Nginx的超时keeplive_timeout配置详解

https://blog.csdn.net/weixin_42350212/article/details/81123932
 

Nginx 处理的每个请求均有相应的超时设置。如果做好这些超时时间的限定,判定超时后资源被释放,用来处理其他的请求,以此提升 Nginx 的性能。

keepalive_timeout

HTTP 是一种无状态协议,客户端向服务器发送一个 TCP 请求,服务端响应完毕后断开连接。

如果客户端向服务器发送多个请求,每个请求都要建立各自独立的连接以传输数据。

HTTP 有一个 KeepAlive 模式,它告诉 webserver 在处理完一个请求后保持这个 TCP 连接的打开状态。若接收到来自客户端的其它请求,服务端会利用这个未被关闭的连接,而不需要再建立一个连接。

KeepAlive 在一段时间内保持打开状态,它们会在这段时间内占用资源。占用过多就会影响性能。

Nginx 使用 keepalive_timeout 来指定 KeepAlive 的超时时间(timeout)。指定每个 TCP 连接最多可以保持多长时间。Nginx 的默认值是 75 秒,有些浏览器最多只保持 60 秒,所以可以设定为 60 秒。若将它设置为 0,就禁止了 keepalive 连接。

1

2

# 配置段: http, server, location

keepalive_timeout 60s;

client_body_timeout

指定客户端与服务端建立连接后发送 request body 的超时时间。如果客户端在指定时间内没有发送任何内容,Nginx 返回 HTTP 408(Request Timed Out)。

1

2

# 配置段: http, server, location

client_body_timeout 20s;

client_header_timeout

客户端向服务端发送一个完整的 request header 的超时时间。如果客户端在指定时间内没有发送一个完整的 request header,Nginx 返回 HTTP 408(Request Timed Out)。

?

1

2

# 配置段: http, server, location

client_header_timeout 10s;

send_timeout

服务端向客户端传输数据的超时时间。

1

2

# 配置段: http, server, location

send_timeout 30s;

客户度连接nginx超时, 建议5s内

接收客户端header超时, 默认60s, 如果60s内没有收到完整的http包头, 返回408

1

2

3

4

5

6

Syntax: client_header_timeout time;

Default: 

client_header_timeout 60s;

Context:  http, server

Defines a timeout for reading client request header. If a client does not transmit the entire header within this time,

the 408 (Request Time-out) error is returned to the client.

接收客户端body超时, 默认60s, 如果连续的60s内没有收到客户端的1个字节, 返回408

1

2

3

4

5

6

7

Syntax: client_body_timeout time;

Default: 

client_body_timeout 60s;

Context:  http, server, location

Defines a timeout for reading client request body. The timeout is set only for a period between two successive read operations, not for the transmission of the whole request body.

If a client does not transmit anything within this time,

the 408 (Request Time-out) error is returned to the client.

keepalive时间,默认75s,通常keepalive_timeout应该比client_body_timeout大

1

2

3

4

5

6

Syntax: keepalive_timeout timeout [header_timeout];

Default: 

keepalive_timeout 75s;

Context:  http, server, location

The first parameter sets a timeout during which a keep-alive client connection will stay open on the server side. The zero value disables keep-alive client connections.

The optional second parameter sets a value in the “Keep-Alive: timeout=time” response header field. Two parameters may differ.

The “Keep-Alive: timeout=time” header field is recognized by Mozilla and Konqueror. MSIE closes keep-alive connections by itself in about 60 seconds.

可以理解为TCP连接关闭时的SO_LINGER延时设置,默认5s

1

2

3

4

5

6

7

Syntax: lingering_timeout time;

Default: 

lingering_timeout 5s;

Context:  http, server, location

When lingering_close is in effect, this directive specifies the maximum waiting time for more client data to arrive. If data are not received during this time,

the connection is closed. Otherwise, the data are read and ignored, and nginx starts waiting for more data again.

The “wait-read-ignore” cycle is repeated, but no longer than specified by the lingering_time directive.

域名解析超时,默认30s

1

2

3

4

5

6

Syntax: resolver_timeout time;

Default: 

resolver_timeout 30s;

Context:  http, server, location

Sets a timeout for name resolution, for example:

resolver_timeout 5s;

发送数据至客户端超时, 默认60s, 如果连续的60s内客户端没有收到1个字节, 连接关闭

1

2

3

4

5

6

Syntax: send_timeout time;

Default: 

send_timeout 60s;

Context:  http, server, location

Sets a timeout for transmitting a response to the client. The timeout is set only between two successive write operations,

not for the transmission of the whole response. If the client does not receive anything within this time, the connection is closed.

nginx与upstream server的连接超时时间

1

2

3

4

5

Syntax: proxy_connect_timeout time;

Default: 

proxy_connect_timeout 60s;

Context:  http, server, location

Defines a timeout for establishing a connection with a proxied server. It should be noted that this timeout cannot usually exceed 75 seconds.

nginx接收upstream server数据超时, 默认60s, 如果连续的60s内没有收到1个字节, 连接关闭

1

2

3

4

5

6

Syntax: proxy_read_timeout time;

Default: 

proxy_read_timeout 60s;

Context:  http, server, location

Defines a timeout for reading a response from the proxied server. The timeout is set only between two successive read operations,

not for the transmission of the whole response. If the proxied server does not transmit anything within this time, the connection is closed.

nginx发送数据至upstream server超时, 默认60s, 如果连续的60s内没有发送1个字节, 连接关闭

1

2

3

4

5

6

Syntax: proxy_send_timeout time;

Default: 

proxy_send_timeout 60s;

Context:  http, server, location

Sets a timeout for transmitting a request to the proxied server. The timeout is set only between two successive write operations,

not for the transmission of the whole request. If the proxied server does not receive anything within this time, the connection is closed.

