原文网址:http://blog.csdn.net/njchenyi/article/details/8715417

1、配置静态IP地址:

# vim /etc/network/interfaces

原内容有如下4行:

auto lo
iface lo inet loopback

auto eth0
iface eth0 inet dhcp

以上表示默认使用DHCP分配IP,修改为如下:


auto lo
iface lo inet loopback

# The primary network interface
auto eth0
#iface eth0 inet dhcp

iface eth0 inet static
address 192.168.80.129
netmask 255.255.255.0
gateway 192.168.80.2

保存退出。
注意:只需要设置address(IP地址)、netmask(子网掩码)、gateway(网关)这三项就OK,network和broadcast这两项参数是可以不写的。

2、手动设置DNS服务器:

# vim /etc/resolv.conf

添加如下内容(这点所有Linux发行版都通用):

nameserver 192.168.80.2
nameserver 8.8.8.8

保存退出。

注意:重启Ubuntu后发现又不能上网了,问题出在/etc/resolv.conf。重启后,此文件配置的dns又被自动修改为默认值。所以需要永久性修改DNS。方法如下:

# vim /etc/resolvconf/resolv.conf.d/base
nameserver 192.168.80.2
nameserver 8.8.8.8

3、重启networking服务使其生效:

# /etc/init.d/networking restart

这样网络配置就永久生效。

【转】Ubuntu Server 12.04 静态IP简洁配置的更多相关文章

  1. Ubuntu Server 12.04 静态IP简洁配置

    PS:很长时间没使用Ubuntu了,刚才安装个Ubuntu Server 12.04做测试.Ubuntu的网络设置跟Redhat系是不一样的,配置IP时发现跟以前的Ubuntu桌面版本也有所不同,记录 ...

  2. Ubuntu Server 12.04(14.04) 静态IP简洁配置

    1.配置静态IP地址: # vim /etc/network/interfaces 原内容有如下4行:auto loiface lo inet loopback auto eth0iface eth0 ...

  3. [Linux] Ubuntu Server 12.04 LTS 平台上搭建WordPress(Nginx+MySql+PHP) Part II

    接着上一节继续搭建我们的LNMP平台,接下来我们安装PHP相关的服务 sudo apt-get install php5-cli php5-cgi php5-fpm php5-mcrypt php5- ...

  4. Ubuntu Server 16.04修改IP、DNS、hosts

    本文记录下Ubuntu Server 16.04修改IP.DNS.hosts的方法 -------- 1. Ubuntu Server 16.04修改IP sudo vi /etc/network/i ...

  5. ubuntu Server 设置主机静态 ip地址

    ubuntu Server 设置主机静态 ip地址 1:先输入 ifconfig 查看当前网络配置 2:然后关闭 eth0 网卡 sudo ifdown eth0 3:配置静态ip sudo vim ...

  6. 安装Drupal7.12+Postgresql9.1(Ubuntu Server 12.04)

    怀揣着为中小企业量身定做一整套开源软件解决方案的梦想开始了一个网站的搭建.http://osssme.org/ OS环境准备 这次是从OS开始安装的.最开始装Ubuntu12.04这里就不再赘述, 唯 ...

  7. U盘安装ubuntu server 12.04的问题检测不到CDROM的解决

    U盘安装ubuntu server 12.04的问题检测不到CDROM的解决 ========================== 我是u盘安装ubuntu 14 64Bit 也是出现同样的问题 用u ...

  8. [Linux] Ubuntu Server 12.04 LTS 平台上搭建WordPress(Nginx+MySQL+PHP) Part IV

    接下来我们去下载 WorePress 用最新的 3.7.1 下载地址是:http://cn.wordpress.org/wordpress-3.7.1-zh_CN.zip 我们先建立一个文件夹 /va ...

  9. vagrant Ubuntu server 12.04 dpkg: dependency problems prevent configuration of python-gi

    Ubuntu server 12.04因为尝试安装过xfce,导致sudo apt-get install xxx 都会返回,如: vagrant@precise32:~$ sudo apt-get ...

随机推荐

  1. troubleshooting tools in JDK 7--转载

    This chapter describes in detail the troubleshooting tools that are available in JDK 7. In addition, ...

  2. Creating a simple static file server with Rewrite--reference

    Today, I’d like to take a quick moment to demonstrate how to make a simple file server using Rewrite ...

  3. 从 ReactiveCocoa 中能学到什么?不用此库也能学以致用

    从知道ReactiveCocoa开始就发现对这个库有不同的声音,上次参加<T>技术沙龙时唐巧对在项目中已全面使用FRP的代码家提出为什么这种编程模型出现了这么长时间怎么像ReactiveC ...

  4. SpringMVC11文件上传

    <%@ page language="java" import="java.util.*" pageEncoding="UTF-8"% ...

  5. php创建读取 word.doc文档

    创建文档; <?php $html = "this is question"; for($i=1;$i<=3;$i++){ $word = new word(); $w ...

  6. Android开发手记(19) 数据存储四 ContentProvider

    转载自:http://www.cnblogs.com/devinzhang/archive/2012/01/20/2327863.html Android为数据存储提供了五种方式: 1.SharedP ...

  7. Set Linux starts in multi-user mode as default.

    ref: How to start Linux in multiuser mode rather than boot directly into XWindows (X11) steps: Log i ...

  8. 玩转iOS 9的UIDynamics(转)

    转自 http://www.cocoachina.com/ios/20150716/12613.html 本文由CocoaChina翻译小组成员AGSpider(微博)翻译自fancypixel的博客 ...

  9. Active控件有关问题

    ActiveX 控件是允许网站提供视频等内容的网站. 当你浏览 Web 时,它们允许你使用工具栏.股票代号.视频和其它内容. 但是,这些程序有时可能出现问题,或者向你提供不需要的内容. 在某些情况下, ...

  10. Linux进程或线程绑定到CPU

    Linux进程或线程绑定到CPU 为了让程序拥有更好的性能,有时候需要将进程或线程绑定到特定的CPU,这样可以减少调度的开销和保护关键进程或线程. 进程绑定到CPU Linux提供一个接口,可以将进程 ...