docker-compose快速部署elasticsearch-8.x集群+kibana

欢迎访问我的GitHub

这里分类和汇总了欣宸的全部原创(含配套源码)：https://github.com/zq2599/blog_demos

本篇概览

• 前文《Docker下elasticsearch8部署、扩容、基本操作实战(含kibana)》介绍了用docker快速部署es和kibana的过程，然而整个过程人工操作步骤还是多了点，能不能更简单些呢？毕竟很多时候大家关注的是使用，不愿在部署上费太多时间

• 借助docker-compose，可以将es集群+kibana的安装过程可以进一步简化，精简后的步骤如下图，已经省的不能再省了...
  
  

• 本文会按照上述流程进行实战，一共实战两次：第一次部署带证书账号密码的安全版本，第二次部署没有任何安全检查的版本，装好直接访问使用

• 请注意docker部署ElasticSearch的适用场景：我这边只在开发过程中使用，此种方式在生产环境是否适合是有待商榷的，用于生产环境时请您慎重考虑

• 本篇由以下内容构成

1. 介绍我这边实战的环境供您参考
2. Linxu用户需要额外注意的地方
3. 编写配置文件
4. 启动
5. 验证

环境信息

• 以下是本次实战的环境信息，可以作为参考

1. 操作系统：macOS Monterey（M1 Pro芯片的MacBook Pro，16G内存）
2. Docker：Docker Desktop 4.7.1 (77678)
3. ElasticSearch：8.2.2
4. Kibana：8.2.2

Linux用户请注意

• 如果您的环境是Linux，注意要做以下操作，否则es可能会启动失败

1. 用编辑工具打开文件/etc/sysctl.conf

2. 在尾部添加一行配置vm.max_map_count = 262144，如果已存在就修改，数值不能低于262144

3. 修改保存，然后执行命令sudo sysctl -p使其立即生效

编写配置文件

• 再次确认接下来工作的目标：用docker-compose快速部署es集群+kibana，这个集群是带安全检查的（自签证书+账号密码）

• 找个干净目录，新建名为.env的文件，内容如下，这是给docker-compose用到的配置文件每个配置项都有详细注释说明

# elastic账号的密码 (至少六个字符)
ELASTIC_PASSWORD=123456

# kibana_system账号的密码 (至少六个字符)，该账号仅用于一些kibana的内部设置，不能用来查询es
KIBANA_PASSWORD=abcdef

# es和kibana的版本
STACK_VERSION=8.2.2

# 集群名字
CLUSTER_NAME=docker-cluster

# x-pack安全设置，这里选择basic，基础设置，如果选择了trail，则会在30天后到期
LICENSE=basic
#LICENSE=trial

# es映射到宿主机的的端口
ES_PORT=9200

# kibana映射到宿主机的的端口
KIBANA_PORT=5601

# es容器的内存大小，请根据自己硬件情况调整
MEM_LIMIT=1073741824

# 命名空间，会体现在容器名的前缀上
COMPOSE_PROJECT_NAME=demo

• 然后是docker-compose.yaml文件，这里面会用到刚才创建的.env文件，一共创建了五个容器：启动操作、三个es组成集群，一个kibana（多说一句：官方脚本，放心用）

version: "2.2"

