Given two words (beginWord and endWord), and a dictionary's word list, find all shortest transformation sequence(s) from beginWord to endWord, such that:

  1. Only one letter can be changed at a time
  2. Each transformed word must exist in the word list. Note that beginWord is not a transformed word.

Note:

  • Return an empty list if there is no such transformation sequence.
  • All words have the same length.
  • All words contain only lowercase alphabetic characters.
  • You may assume no duplicates in the word list.
  • You may assume beginWord and endWord are non-empty and are not the same.

Example 1:

Input:
beginWord = "hit",
endWord = "cog",
wordList = ["hot","dot","dog","lot","log","cog"] Output:
[
["hit","hot","dot","dog","cog"],
  ["hit","hot","lot","log","cog"]
]

Example 2:

Input:
beginWord = "hit"
endWord = "cog"
wordList = ["hot","dot","dog","lot","log"] Output: [] Explanation: The endWord "cog" is not in wordList, therefore no possible transformation.

个人感觉这道题是相当有难度的一道题,它比之前那道 Word Ladder 要复杂很多,全场第四低的通过率 12.9% 正说明了这道题的难度,博主也是研究了网上别人的解法很久才看懂,然后照葫芦画瓢的写了出来,下面这种解法的核心思想是 BFS,大概思路如下:目的是找出所有的路径,这里建立一个路径集 paths,用以保存所有路径,然后是起始路径p,在p中先把起始单词放进去。然后定义两个整型变量 level,和 minLevel,其中 level 是记录循环中当前路径的长度,minLevel 是记录最短路径的长度,这样的好处是,如果某条路径的长度超过了已有的最短路径的长度,那么舍弃,这样会提高运行速度,相当于一种剪枝。还要定义一个 HashSet 变量 words,用来记录已经循环过的路径中的词,然后就是 BFS 的核心了,循环路径集 paths 里的内容,取出队首路径,如果该路径长度大于 level,说明字典中的有些词已经存入路径了,如果在路径中重复出现,则肯定不是最短路径,所以需要在字典中将这些词删去,然后将 words 清空,对循环对剪枝处理。然后取出当前路径的最后一个词,对每个字母进行替换并在字典中查找是否存在替换后的新词,这个过程在之前那道 Word Ladder 里面也有。如果替换后的新词在字典中存在,将其加入 words 中,并在原有路径的基础上加上这个新词生成一条新路径,如果这个新词就是结束词,则此新路径为一条完整的路径,加入结果中,并更新 minLevel,若不是结束词,则将新路径加入路径集中继续循环。写了这么多,不知道你看晕了没有,还是看代码吧,这个最有效:

class Solution {
public:
vector<vector<string>> findLadders(string beginWord, string endWord, vector<string>& wordList) {
vector<vector<string>> res;
unordered_set<string> dict(wordList.begin(), wordList.end());
vector<string> p{beginWord};
queue<vector<string>> paths;
paths.push(p);
int level = , minLevel = INT_MAX;
unordered_set<string> words;
while (!paths.empty()) {
auto t = paths.front(); paths.pop();
if (t.size() > level) {
for (string w : words) dict.erase(w);
words.clear();
level = t.size();
if (level > minLevel) break;
}
string last = t.back();
for (int i = ; i < last.size(); ++i) {
string newLast = last;
for (char ch = 'a'; ch <= 'z'; ++ch) {
newLast[i] = ch;
if (!dict.count(newLast)) continue;
words.insert(newLast);
vector<string> nextPath = t;
nextPath.push_back(newLast);
if (newLast == endWord) {
res.push_back(nextPath);
minLevel = level;
} else paths.push(nextPath);
}
}
}
return res;
}
};

Github 同步地址:

https://github.com/grandyang/leetcode/issues/126

类似题目:

Word Ladder

参考资料:

https://leetcode.com/problems/word-ladder-ii/

http://yucoding.blogspot.com/2014/01/leetcode-question-word-ladder-ii.html

https://leetcode.com/problems/word-ladder-ii/discuss/40487/Java-Solution-with-Iteration

LeetCode All in One 题目讲解汇总(持续更新中...)

