luo@luo-ThinkPad-W540:~$

luo@luo-ThinkPad-W540:~$

luo@luo-ThinkPad-W540:~$

luo@luo-ThinkPad-W540:~$ sudo apt install libreadline-dev
Reading package lists... Error!
E: Encountered a section with no Package: header
E: Problem with MergeList /var/lib/apt/lists/ppa.launchpad.net_fcitx-team_nightly_ubuntu_dists_xenial_main_binary-amd64_Packages
E: The package lists or status file could not be parsed or opened.

luo@luo-ThinkPad-W540:~$

luo@luo-ThinkPad-W540:~$

luo@luo-ThinkPad-W540:~$

------------------------------------------------

sudo rm /var/lib/apt/lists/* -vf

sudo apt-get update

------------------------------------------------

luo@luo-ThinkPad-W540:~$
luo@luo-ThinkPad-W540:~$
luo@luo-ThinkPad-W540:~$ sudo apt-get install libreadline-dev
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following package was automatically installed and is no longer required:
libllvm4.0
Use 'sudo apt autoremove' to remove it.
The following additional packages will be installed:
libreadline6-dev libtinfo-dev
Suggested packages:
readline-doc
The following NEW packages will be installed:
libreadline-dev libreadline6-dev libtinfo-dev
0 upgraded, 3 newly installed, 0 to remove and 135 not upgraded.
Need to get 202 kB of archives.
After this operation, 1,094 kB of additional disk space will be used.
Do you want to continue? [Y/n] y
Get:1 http://cn.archive.ubuntu.com/ubuntu xenial/main amd64 libtinfo-dev amd64 6.0+20160213-1ubuntu1 [77.4 kB]
Get:2 http://cn.archive.ubuntu.com/ubuntu xenial/main amd64 libreadline6-dev amd64 6.3-8ubuntu2 [124 kB]
Get:3 http://cn.archive.ubuntu.com/ubuntu xenial/main amd64 libreadline-dev amd64 6.3-8ubuntu2 [992 B]
Fetched 202 kB in 2s (80.5 kB/s)
Selecting previously unselected package libtinfo-dev:amd64.
(Reading database ... 245923 files and directories currently installed.)
Preparing to unpack .../libtinfo-dev_6.0+20160213-1ubuntu1_amd64.deb ...
Unpacking libtinfo-dev:amd64 (6.0+20160213-1ubuntu1) ...
Selecting previously unselected package libreadline6-dev:amd64.
Preparing to unpack .../libreadline6-dev_6.3-8ubuntu2_amd64.deb ...
Unpacking libreadline6-dev:amd64 (6.3-8ubuntu2) ...
Selecting previously unselected package libreadline-dev:amd64.
Preparing to unpack .../libreadline-dev_6.3-8ubuntu2_amd64.deb ...
Unpacking libreadline-dev:amd64 (6.3-8ubuntu2) ...
Processing triggers for install-info (6.1.0.dfsg.1-5) ...
Setting up libtinfo-dev:amd64 (6.0+20160213-1ubuntu1) ...
Setting up libreadline6-dev:amd64 (6.3-8ubuntu2) ...
Setting up libreadline-dev:amd64 (6.3-8ubuntu2) ...
luo@luo-ThinkPad-W540:~$

luo@luo-ThinkPad-W540:~$

luo@luo-ThinkPad-W540:~$

sudo apt install libreadline-dev Reading package lists... Error!的更多相关文章

  1. ubuntu 安装时出错 sudo apt-get update Reading package lists… Error

    安装过程出错 首先出现问题sudo apt-get updateReading package lists… Error!E: Encountered a section with no Packag ...

  2. Reading package lists... Error! 解决方案

    ubuntu 下安装python开发包,执行命令 sudo apt-get install python-dev,报错: Reading package lists... Error! E: Enco ...

  3. Ubuntu18下sudo apt install xxx出现问题

    当执行sudo apt install rpm时失败(apt-get也失败),输出如下报错信息: E: Could not get lock /var/lib/dpkg/lock - open (11 ...