services:
  setup:
    image: elasticsearch:${STACK_VERSION}
    volumes:
      - certs:/usr/share/elasticsearch/config/certs
    user: "0"
    command: >
      bash -c '
        if [ x${ELASTIC_PASSWORD} == x ]; then
          echo "Set the ELASTIC_PASSWORD environment variable in the .env file";
          exit 1;
        elif [ x${KIBANA_PASSWORD} == x ]; then
          echo "Set the KIBANA_PASSWORD environment variable in the .env file";
          exit 1;
        fi;
        if [ ! -f config/certs/ca.zip ]; then
          echo "Creating CA";
          bin/elasticsearch-certutil ca --silent --pem -out config/certs/ca.zip;
          unzip config/certs/ca.zip -d config/certs;
        fi;
        if [ ! -f config/certs/certs.zip ]; then
          echo "Creating certs";
          echo -ne \
          "instances:\n"\
          "  - name: es01\n"\
          "    dns:\n"\
          "      - es01\n"\
          "      - localhost\n"\
          "    ip:\n"\
          "      - 127.0.0.1\n"\
          "  - name: es02\n"\
          "    dns:\n"\
          "      - es02\n"\
          "      - localhost\n"\
          "    ip:\n"\
          "      - 127.0.0.1\n"\
          "  - name: es03\n"\
          "    dns:\n"\
          "      - es03\n"\
          "      - localhost\n"\
          "    ip:\n"\
          "      - 127.0.0.1\n"\
          > config/certs/instances.yml;
          bin/elasticsearch-certutil cert --silent --pem -out config/certs/certs.zip --in config/certs/instances.yml --ca-cert config/certs/ca/ca.crt --ca-key config/certs/ca/ca.key;
          unzip config/certs/certs.zip -d config/certs;
        fi;
        echo "Setting file permissions"
        chown -R root:root config/certs;
        find . -type d -exec chmod 750 \{\} \;;
        find . -type f -exec chmod 640 \{\} \;;
        echo "Waiting for Elasticsearch availability";
        until curl -s --cacert config/certs/ca/ca.crt https://es01:9200 | grep -q "missing authentication credentials"; do sleep 30; done;
        echo "Setting kibana_system password";
        until curl -s -X POST --cacert config/certs/ca/ca.crt -u elastic:${ELASTIC_PASSWORD} -H "Content-Type: application/json" https://es01:9200/_security/user/kibana_system/_password -d "{\"password\":\"${KIBANA_PASSWORD}\"}" | grep -q "^{}"; do sleep 10; done;
        echo "All done!";
      '
    healthcheck:
      test: ["CMD-SHELL", "[ -f config/certs/es01/es01.crt ]"]
      interval: 1s
      timeout: 5s
      retries: 120

  es01:
    depends_on:
      setup:
        condition: service_healthy
    image: elasticsearch:${STACK_VERSION}
    volumes:
      - certs:/usr/share/elasticsearch/config/certs
      - esdata01:/usr/share/elasticsearch/data
    ports:
      - ${ES_PORT}:9200
    environment:
      - node.name=es01
      - cluster.name=${CLUSTER_NAME}
      - cluster.initial_master_nodes=es01,es02,es03
      - discovery.seed_hosts=es02,es03
      - ELASTIC_PASSWORD=${ELASTIC_PASSWORD}
      - bootstrap.memory_lock=true
      - xpack.security.enabled=true
      - xpack.security.http.ssl.enabled=true
      - xpack.security.http.ssl.key=certs/es01/es01.key
      - xpack.security.http.ssl.certificate=certs/es01/es01.crt
      - xpack.security.http.ssl.certificate_authorities=certs/ca/ca.crt
      - xpack.security.http.ssl.verification_mode=certificate
      - xpack.security.transport.ssl.enabled=true
      - xpack.security.transport.ssl.key=certs/es01/es01.key
      - xpack.security.transport.ssl.certificate=certs/es01/es01.crt
      - xpack.security.transport.ssl.certificate_authorities=certs/ca/ca.crt
      - xpack.security.transport.ssl.verification_mode=certificate
      - xpack.license.self_generated.type=${LICENSE}
    mem_limit: ${MEM_LIMIT}
    ulimits:
      memlock:
        soft: -1
        hard: -1
    healthcheck:
      test:
        [
          "CMD-SHELL",
          "curl -s --cacert config/certs/ca/ca.crt https://localhost:9200 | grep -q 'missing authentication credentials'",
        ]
      interval: 10s
      timeout: 10s
      retries: 120

  es02:
    depends_on:
      - es01
    image: elasticsearch:${STACK_VERSION}
    volumes:
      - certs:/usr/share/elasticsearch/config/certs
      - esdata02:/usr/share/elasticsearch/data
    environment:
      - node.name=es02
      - cluster.name=${CLUSTER_NAME}
      - cluster.initial_master_nodes=es01,es02,es03
      - discovery.seed_hosts=es01,es03
      - bootstrap.memory_lock=true
      - xpack.security.enabled=true
      - xpack.security.http.ssl.enabled=true
      - xpack.security.http.ssl.key=certs/es02/es02.key
      - xpack.security.http.ssl.certificate=certs/es02/es02.crt
      - xpack.security.http.ssl.certificate_authorities=certs/ca/ca.crt
      - xpack.security.http.ssl.verification_mode=certificate
      - xpack.security.transport.ssl.enabled=true
      - xpack.security.transport.ssl.key=certs/es02/es02.key
      - xpack.security.transport.ssl.certificate=certs/es02/es02.crt
      - xpack.security.transport.ssl.certificate_authorities=certs/ca/ca.crt
      - xpack.security.transport.ssl.verification_mode=certificate
      - xpack.license.self_generated.type=${LICENSE}
    mem_limit: ${MEM_LIMIT}
    ulimits:
      memlock:
        soft: -1
        hard: -1
    healthcheck:
      test:
        [
          "CMD-SHELL",
          "curl -s --cacert config/certs/ca/ca.crt https://localhost:9200 | grep -q 'missing authentication credentials'",
        ]
      interval: 10s
      timeout: 10s
      retries: 120