[LeetCode] Word Ladder II 词语阶梯之二的更多相关文章

  1. [LeetCode] 126. Word Ladder II 词语阶梯之二

    Given two words (beginWord and endWord), and a dictionary's word list, find all shortest transformat ...

  2. [LeetCode] 126. Word Ladder II 词语阶梯 II

    Given two words (beginWord and endWord), and a dictionary's word list, find all shortest transformat ...

  3. [LeetCode] Word Pattern II 词语模式之二

    Given a pattern and a string str, find if str follows the same pattern. Here follow means a full mat ...

  4. [LeetCode] Word Search II 词语搜索之二

    Given a 2D board and a list of words from the dictionary, find all words in the board. Each word mus ...

  5. [leetcode]Word Ladder II @ Python

    [leetcode]Word Ladder II @ Python 原题地址:http://oj.leetcode.com/problems/word-ladder-ii/ 参考文献:http://b ...

  6. LeetCode :Word Ladder II My Solution

    Word Ladder II Total Accepted: 11755 Total Submissions: 102776My Submissions Given two words (start  ...

  7. LeetCode: Word Ladder II 解题报告

    Word Ladder II Given two words (start and end), and a dictionary, find all shortest transformation s ...

  8. LeetCode: Word Ladder II [127]

    [题目] Given two words (start and end), and a dictionary, find all shortest transformation sequence(s) ...

  9. [LeetCode] 212. Word Search II 词语搜索之二

    Given a 2D board and a list of words from the dictionary, find all words in the board. Each word mus ...

随机推荐

  1. 利用Python进行数据分析(7) pandas基础: Series和DataFrame的简单介绍

    一.pandas 是什么 pandas 是基于 NumPy 的一个 Python 数据分析包,主要目的是为了数据分析.它提供了大量高级的数据结构和对数据处理的方法. pandas 有两个主要的数据结构 ...

  2. UEditor百度富文本编辑器--让编辑器自适应宽度的解决方案

    UEditor百度富文本编辑器的initialFrameWidth属性,默认值是1000. 不能够自适应屏幕宽度.如图1: 刚开始的时候,我是直接设置initialFrameWidth=null的.效 ...

  3. 数据结构:栈 顺序表方法和单链表方法(python版)

    #!/usr/bin/env python # -*- coding:utf-8 -*- class StackUnderflow(ValueError): pass #链表节点 class Node ...

  4. MySQL时间分组查询

    表TESTER 字段:id -- INT    date  -- TIMESTAMP 1.如何按年.月.日分组查询? select DATE_FORMAT(date,'%Y-%m-%d') time, ...

  5. python之最强王者(5)——Nunber(数字)

    1.Python Number(数字) Python Number 数据类型用于存储数值. 数据类型是不允许改变的,这就意味着如果改变 Number 数据类型的值,将重新分配内存空间. 以下实例在变量 ...

  6. Angular的自定义指令以及实例

    本文章已收录于:  AngularJS知识库  分类: javascript(55)  http://www.cnblogs.com/xiaoxie53/p/5058198.html   前面的文章介 ...

  7. SharePoint 2010 数据库xxx的事务日志已满

    接到领导安排,说客户有问题 请求协助解决,对方给我展示的错误日志,如下: 数据库'WSS_Content_xxxx'的事务日志已满.若要查明无法重用日志中的空间的原因,请参阅sy.databases中 ...

  8. 在Outlook中查看预览SharePoint文档库的文档

    本文概况 阅读时间: 约2分钟 适用版本:SharePoint Server 2010及以上 面向用户:普通用户,管理员 难度指数:★★☆☆☆ 在日常工作中,总有一些常用的文档需要经常打开查看,其实我 ...

  9. Vector Tile

    Mapbox Vector Tile Specification A specification for encoding tiled vector data. <?XML:NAMESPACE ...

  10. Critical: Update Your Windows Secure Channel (cve-2014-6321,MS14-066)

    前言:风雨欲来山满楼,下半年开始各种凶猛的漏洞层出不穷,天下已经不太平,互联网已经进入一个新的台阶 0x01 cve-2014-6321 11月的补丁月,微软请windows的用户吃了顿大餐,发布了1 ...