Huawei-R&S-网络工程师实验笔记20190609-VLAN划分综合（Access和Trunk端口）

》Huawei-R&S-网络工程师实验笔记20190609-VLAN划分综合（Access和Trunk端口）

》》实验开始，先上拓扑图参考：

》》》实验目标：将交换机连接主机的端口类型配置为Access端口，并划分到对应的VLAN中；将交换机互联端口配置为Trunk端口，并允许通过vlan10和vlan20.

[SWA]vlan batch        //批处理创建vlan10和vlan20
Info: This operation may take a few seconds. Please wait for a moment...done.
[SWA]
Jun    ::-: SWA DS//DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.
.191.3. configurations have been changed. The current change number is , the c
hange loop count is , and the maximum number of records is .

[SWA]int g0//
[SWA-GigabitEthernet0//]port link-type access      //配置端口G0/0/2的类型为Access端口
[SWA-GigabitEthernet0//]
Jun    ::-: SWA DS//DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.
.191.3. configurations have been changed. The current change number is , the c
hange loop count is , and the maximum number of records is .
[SWA-GigabitEthernet0//]port default vlan       //将端口G0/0/2加入vlan10
[SWA-GigabitEthernet0//]
Jun    ::-: SWA DS//DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.
.191.3. configurations have been changed. The current change number is , the c
hange loop count is , and the maximum number of records is .

[SWA-GigabitEthernet0//]int g0//
[SWA-GigabitEthernet0//]port link-type access      //配置端口G0/0/3的类型为Access端口
[SWA-GigabitEthernet0//]
Jun    ::-: SWA DS//DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.
.191.3. configurations have been changed. The current change number is , the c
hange loop count is , and the maximum number of records is .
[SWA-GigabitEthernet0//]port default vlan       //将端口G0/0/3加入vlan20
[SWA-GigabitEthernet0//]
Jun    ::-: SWA DS//DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.
.191.3. configurations have been changed. The current change number is , the c
hange loop count is , and the maximum number of records is .
[SWA-GigabitEthernet0//]q

[SWA]int g0//
[SWA-GigabitEthernet0//]port link-type trunk      //配置端口G0/0/1的类型为Trunk端口
[SWA-GigabitEthernet0//]
Jun    ::-: SWA DS//DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.
.191.3. configurations have been changed. The current change number is , the c
hange loop count is , and the maximum number of records is .
[SWA-GigabitEthernet0//]port trunk allow-pass vlan        //配置G0/0/1(Trunk端口)允许vlan10和vlan20通过
[SWA-GigabitEthernet0//]
Jun    ::-: SWA DS//DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.
.191.3. configurations have been changed. The current change number is , the c
hange loop count is , and the maximum number of records is .
[SWA-GigabitEthernet0//]q

[SWA]dis vlan      //查看vlan的配置情况
The total number of vlans is :
--------------------------------------------------------------------------------
U: Up;         D: Down;         TG: Tagged;         UT: Untagged;
MP: Vlan-mapping;               ST: Vlan-stacking;
#: ProtocolTransparent-vlan;    *: Management-vlan;
--------------------------------------------------------------------------------
VID  Type    Ports
--------------------------------------------------------------------------------
    common  UT:GE0//(U)      GE0//(D)      GE0//(D)      GE0//(D)
                GE0//(D)      GE0//(D)      GE0//(D)      GE0//(D)
                GE0//(D)     GE0//(D)     GE0//(D)     GE0//(D)
                GE0//(D)     GE0//(D)     GE0//(D)     GE0//(D)
                GE0//(D)     GE0//(D)     GE0//(D)     GE0//(D)
                GE0//(D)     GE0//(D)                                     

   common  UT:GE0//(U)                                                      

             TG:GE0//(U)                                                      

   common  UT:GE0//(U)                                                      

             TG:GE0//(U)                                                      

VID  Status  Property      MAC-LRN Statistics Description
--------------------------------------------------------------------------------
    enable  default       enable  disable    VLAN
   enable  default       enable  disable    VLAN
   enable  default       enable  disable    VLAN                          

[SWA]dis port vlan active      //查看vlan端口激活情况
T=TAG U=UNTAG
-------------------------------------------------------------------------------
Port                Link Type    PVID    VLAN List
-------------------------------------------------------------------------------
GE0//             trunk               U:         //Trunk端口 Untagged vlan1
                                         T:      //Trunk端口 Tagged vlan10 vlan20
GE0//             access             U:        //Access端口 Untagged vlan10
GE0//             access             U:        //Access端口 Untagged vlan20
GE0//             hybrid              U:
GE0//             hybrid              U:
GE0//             hybrid              U:
GE0//             hybrid              U:
  ---- More ----

[SWB]vlan batch 10 20          //在SWB上以此进行类似SWA的配置

[SWB]int g0/0/2
[SWB-GigabitEthernet0/0/2]port link-type access
[SWB-GigabitEthernet0/0/2]port default vlan 20

[SWB-GigabitEthernet0/0/2]int g0/0/3
[SWB-GigabitEthernet0/0/3]port link-type access
[SWB-GigabitEthernet0/0/3]port default vlan 10

[SWB-GigabitEthernet0/0/3]int g0/0/1
[SWB-GigabitEthernet0/0/1]port link-type trunk
[SWB-GigabitEthernet0/0/1]port trunk allow-pass vlan 10 20
[SWB-GigabitEthernet0/0/1]q

[SWB]dis vlan

[SWB]dis port vlan active

》》》》配置完成后，ping测试同一vlan内主机互通情况，主机A ping 主机D、主机B ping 主机C 的测试结果如下图：