2.6.9]
rsync error: received SIGUSR1 (code 19) at main.c(1182) [receiver=2.6.9]
说明:导致此问题多半是服务端服务没有被正常启动,到服务器上去查查服务是否有启动,然后查看下 /var/run/rsync.pid 文件是否存在,最干脆的方法是杀死已经启动了服务,然后再次启动服务或者让脚本加入系统启动服务级别然后shutdown -r now服务器
错误七:
rsync: read error: Connection reset by peer (104)
rsync error: error in rsync protocol data stream (code 12) at io.c(604) [sender=2.6.9]
说明:原数据目录里没有数据存在
rsync错误日志的更多相关文章
- centos shell编程6一些工作中实践脚本 nagios监控脚本 自定义zabbix脚本 mysql备份脚本 zabbix错误日志 直接送给bc做计算 gzip innobackupex/Xtrabackup 第四十节课
centos shell编程6一些工作中实践脚本 nagios监控脚本 自定义zabbix脚本 mysql备份脚本 zabbix错误日志 直接送给bc做计算 gzip innobacku ...
- Rsync,Linux日志及Screen工具介绍
第十六次课 Rsync,Linux日志及Screen工具介绍 目录 一.rsync工具介绍 二.rsync常用选项 三.rsync通过ssh同步 四. rsync通过服务同步 五.linux系统日志 ...
- 运维开发实践——基于Sentry搭建错误日志监控系统
错误日志监控也可称为业务逻辑监控, 旨在对业务系统运行过程中产生的错误日志进行收集归纳和监控告警.似乎有那么点曾相识?没错... 就是提到的“APM应用性能监控”.但它又与APM不同,APM系统主要注 ...
- rsync错误
rsync error:No route to host rsync服务端开启的iptables防火墙 [root@nfs01 tmp]# rsync -avz /etc/hosts rsync_ba ...
- 【夯实PHP基础】nginx php-fpm 输出php错误日志
本文地址 原文地址 分享提纲: 1.概述 2.解决办法(解决nginx下php-fpm不记录php错误日志) 1. 概述 nginx是一个web服务器,因此nginx的access日志只有对访问页面的 ...
- nginx php-fpm 输出php错误日志
nginx是一个web服务器,因此nginx的access日志只有对访问页面的记录,不会有php 的 error log信息. nginx把对php的请求发给php-fpm fastcgi进程来处理, ...
- SQL Server 错误日志过滤(ERRORLOG)
一.背景 有一天我发现SQL Server服务器的错误日志中包括非常多关于sa用户的登陆错误信息:“Login failed for user 'sa'. 原因: 评估密码时出错.[客户端: XX.X ...
- MySQL错误日志总结
MySQL错误日志是记录MySQL 运行过程中较为严重的警告和错误信息,以及MySQL每次启动和关闭的详细信息.错误日志的命名通常为hostname.err.其中,hostname表示服务器主机名. ...
- MS SQL 监控错误日志的告警信息
SQL Server的错误消息(Error Message)按照消息的严重级别一共划分25个等级,级别越高,表示严重性也越高.但是如果你统计sys.messages,你会发现,实际上只有16(SQL ...
随机推荐
- nyoj 91 阶乘之和(贪心)
阶乘之和 时间限制:3000 ms | 内存限制:65535 KB 难度:3 描述 给你一个非负数整数n,判断n是不是一些数(这些数不允许重复使用,且为正数)的阶乘之和,如9=1!+2!+3! ...
- button事件驱动
using System; using System.Collections.Generic; using System.ComponentModel; using System.Data; usin ...
- 【C语言入门教程】7.1 结构体类型变量的定义和引用
前面学习了变量和数组这些简单的数据结构,它们的特点是必须使用规定的数据类型.例如数组被定义为整型后,它的所有存储单元都是由整型构成.现实生活中某一类事物的共同属性可能是由不同的数据类型组成的集合,或者 ...
- springmvc之自定义注解(annotation)
参考:日志处理 三:Filter+自定义注解实现 系统日志跟踪功能 1.项目结构 2.pom.xml,添加需要依赖 <project xmlns="http://maven.apach ...
- CentOS 6.5 安装nginx 1.6.3
使用epel [root@nginx /]# wget -O /etc/yum.repos.d/epel.repo http://mirrors.aliyun.com/repo/epel-6.repo ...
- iOS开发——UI进阶篇(十一)应用沙盒,归档,解档,偏好设置,plist存储,NSData,自定义对象归档解档
1.iOS应用数据存储的常用方式XML属性列表(plist)归档Preference(偏好设置)NSKeyedArchiver归档(NSCoding)SQLite3 Core Data 2.应用沙盒每 ...
- ACCESS延时注入
这也算是个新知识吧.今天遇到个站,实实在在存在注入,但是弄不出字段.本应该可以用便宜注入.但是不知道为什么就是就是弄不出来. 大家如果有兴许可以加学习交流群:281245781 交流一下吧. Payl ...
- 浅谈VBA
VBA,全称Visual Basic for Applications,其中的一些专业性的解释可以自行搜索,这里就不一一介绍.半年以前,我是不知道VBA的,当我听到VBA的时候,我却迷糊了.VBA是什 ...
- php源码安全加密之PHP混淆算法.
php源码安全加密的前世今生,本想发在教程区中.不知道怎么发,就写在这里面吧.PHP加密,解密是一直的话题,本人菜鸟,今天就简单向大家介绍一下并说说其中原理.提供一些加密的混淆算法.一\PHP的加密总 ...
- hdu1054 树形dp&&二分图
B - Strategic Game Time Limit:10000MS Memory Limit:32768KB 64bit IO Format:%I64d & %I64u ...