[root@venn09 ~]# yum install -y vim
Loaded plugins: fastestmirror
Could not retrieve mirrorlist http://mirrorlist.centos.org/?release=7&arch=x86_64&repo=os&infra=stock error was
14: curl#6 - "Could not resolve host: mirrorlist.centos.org; Unknown error"
One of the configured repositories failed (Unknown),
and yum doesn't have enough cached data to continue. At this point the only
safe thing yum can do is fail. There are a few ways to work "fix" this: . Contact the upstream for the repository and get them to fix the problem. . Reconfigure the baseurl/etc. for the repository, to point to a working
upstream. This is most often useful if you are using a newer
distribution release than is supported by the repository (and the
packages for the previous distribution release still work). . Run the command with the repository temporarily disabled
yum --disablerepo=<repoid> ... . Disable the repository permanently, so yum won't use it by default. Yum
will then just ignore the repository until you permanently enable it
again or use --enablerepo for temporary usage: yum-config-manager --disable <repoid>
or
subscription-manager repos --disable=<repoid> . Configure the failing repository to be skipped, if it is unavailable.
Note that yum will try to contact the repo. when it runs most commands,
so will have to try and fail each time (and thus. yum will be be much
slower). If it is a very temporary problem though, this is often a nice
compromise: yum-config-manager --save --setopt=<repoid>.skip_if_unavailable=true Cannot find a valid baseurl for repo: base//x86_64

找不到DNS服务器。

解决办法:

  配置/etc/resolv.conf

加入如下内容:

nameserver 8.8.8.8  #google 提供的dns服务器
nameserver 8.8.4.4 #google 提供的dns服务器

重新执行。搞定

yum 安装报错:Could not retrieve mirrorlist http://mirrorlist.centos.org/?release=7&arch=x86_64&repo=os&infra=stock error was 14: curl#6 - "Could not resolve host: mirrorlist.centos.org; Unknown error"的更多相关文章

  1. Bug Could not retrieve mirrorlist http://mirrorlist.centos.org/?release=7&arch=x86_64&repo=os&infra=stock error was

    yum -y install gcc 时候报bug: Could not retrieve mirrorlist http://mirrorlist.centos.org/?release=7& ...

  2. Linux安装yum install gcc-c++出错:Could not retrieve mirrorlist http://mirrorlist.centos.org/?release=7&arch=x86_64&repo=os&infra=stock error was 14: curl#6 - "Could not resolve host: mirrorlist.centos...

    错误如图: 解决办法: 1.修改配置文件 /etc/resolv.conf,该配置文件如下: 2.输入:gedit resolv.conf,修改配置文件内容如下: 3.然后重启: 4.重新进行安装: ...

  3. Could not retrieve mirrorlist http://mirrorlist.centos.org/?release=7&arch=x86_64&repo=os&infra=stoc

    今天在使用yum安装文件时,出现了以下问题: root@localhost opt]# yum update Loaded plugins: fastestmirror Could not retri ...

  4. CentOS报错:Could not retrieve mirrorlist http://mirrorlist.centos.org/?release=7&arch=x86_64&repo=os&infra=stock32 error was 14: curl#6 - "Could not resolve host: mirrorlist.centos.org; Unknown error"

    今天安装完带图形界面的CentOS 7后,在Terminal中运行yum安装命令时报了以下错误: Could not retrieve mirrorlist http://mirrorlist.cen ...

  5. Could not retrieve mirrorlist http://mirrorlist.centos.org/?release=7&arch=x86_64&repo=os&infra=stock32 error was 14: curl#6 - "Could not resolve host: mirrorlist.centos.org; Unknown error"

     今天安装完带图形界面的CentOS 7后,在Terminal中运行yum安装命令时报了以下错误: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 ...

  6. 14: curl#6 - "Could not resolve host: mirrorlist.centos.org; 未知的错误"

    14: curl#6 - "Could not resolve host: mirrorlist.centos.org; 未知的错误" One of the configured ...

  7. curl: (6) Could not resolve host: mirrors.163.com; Unknown error 服务器上解析不了域名,换成ip可以

    原因是DNS域名解析问题: 添加nameserver即可解决 echo nameserver 8.8.8.8 > /etc/resolv.conf 解释一下DNS服务 DNS(Domain Na ...

  8. yum安装软件报错:curl#6 - "Could not resolve host: mirrorlist.centos.org; Temporary failure in name resolut

    # yum install -y epel-release Loaded plugins: fastestmirror Repository base is listed more than once ...

  9. linux -小记(2)问题:yum 安装报错"Another app is currently holding the yum lock; waiting for it to exit... ...: yum Memory : 26 M RSS (868 MB VSZ) Started: Wed Oct 26 22:48:24 2016 - 0"

    yum 安装报错 "Another app is currently holding the yum lock; waiting for it to exit... The other ap ...

随机推荐

  1. Maven 标签

    scope 1.compile:默认值 他表示被依赖项目需要参与当前项目的编译,还有后续的测试,运行周期也参与其中,是一个比较强的依赖.打包的时候通常需要包含进去 2.test:依赖项目仅仅参与测试相 ...

  2. jsp页面之初体验

    最近在学jsp 在web.xml页面中学到了如何让一个页面第一个启动

  3. windows phpstudy如何扩展MongoDB

    phpstudy如何扩展MongoDB 作者: default|标签:phpstudy MongoDB PHP|2017-9-9 10:17 phpstudy扩展MongoDB 前置工作安装PHPst ...

  4. FZU 2277 Change(dfs序+树状数组)

    Problem Description There is a rooted tree with n nodes, number from 1-n. Root’s number is 1.Each no ...

  5. windows 2012安装不了KB2919355

    直接安装KB2919355会报错 “此更新不适用于你的计算机” 此时应先安装 KB2919442 https://www.microsoft.com/zh-cn/download/confirmati ...

  6. Bundle Adjustment---即最小化重投影误差(高翔slam---第七讲)

    一.历史由来 Adjustment computation最早是由geodesy的人搞出来的.19世纪中期的时候,geodetics的学者就开始研究large scale triangulations ...

  7. golang xml和json的解析与生成

    golang中解析xml时我们通常会创建与之对应的结构体,一层层嵌套,完成复杂的xml解析. package main; import ( "encoding/xml" " ...

  8. Eclipse中logcat过滤器的使用

    logcat里信息繁多,用过滤器可以方便快捷的找到我们要查找的信息. 我们可以在打开Eclipse之后,选择Window –> Show View ->Other菜单,然后在Android ...

  9. Andriod ----配置环境变量

    注意:跟java相关的目录不要有中文和空格. 1.打开我的电脑--属性--高级--环境变量 2.新建系统变量JAVA_HOME 和CLASSPATH 变量名:JAVA_HOME 变量值:D:\Java ...

  10. 01. pt-align

    01. pt-align pt-align xxx.txt =========================================== pt-align对齐输出格式 name city a ...