  4. Command 'ifconfig' not found, but can be installed with: sudo apt install net-tools

    然后按照错误信息安安装网络工具: sudo apt install net-tools shl@shl-tx:~$ sudo apt install net-tools正在读取软件包列表... 完成正 ...

  5. sudo apt install net-tools [sudo] zyw 的密码： 正在读取软件包列表... 完成 正在分析软件包的依赖关系树,正在读取状态信息... 完成,没有可用的软件包 net-tools，但是它被其它的软件包引用了。这可能意味着这个缺失的软件包可能已被废弃,或者只能在其他发布源中找到

    截图: 先执行: sudo apt-get update 再执行: sudo apt install net-tools 即可安装成功!!

  6. linux的sudo apt-get install 和dpkg -i <package.deb>命令

    ubuntu统一的安装软件命令 sudo apt-get install ** sudo dpkg -i <package.deb>

  7. kali sudo apt install 无法定位软件包

    在etc/apt   的sources.list 添加镜像源 debhttp://http.kali.org/kali kali-rolling main non-free contrib 或 deb ...

  8. Ubuntu 16.04 安装 Wireshark分析tcpdump的pcap包——sudo apt install wireshark-qt

    tcpdump 的抓包保存到文件的命令参数是-w xxx.cap   抓eth1的包  tcpdump -i eth1 -w /tmp/xxx.cap    抓 192.168.1.123的包  tc ...

  9. Command 'ifconfig' not found, but can be installed with: sudo apt install net-tools VM Ubuntu 解决方案

    VMware下安装的Ubuntu 一开始由于Firefox连不上网,然后通过看了https://www.bbsmax.com/A/VGzlEGYJbq/这个文章之后,自己也测了一下,确实好用 但是if ...

随机推荐

  1. poj 1159 最长回文

    方法  LCS #include<iostream> #include<cstring> #include<algorithm> #include<stdio ...

  2. 剑指offer-第三章高质量代码（反转链表）

    题目:定义一个函数,输入一个链表的头节点,反转该链表并输出反转链表的头节点. 思路:对一个链表反转需要三个指针操作来保证链表在反转的过程中保证不断链,给链表一个行动指针pNode,对pNode指向的节 ...

  3. SQLserver2008使用表达式递归查询

    --由父项递归下级 with cte(id,parentid,text) as ( --父项 select id,parentid,text from treeview where parentid ...

  4. 关于fpga的m9k的部分理解

    1.控制信号包括时钟使能,读写使能,字节使能,地址使能,异步清零等 2.可配置为单端口,简单双端口,真双端口,fifo,rom,移位寄存器. 3.关于移位寄存器模式的介绍如下: 一个 ( w × m ...

  5. 在vue项目中正确的引入jquery和bootstrap

    <script>标签引入jquery在vue脚手架里并不适用,需要利用webpack引入jquery 一.第一种方法 1:因为已经安装了vue脚手架,所以需要在webpack中全局引入jq ...

  6. Python学习系列（五）(文件操作及其字典)

    Python学习系列(五)(文件操作及其字典) Python学习系列(四)(列表及其函数) 一.文件操作 1,读文件      在以'r'读模式打开文件以后可以调用read函数一次性将文件内容全部读出 ...

  7. poj 3590 The shuffle Problem——DP+置换

    题目:http://poj.org/problem?id=3590 bzoj 1025 的弱化版.大概一样的 dp . 输出方案的时候小的环靠前.不用担心 dp 时用 > 还是 >= 来转 ...

  8. Java知识点汇总

    Java中泛型的本质 Java中静态变量的适用场景 Java类加载原理及类加载器 Java中对Clone的理解 Java中HashMap的实现 Java中Collection和Collections的 ...

  9. （转）Makefile经典教程(掌握这些足够)

    该篇文章为转载,是对原作者系列文章的总汇加上标注. 支持原创,请移步陈浩大神博客: http://blog.csdn.net/haoel/article/details/2886 makefile很重 ...

  10. Linux添加路由

    在Linux的VM中可以添加.删除路由. 中如图的拓扑结构中需要在中间的VM上添加路由,使最左边的VM和最右边的VM实现互通. 在这台VM上需要添加IP Forwarding的功能,在操作系统中也需要 ...