dhcp报错
报错详情
- 查看dhcpd.service状态
- 使用命令检查配置文件报错
dhcpd -t -cf /etc/dhcp/dhcpd.conf
- 修改配置文件
- 重启dhcpd服务
[root@servera ~]# systemctl restart dhcpd
Job for dhcpd.service failed because the control process exited with error code.
See "systemctl status dhcpd.service" and "journalctl -xeu dhcpd.service" for details.
[root@servera ~]# journalctl -xeu dhcpd
May 13 19:07:58 servera dhcpd[5893]:
May 13 19:07:58 servera dhcpd[5893]: This version of ISC DHCP is based on the relea>
May 13 19:07:58 servera dhcpd[5893]: on ftp.isc.org. Features have been added and o>
May 13 19:07:58 servera dhcpd[5893]: have been made to the base software release in>
May 13 19:07:58 servera dhcpd[5893]: it work better with this distribution.
May 13 19:07:58 servera dhcpd[5893]:
May 13 19:07:58 servera dhcpd[5893]: Please report issues with this software via:
May 13 19:07:58 servera dhcpd[5893]: https://bugzilla.redhat.com/
May 13 19:07:58 servera dhcpd[5893]:
May 13 19:07:58 servera dhcpd[5893]: exiting.
May 13 19:07:58 servera systemd[1]: dhcpd.service: Main process exited, code=exited>
░░ Subject: Unit process exited
░░ Defined-By: systemd
░░ Support: https://access.redhat.com/support
░░
░░ An ExecStart= process belonging to unit dhcpd.service has exited.
░░
░░ The process' exit code is 'exited' and its exit status is 1.
May 13 19:07:58 servera systemd[1]: dhcpd.service: Failed with result 'exit-code'.
░░ Subject: Unit failed
░░ Defined-By: systemd
░░ Support: https://access.redhat.com/support
░░
░░ The unit dhcpd.service has entered the 'failed' state with result 'exit-code'.
May 13 19:07:58 servera systemd[1]: Failed to start DHCPv4 Server Daemon.
░░ Subject: A start job for unit dhcpd.service has failed
░░ Defined-By: systemd
░░ Support: https://access.redhat.com/support
░░
░░ A start job for unit dhcpd.service has finished with a failure.
░░
░░ The job identifier is 5511 and the job result is failed.
lines 504-535/535 (END)
May 13 19:07:58 servera dhcpd[5893]:
May 13 19:07:58 servera dhcpd[5893]: This version of ISC DHCP is based on the release available
May 13 19:07:58 servera dhcpd[5893]: on ftp.isc.org. Features have been added and other changes
May 13 19:07:58 servera dhcpd[5893]: have been made to the base software release in order to make
May 13 19:07:58 servera dhcpd[5893]: it work better with this distribution.
May 13 19:07:58 servera dhcpd[5893]:
May 13 19:07:58 servera dhcpd[5893]: Please report issues with this software via:
May 13 19:07:58 servera dhcpd[5893]: https://bugzilla.redhat.com/
May 13 19:07:58 servera dhcpd[5893]:
May 13 19:07:58 servera dhcpd[5893]: exiting.
May 13 19:07:58 servera systemd[1]: dhcpd.service: Main process exited, code=exited, status=1/FAILURE
░░ Subject: Unit process exited
░░ Defined-By: systemd
░░ Support: https://access.redhat.com/support
░░
░░ An ExecStart= process belonging to unit dhcpd.service has exited.
░░
░░ The process' exit code is 'exited' and its exit status is 1.
May 13 19:07:58 servera systemd[1]: dhcpd.service: Failed with result 'exit-code'.
░░ Subject: Unit failed
░░ Defined-By: systemd
░░ Support: https://access.redhat.com/support
░░
░░ The unit dhcpd.service has entered the 'failed' state with result 'exit-code'.
May 13 19:07:58 servera systemd[1]: Failed to start DHCPv4 Server Daemon.
░░ Subject: A start job for unit dhcpd.service has failed
░░ Defined-By: systemd
░░ Support: https://access.redhat.com/support
░░
░░ A start job for unit dhcpd.service has finished with a failure.
░░
░░ The job identifier is 5511 and the job result is failed.
[root@servera ~]# dhcpd -t -cf /etc/dhcp/dhcpd.conf
Internet Systems Consortium DHCP Server 4.4.2b1
Copyright 2004-2019 Internet Systems Consortium.
All rights reserved.
For info, please visit https://www.isc.org/software/dhcp/
/etc/dhcp/dhcpd.conf line 10: semicolon expected.
option
^
Configuration file errors encountered -- exiting
This version of ISC DHCP is based on the release available
on ftp.isc.org. Features have been added and other changes
have been made to the base software release in order to make
it work better with this distribution.
