【iCore4 双核心板_ARM】例程五：SYSTICK定时器 实验——定时点亮LED

实验原理：

　　通过STM32的三个GPIO口驱动三色LED的三个通道，设定GPIO为推挽输出模式，采

用灌电流方式与LED连接，输出高电平LED灭，输出低电平LED亮，通过系统定时器实现

1s定时，每秒变换一次LED颜色。

核心代码：

int main(void)
{

  /* USER CODE BEGIN 1 */
    static int led_work_status;

  /* USER CODE END 1 */

  /* MCU Configuration----------------------------------------------------------*/

  /* Reset of all peripherals, Initializes the Flash interface and the Systick. */
  HAL_Init();

  /* USER CODE BEGIN Init */

  /* USER CODE END Init */

  /* Configure the system clock */
  SystemClock_Config();

  /* USER CODE BEGIN SysInit */

  /* USER CODE END SysInit */

  /* Initialize all configured peripherals */
  MX_GPIO_Init();

  /* USER CODE BEGIN 2 */

  /* USER CODE END 2 */

  /* Infinite loop */
  /* USER CODE BEGIN WHILE */
  while ()
  {
  /* USER CODE END WHILE */

  /* USER CODE BEGIN 3 */
        if(systick.second_flag == ){
            systick.second_flag = ;
            led_work_status += ;
            if(led_work_status > )led_work_status = ;
            switch (led_work_status){
                case  :
                    LED_RED_ON;
                    LED_GREEN_OFF;
                    LED_BLUE_OFF;
                    break;

                case  :
                    LED_RED_OFF;
                    LED_GREEN_ON;
                    LED_BLUE_OFF;
                    break;

                case :
                    LED_RED_OFF;
                    LED_GREEN_OFF;
                    LED_BLUE_ON;
                    break;

                default:

                    break;
            }
        }
  }
  /* USER CODE END 3 */

}

void HAL_SYSTICK_Callback(void)
{
    //中断时间1ms，每ims进入一次中断
    static int counter = ;

    if((counter ++ % ) == ){
        systick.second_flag = ;
    }
}

源代码下载链接：

链接：http://pan.baidu.com/s/1eSclNOI 密码：cddu

iCore4链接：