  es03:
    depends_on:
      - es02
    image: elasticsearch:${STACK_VERSION}
    volumes:
      - certs:/usr/share/elasticsearch/config/certs
      - esdata03:/usr/share/elasticsearch/data
    environment:
      - node.name=es03
      - cluster.name=${CLUSTER_NAME}
      - cluster.initial_master_nodes=es01,es02,es03
      - discovery.seed_hosts=es01,es02
      - bootstrap.memory_lock=true
      - xpack.security.enabled=true
      - xpack.security.http.ssl.enabled=true
      - xpack.security.http.ssl.key=certs/es03/es03.key
      - xpack.security.http.ssl.certificate=certs/es03/es03.crt
      - xpack.security.http.ssl.certificate_authorities=certs/ca/ca.crt
      - xpack.security.http.ssl.verification_mode=certificate
      - xpack.security.transport.ssl.enabled=true
      - xpack.security.transport.ssl.key=certs/es03/es03.key
      - xpack.security.transport.ssl.certificate=certs/es03/es03.crt
      - xpack.security.transport.ssl.certificate_authorities=certs/ca/ca.crt
      - xpack.security.transport.ssl.verification_mode=certificate
      - xpack.license.self_generated.type=${LICENSE}
    mem_limit: ${MEM_LIMIT}
    ulimits:
      memlock:
        soft: -1
        hard: -1
    healthcheck:
      test:
        [
          "CMD-SHELL",
          "curl -s --cacert config/certs/ca/ca.crt https://localhost:9200 | grep -q 'missing authentication credentials'",
        ]
      interval: 10s
      timeout: 10s
      retries: 120

  kibana:
    depends_on:
      es01:
        condition: service_healthy
      es02:
        condition: service_healthy
      es03:
        condition: service_healthy
    image: kibana:${STACK_VERSION}
    volumes:
      - certs:/usr/share/kibana/config/certs
      - kibanadata:/usr/share/kibana/data
    ports:
      - ${KIBANA_PORT}:5601
    environment:
      - SERVERNAME=kibana
      - ELASTICSEARCH_HOSTS=https://es01:9200
      - ELASTICSEARCH_USERNAME=kibana_system
      - ELASTICSEARCH_PASSWORD=${KIBANA_PASSWORD}
      - ELASTICSEARCH_SSL_CERTIFICATEAUTHORITIES=config/certs/ca/ca.crt
    mem_limit: ${MEM_LIMIT}
    healthcheck:
      test:
        [
          "CMD-SHELL",
          "curl -s -I http://localhost:5601 | grep -q 'HTTP/1.1 302 Found'",
        ]
      interval: 10s
      timeout: 10s
      retries: 120

volumes:
  certs:
    driver: local
  esdata01:
    driver: local
  esdata02:
    driver: local
  esdata03:
    driver: local
  kibanadata:
    driver: local

• 注意：.env和docker-compose.yaml两个文件在同一目录下

启动应用

• 在docker-compose.yaml文件所在目录，执行命令docker-compose up -d启动所有容器

❯ docker-compose up -d
Creating network "demo_default" with the default driver
Pulling setup (elasticsearch:8.2.2)...
8.2.2: Pulling from library/elasticsearch
Digest: sha256:8c666cb1e76650306655b67644a01663f9c7a5422b2c51dd570524267f11ce3d
Status: Downloaded newer image for elasticsearch:8.2.2
Pulling kibana (kibana:8.2.2)...
8.2.2: Pulling from library/kibana
Digest: sha256:cf34801f36a2e79c834b3cdeb0a3463ff34b8d8588c3ccdd47212c4e0753f8a5
Status: Downloaded newer image for kibana:8.2.2
Creating demo_setup_1 ... done
Creating demo_es01_1  ... done
Creating demo_es02_1  ... done
Creating demo_es03_1  ... done
Creating demo_kibana_1 ... done

