参考自:http://blog.csdn.net/csdnones/article/details/51513163,感谢原作者解决了我的问题。

执行xhost +,报以下错误,原因是因未没有安装相关的包(其他类似command not found命令没有可以用这种方式解决)

[root@rac01 ~]# xhost +
-bash: xhost: command not found

安装该包即可:

[root@rac01 ~]# yum whatprovides "*/xhost"
Loaded plugins: product-id, security, subscription-manager
This system is not registered to Red Hat Subscription Management. You can use subscription-manager to register.
base/filelists_db                                                               | 3.4 MB     00:00 ...
xorg-x11-server-utils-7.7-2.el6.x86_64 : X.Org X11 X server utilities
Repo        : base
Matched from:
Filename    : /usr/bin/xhost

[root@rac01 ~]# yum -y install xorg-x11-server-utils-7.7-2.el6.x86_64
Loaded plugins: product-id, security, subscription-manager
This system is not registered to Red Hat Subscription Management. You can use subscription-manager to register.
Setting up Install Process
Resolving Dependencies
--> Running transaction check
---> Package xorg-x11-server-utils.x86_64 0:7.7-2.el6 will be installed
--> Processing Dependency: mcpp for package: xorg-x11-server-utils-7.7-2.el6.x86_64
--> Processing Dependency: libXxf86misc.so.1()(64bit) for package: xorg-x11-server-utils-7.7-2.el6.x86_64
--> Running transaction check
---> Package libXxf86misc.x86_64 0:1.0.3-4.el6 will be installed
---> Package mcpp.x86_64 0:2.7.2-4.1.el6 will be installed
--> Processing Dependency: libmcpp.so.0()(64bit) for package: mcpp-2.7.2-4.1.el6.x86_64
--> Running transaction check
---> Package libmcpp.x86_64 0:2.7.2-4.1.el6 will be installed
--> Finished Dependency Resolution

Dependencies Resolved

=======================================================================================================
 Package                           Arch               Version                   Repository        Size
=======================================================================================================
Installing:
 xorg-x11-server-utils             x86_64             7.7-2.el6                 base             155 k
Installing for dependencies:
 libXxf86misc                      x86_64             1.0.3-4.el6               base              18 k
 libmcpp                           x86_64             2.7.2-4.1.el6             base              69 k
 mcpp                              x86_64             2.7.2-4.1.el6             base              23 k

Transaction Summary
=======================================================================================================
Install       4 Package(s)

Total download size: 265 k
Installed size: 570 k
Downloading Packages:
-------------------------------------------------------------------------------------------------------
Total                                                                  2.2 MB/s | 265 kB     00:00     
Running rpm_check_debug
Running Transaction Test
Transaction Test Succeeded
Running Transaction
  Installing : libXxf86misc-1.0.3-4.el6.x86_64                                                     1/4
  Installing : libmcpp-2.7.2-4.1.el6.x86_64                                                        2/4
  Installing : mcpp-2.7.2-4.1.el6.x86_64                                                           3/4
  Installing : xorg-x11-server-utils-7.7-2.el6.x86_64                                              4/4
  Verifying  : libmcpp-2.7.2-4.1.el6.x86_64                                                        1/4
  Verifying  : xorg-x11-server-utils-7.7-2.el6.x86_64                                              2/4
  Verifying  : libXxf86misc-1.0.3-4.el6.x86_64                                                     3/4
  Verifying  : mcpp-2.7.2-4.1.el6.x86_64                                                           4/4

Installed:
  xorg-x11-server-utils.x86_64 0:7.7-2.el6

Dependency Installed:
  libXxf86misc.x86_64 0:1.0.3-4.el6    libmcpp.x86_64 0:2.7.2-4.1.el6    mcpp.x86_64 0:2.7.2-4.1.el6

Complete!

【linux报错】-bash: xhost: command not found的更多相关文章

  1. linux报错-bash: xhost: command not found

    本帖转自倔强小梦https://www.cnblogs.com/xphdbky/p/8243008.html 倔强小梦参考自:http://blog.csdn.net/csdnones/article ...

  2. source /etc/profile报错-bash: id:command is not found

    由于误操作导致 source /etc/profile 报错 -bash: id:command is not found 此时,linux下很多命令到不能能用,包括vi ls 等... 可以使用 e ...

