ubuntu配置静态路由

1. #ifconfig

注意 eth0为你要配置的interfase

2. #vi /etc/network/interfaces

# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).

# The loopback network interface
auto lo
iface lo inet loopback

# The primary network interface
auto eth0
iface eth0 inet dhcp

很明显看到eth0为dhcp模式，动态分配ip

改为

auto eth0
iface eth0 inet static
address 10.0.0.160
gateway 10.0.0.1
netmask 255.255.255.0

注意：网关和掩码要和主机上的桥接网路一致

3.#service networking restart

4.最好还是重启下虚拟机