[转帖]Nginx的超时keeplive_timeout配置详解的更多相关文章

  1. 转:Nginx的超时keeplive_timeout配置详解

    https://blog.csdn.net/weixin_42350212/article/details/81123932 Nginx 处理的每个请求均有相应的超时设置.如果做好这些超时时间的限定, ...

  2. Nginx的超时timeout配置详解

    Nginx的超时timeout配置详解 本文介绍 Nginx 的 超时(timeout)配置. Nginx 处理的每个请求均有相应的超时设置.如果做好这些超时时间的限定,判定超时后资源被释放,用来处理 ...

  3. Nginx + Tomcat 负载均衡配置详解

    Nginx常用操作指南一.Nginx 与 Tomcat 安装.配置及优化1. 检查和安装依赖项 yum -y install gcc pcre pcre-devel zlib zlib-devel o ...

  4. nginx安装升级及配置详解

    1.简介 2.安装配置 3.配置文件介绍 4.启动.停止.平滑重启.升级 一.Nginx简介 Nginx(engine x)是俄罗斯人Igor Sysoev编写的一款高性能的http和反向代理服务器. ...

  5. 学习计划 nginx 中 php的配置详解

    本章只看一个刚下载的nginx是如何支持php的 -- location ~ \.php$ { root html; fastcgi_pass 127.0.0.1:9000; fastcgi_inde ...

  6. nginx 源码安装配置详解(./configure)

    在"./configure"配置中,"--with"表示启用模块,也就是说这些模块在编译时不会自动构建,"--without"表示禁用模块, ...

  7. Nginx实现跨域配置详解

    主要给大家介绍了关于Nginx跨域使用字体文件的相关内容,分享出来供大家参考学习,下面来一起看看详细的介绍: 问题描述 今天在使用子域名访问根域名的CSS时,发现字体无法显示,在确保CSS和Font字 ...

  8. nginx在linux上的安装与配置详解(一)

    Nginx的安装与配置详解 (1)nginx简介     nginx概念: Nginx是一款轻量级的Web 服务器/反向代理服务器及电子邮件(IMAP/POP3)代理服务器,并在一个BSD-like ...

  9. [转帖]Nginx安装及配置详解 From https://www.cnblogs.com/zhouxinfei/p/7862285.html

    Nginx安装及配置详解   nginx概述 nginx是一款自由的.开源的.高性能的HTTP服务器和反向代理服务器:同时也是一个IMAP.POP3.SMTP代理服务器:nginx可以作为一个HTTP ...

随机推荐

  1. Http接口安全整理

    1.Http接口安全概述: 1.1.Http接口是互联网各系统之间对接的重要方式之一,使用http接口,开发和调用都很方便,也是被大量采用的方式,它可以让不同系统之间实现数据的交换和共享,但由于htt ...

  2. 第一行代码 -3-2 软件也要拼脸蛋-UI界面-更强大的滚动条-RecyclerView

    简述教程:https://www.jianshu.com/p/4fc6164e4709 一 基础准备 1 添加RecyclerView控件引用库文件 2 总布局添加RecyclerView控件 3 R ...

  3. day15 Python风湿理论之函数即变量

    eg1.定义foo门牌号,调用foo函数,打印,再找bar门牌号,找不到,报错 def foo(): print('from foo') bar() foo() 结果:报错 from foo Trac ...

  4. Jmeter之tomcat性能测试+性能改进措施

    Jmeter用于tomcat性能测试,因为项目部署在tomcat,正常情况下,一个tomcat可以承受500个并发,通过修改配置,及其相关的tomcat优化,可以承受到1000个并发. 如何测试tom ...

  5. Vue2 第二天学习

    个人小总结:1年多没有写博客,感觉很多知识点生疏了,虽然工作上能解决问题,但是当别人问到某个知识点的时候,还是迷迷糊糊的,所以坚持写博客是硬道理的,因为大脑不可能把所有的知识点记住,有可能某一天忘了, ...

  6. java 学习------JDK1.8安装与配置

    1.下在JDK 1.8 2.解压安装 (一般选择默认路径安装) 3.配置环境变量     (我的电脑是windows10 系统) (1)计算机→属性→高级系统设置→高级→环境变量 (2)添加 JAVA ...

  7. Tensorflow-hub[例子解析2]

    接Tensorflow-hub[例子解析1]. 3 基于文本词向量的例子 3.1 创建Module 可以从Tensorflow-hub[例子解析1].中看出,hub相对之前减少了更多的工作量. 首先, ...

  8. excel保存为制表符分隔的文本文件 js无法完整读取

    excel保存为制表符分隔的文本文件 js无法完整读取 excel另存为文本有两个选项,一个是制表符分隔的文本文件,一个是unicode文本.生成的文件Unicode更大一些.但是这里需要注意的是[制 ...

  9. sql语句 update

    UPDATE ban_group AS A SET  NAME ='锅炉三班' FROM     hr_employee AS b  WHERE     b.job_no = '1394' AND A ...

  10. ORA-00020:maximum number of processes (150) exceeded

    异常的含义 超过最大的进程数 我们使用下面的语句可以查看与进程(process)的相关参数: 如上所示,这里的最大进程数是150. 问题可能存在的原因 1.应用程序在使用数据库连接池时,使用完成后没有 ...