• 查看容器状态，负责启动的demo_setup_1已退出，其他的正常运行

❯ docker ps -a
CONTAINER ID   IMAGE                 COMMAND                  CREATED          STATUS                      PORTS                              NAMES
c8ce010cddfc   kibana:8.2.2          "/bin/tini -- /usr/l…"   20 minutes ago   Up 20 minutes (healthy)     0.0.0.0:5601->5601/tcp             demo_kibana_1
78662d44ae31   elasticsearch:8.2.2   "/bin/tini -- /usr/l…"   21 minutes ago   Up 21 minutes (healthy)     9200/tcp, 9300/tcp                 demo_es03_1
7e96273872cb   elasticsearch:8.2.2   "/bin/tini -- /usr/l…"   21 minutes ago   Up 21 minutes (healthy)     9200/tcp, 9300/tcp                 demo_es02_1
8b8be1d645ba   elasticsearch:8.2.2   "/bin/tini -- /usr/l…"   21 minutes ago   Up 21 minutes (healthy)     0.0.0.0:9200->9200/tcp, 9300/tcp   demo_es01_1
c48ffb724ca2   elasticsearch:8.2.2   "/bin/tini -- /usr/l…"   21 minutes ago   Exited (0) 20 minutes ago                                      demo_setup_1

• 看看demo_setup_1的日志，提示启动顺利

❯ docker logs demo_setup_1
Setting file permissions
Waiting for Elasticsearch availability
Setting kibana_system password
All done!

• 如果要使用curl命令向ES发请求，需要提前将crt文件从容器中复制出来

docker cp demo_es01_1:/usr/share/elasticsearch/config/certs/es01/es01.crt .

验证

• 现在来验证es集群和kibana能不能正常工作

• 浏览器访问https://localhost:9200/，注意是https，会看到以下警告页面
  
  

• 此时直接键入thisisunsafe再回车，会提示输入账号密码，根据之前的配置账号elastic，密码123456

• 浏览器显示如下，证明es成功响应了
  
  

• 如果chrome上安装了eshead插件，此时就能查看es集群情况了(注意内部的地址栏中，要用https，而非http)，如下图，一共三个节点，es02前面有五角星标志，表示其主节点的身份
  
  

• 目前看来es集群部署和运行都已经正常，再看kibana是否可用

• 访问http://localhost:5601/，账号elastic，密码123456
  
  

• 点击下图红框位置，进入输入命令的页面
  
  

• 如下图，左侧输入创建索引的命令，再点击红框中的按钮，右侧会显示执行结果
  
  

• 批量写入两条记录
  
  

• 最后是查询操作
  
  

清理

• 如果要删除es，执行docker-compose down就会删除容器，但是，此命令不会删除数据，下次执行docker-compose up -d后，新的es集群中会出现刚才创建的test001索引，并且数据也在
• 这是因为docker-compose.yaml中使用了数据卷volume存储es集群的关键数据，这些输入被保存在宿主机的磁盘上

❯ docker volume ls
DRIVER    VOLUME NAME
local     demo_certs
local     demo_esdata01
local     demo_esdata02
local     demo_esdata03
local     demo_kibanadata

• 执行docker volume rm demo_certs demo_esdata01 demo_esdata02 demo_esdata03即可将它们彻底清除
• 以上就是快速部署es集群+kibana的整个过程了，是不是很简单呢？

不带密码的集群

• 有时候咱们部署es不需要安全认证，例如开发环境，或者有防火墙禁止外部访问的环境，那么刚才的部署就不够用了，咱们需要一个更简单的、部署完了立刻能用的集群，接下来动手试试吧

• 找个干净目录，新建名为.env的文件，内容如下，和安全版相比去掉了一些不需要的内容

# kibana_system账号的密码 (至少六个字符)，该账号仅用于一些kibana的内部设置，不能用来查询es
KIBANA_PASSWORD=abcdef

# es和kibana的版本
STACK_VERSION=8.2.2

# 集群名字
CLUSTER_NAME=docker-cluster

# es映射到宿主机的的端口
ES_PORT=9200

# kibana映射到宿主机的的端口
KIBANA_PORT=5601

# es容器的内存大小，请根据自己硬件情况调整
MEM_LIMIT=1073741824

# 命名空间，会体现在容器名的前缀上
COMPOSE_PROJECT_NAME=demo

• 然后是docker-compose.yaml文件，这里面会用到刚才创建的.env文件，和安全版相比去掉了启动容器，和安全相关的配置和脚本也删除了

version: "2.2"