  3. linux下报错bash: service: command not found

    在linux下操作的时候经常会遇到,bash: service: command not found这个错误,以前在网上找了,照着弄了,也没细看原因,今天又碰到这个问题,就顺便研究一下. 1.通常这种 ...

  4. scp报错 -bash: scp: command not found

    环境:RHEL6.5 使用scp命令报错: [root@oradb23 media]# scp /etc/hosts oradb24:/etc/ -bash: scp: command not fou ...

  5. scp命令报错-bash: scp: command not found

    # scp -bash: scp: command not found # which scp /usr/bin/scp # rpm -qf /usr/bin/scp openssh-clients- ...

  6. scp拷贝文件报错-bash: scp: command not found

    今天用scp远程传输资料,报错如下: -bash: scp: command not found 在网上搜资料解决办法如下: 安装scp的软件包: # yum install openssh-clie ...

  7. Mac 终端命令行报错 -bash: vi: command not found

    我遇到的问题与这个类似,但是我的问题也是用该博文作者方法进行中断才解决的,在此表示感谢. 前段时间在 Mac 下使用终端遇到了这个问题: appledeMacBook-Air:~ air$ vi .b ...

  8. Mac 执行 gulp 报错 -bash: gulp: command not found

    在mac系统下安装gulp,之后执行gulp 报如下错误: -bash: gulp: command not found 回溯安装过程发现问题如下 1.执行 npm root: Application ...

  9. Linux pip命令报错 -bash: pip: command not found

    下载 $ wget https://bootstrap.pypa.io/get-pip.py 安装 $ python get-pip.py 查看版本 $ pip -V 查看安装路径: find / - ...

  10. linux 报错 bash ‘/bin/sh: Syntax error: “(” unexpected

    今天用make 编译 蹦到 bash ‘/bin/sh: Syntax error: “(” unexpected 和 /bin/sh: [[: not found 这种莫名奇妙的错误 原因是是lin ...

随机推荐

  1. 「NOIP2018 保卫王国」

    题目 强制选点我们可以把那个点权搞成\(-inf\),强制不选我们搞成\(inf\),之后就真的成为动态\(dp\)的板子题了 由于不想像板子那样再写一个最大独立集的方程,之后利用最小点覆盖=总点权- ...

  2. face++

    1.链表反转 2.快排 3.m*k   n*k两矩阵计算欧几里得距离np.tile 4.链表排序,要求时间复杂度小于O(N^2),空间O(1),不允许改变链表的值 5.2sum及其变体 6.给一个数组 ...

  3. 【转】Java做服务器开发语言

    版权声明:本文为博主原创文章,未经博主允许不得转载. 随着游戏市场的兴起,特别是网页游戏.手机游戏的崛起,对游戏开发技术的需求越来越多.网络游戏开发是一个庞大的体系,总体来说是客户端与服务器端.客户端 ...

  4. 查看mysql中所有表的数据记录

    select table_name,table_rows from tables where TABLE_SCHEMA = 'database name' order by table_rows de ...

  5. vlc-android native调试配置

    1, 按照官网给出的链接,git clone代码,配置好android sdk,ndk...后运行compile.sh; 2, 出现一个protobuf相关的问题(貌似要求protobuf3),自己去 ...

  6. first-child伪类选择器

    原文链接地址:https://www.cnblogs.com/wangmeijian/p/4562304.html :first-child 选择器用于选取属于其父元素的首个子元素的指定选择器.——w ...

  7. OpenID Connect Core 1.0(四)使用授权码流验证(上)

    3.1 使用授权码流验证(Authentication using the Authorization Code Flow) 本节描述如何使用授权码流执行验证.当使用授权码流时,会从令牌终结点返回的所 ...

  8. Python 学习笔记(十二)Python文件和迭代(二)

    迭代 基本含义 迭代是重复反馈过程的活动,其目的通常是为了接近并到达所需的目标或结果.每一次对过程的重复被称为一次“迭代”,而每一次迭代得到的结果会被用来作为下一次迭代的初始值.  在计算科学中,迭代 ...

  9. 【Python】01 - 常见用法随见随梳理

    1. range() 和 xrange()的区别 for x in range(5): print x for x in xrange(5): print x 这么看,range和xrange返回的值 ...

  10. jQuery属性操作之.val()函数

    目录 .val()实例方法的三种用法 .val()函数源码 调用形式:$('xxx').val(); 调用形式:$('xxx').val(value); 调用形式:$('xxx').val(funct ...