services:
  es01:
    image: elasticsearch:${STACK_VERSION}
    volumes:
      - esdata01:/usr/share/elasticsearch/data
    ports:
      - ${ES_PORT}:9200
    environment:
      - node.name=es01
      - cluster.name=${CLUSTER_NAME}
      - cluster.initial_master_nodes=es01,es02,es03
      - discovery.seed_hosts=es02,es03
      - bootstrap.memory_lock=true
      - xpack.security.enabled=false
      - xpack.security.http.ssl.enabled=false
      - xpack.security.transport.ssl.enabled=false
    mem_limit: ${MEM_LIMIT}
    ulimits:
      memlock:
        soft: -1
        hard: -1

  es02:
    depends_on:
      - es01
    image: elasticsearch:${STACK_VERSION}
    volumes:
      - esdata02:/usr/share/elasticsearch/data
    environment:
      - node.name=es02
      - cluster.name=${CLUSTER_NAME}
      - cluster.initial_master_nodes=es01,es02,es03
      - discovery.seed_hosts=es01,es03
      - bootstrap.memory_lock=true
      - xpack.security.enabled=false
      - xpack.security.http.ssl.enabled=false
      - xpack.security.transport.ssl.enabled=false
    mem_limit: ${MEM_LIMIT}
    ulimits:
      memlock:
        soft: -1
        hard: -1

  es03:
    depends_on:
      - es02
    image: elasticsearch:${STACK_VERSION}
    volumes:
      - esdata03:/usr/share/elasticsearch/data
    environment:
      - node.name=es03
      - cluster.name=${CLUSTER_NAME}
      - cluster.initial_master_nodes=es01,es02,es03
      - discovery.seed_hosts=es01,es02
      - bootstrap.memory_lock=true
      - xpack.security.enabled=false
      - xpack.security.http.ssl.enabled=false
      - xpack.security.transport.ssl.enabled=false
    mem_limit: ${MEM_LIMIT}
    ulimits:
      memlock:
        soft: -1
        hard: -1
  kibana:
    image: kibana:${STACK_VERSION}
    volumes:
      - kibanadata:/usr/share/kibana/data
    ports:
      - ${KIBANA_PORT}:5601
    environment:
      - SERVERNAME=kibana
      - ELASTICSEARCH_HOSTS=http://es01:9200
      - ELASTICSEARCH_USERNAME=kibana_system
      - ELASTICSEARCH_PASSWORD=${KIBANA_PASSWORD}
    mem_limit: ${MEM_LIMIT}

volumes:
  esdata01:
    driver: local
  esdata02:
    driver: local
  esdata03:
    driver: local
  kibanadata:
    driver: local

• 注意：.env和docker-compose.yaml两个文件在同一目录下

启动和验证

• 启动前，请先停止和清理掉刚才部署的安全版
• 在docker-compose.yaml文件所在目录，执行命令docker-compose up -d启动所有容器，稍等片刻，可见所有容器已经就绪

❯ docker ps -a
CONTAINER ID   IMAGE                 COMMAND                  CREATED         STATUS         PORTS                              NAMES
11663375288d   elasticsearch:8.2.2   "/bin/tini -- /usr/l…"   4 minutes ago   Up 4 minutes   9200/tcp, 9300/tcp                 demo_es03_1
ad6f0390b9cf   elasticsearch:8.2.2   "/bin/tini -- /usr/l…"   4 minutes ago   Up 4 minutes   9200/tcp, 9300/tcp                 demo_es02_1
5080709e5358   kibana:8.2.2          "/bin/tini -- /usr/l…"   4 minutes ago   Up 4 minutes   0.0.0.0:5601->5601/tcp             demo_kibana_1
4b1e576fbfd3   elasticsearch:8.2.2   "/bin/tini -- /usr/l…"   4 minutes ago   Up 4 minutes   0.0.0.0:9200->9200/tcp, 9300/tcp   demo_es01_1

• 浏览器访问http://localhost:9200/ ，注意是http，收到es响应
  
  
• chrome的eshead插件也能正常获取es集群信息
  
  
• 访问kibana，地址是http://localhost:5601/ ，注意是http，能够正常使用，下图是成功创建索引的操作
  
  
• 至此，基于docker-compose部署es集群+kibana的部署已经完成，借助娴熟的复制粘贴操作，快速部署一个es集群简直易如反掌，如果您正要快速部署一套es集群，希望本文能给您一些参考

欢迎关注博客园：程序员欣宸

学习路上，你不孤单，欣宸原创一路相伴...