Please report issues with this software via:
https://bugzilla.redhat.com/
exiting.
[root@servera ~]# vim /etc/dhcp/dhcpd.conf
[root@servera ~]# dhcpd -t -cf /etc/dhcp/dhcpd.conf
Internet Systems Consortium DHCP Server 4.4.2b1
Copyright 2004-2019 Internet Systems Consortium.
All rights reserved.
For info, please visit https://www.isc.org/software/dhcp/
ldap_gssapi_principal is not set,GSSAPI Authentication for LDAP will not be used
Not searching LDAP since ldap-server, ldap-port and ldap-base-dn were not specified in the config file
Config file: /etc/dhcp/dhcpd.conf
Database file: /var/lib/dhcpd/dhcpd.leases
PID file: /var/run/dhcpd.pid
Source compiled to use binary-leases
[root@servera ~]# systemctl restart dhcpd
dhcp报错的更多相关文章
- 24. Oracle 10g安装检测中DHCP报错
编辑hosts文件: #vi /etc/hosts 添加虚拟机ip 主机名,原来的保持不变,如: 192.168.100.12 localhost.localdomain
- CentOS报错:Could not retrieve mirrorlist http://mirrorlist.centos.org/?release=7&arch=x86_64&repo=os&infra=stock32 error was 14: curl#6 - "Could not resolve host: mirrorlist.centos.org; Unknown error"
今天安装完带图形界面的CentOS 7后,在Terminal中运行yum安装命令时报了以下错误: Could not retrieve mirrorlist http://mirrorlist.cen ...
- Vmware出现报错The VMware Authorization Service is not running.之后无法上网解决
今天一大早开VMware,启动ubuntu时出现了报错The VMware Authorization Service is not running,服务Authorization没有运行. 这之前一 ...
- Ubuntu重启网络/etc/init.d/networking restart报错
Linux版本:Ubuntu 12.04 配置网口后重启网络,提示/etc/init.d/networking restart is deprecated. $ sudo /etc/init.d/ne ...
- PXE+kickstart网络安装CentOS7.4系统及过程中各种报错
环境:关闭防火墙.selinux 注意:虚拟机进行网络安装的话,7.3以后的系统是需要2G以上的内存 [root@kickstart ~]# cat /etc/redhat-release CentO ...
- 在VMware的虚拟机中克隆CentOS,在重启网卡的时候报错解决办法
克隆虚拟机配置 1.修改:vi /etc/hosts 2.修改:vi /etc/sysconfig/network 3.重启生效:reboot或者init 6 如不重启可以输入:hostname 新 ...
- 笔记本电脑切换到无线热点无法联网问题&Spring Cloud相关工程启动报错问题
通过禁用本地网络,和禁用另一个无线网络,以及禁用后重开,修改密码,重连的方式均失败后, 使用IE浏览器浏览提示失败,点击诊断,诊断出DNS服务器无响应异常. 突然想到通过ipconfig查看ip,网关 ...
- CentOS 7.2重启网络报错 Failed to start LSB: Bring up/down
CentOS 7.2重启网络报错 Failed to start LSB: Bring up/down 我的虚拟机原本有两块网卡,一块叫eno16777736,另一块叫eno5033674.本来是正常 ...
- linux中启动网卡报错:Bringing up interface eth1: Error: Connection activation failed
在重启linux网络服务的时候提示: Active connection path: /org/freedesktop/NetworkManager/ActiveConnection/2 并且产生报错 ...
- NBU客户端备份失败,报错error 48 client hostname could not be found
今天在做备份时发现了这个报错.经过ping, nslookup, bpclntcmd命令检查没有发现连接或域名解析存在问题. 参考文档http://www.symantec.com/docs/TECH ...
随机推荐
- signalr 应用于微信小程序(一)
前言 在2017年基于signalr 和微信小程序 写的脚本. 正文 先安装signalr: 1.安装singalr,用nutget就行,用这个包管理就行. 2.使用singalr 3.根据singa ...
- SSM整合项目中使用百度Ueditor遇到的问题。
问题描述:无法上传图片,提示配置项加载有问题 大致情形:直接下载的ue编辑器,放在了/resources/ 目录下,也就是静态资源路径,然后更改web.xml,将tomcat默认拦截器配置放到所有 ...
- 6个高级Vue3知识技巧
Vue 3是一个非常流行的前端框架,广泛应用于大型互联网企业和个人项目. 虽然我们已经熟悉了一些常见的 Vue 3 知识,但还有一些不太常见但实用性很强的点可以帮助我们进一步优化和提升 Vue 3 应 ...
- 《Effective C#》系列之(二)——如何使代码易于阅读和理解
在<Effective C#>这本书中,使代码更易于阅读和理解是其中一章的主要内容.以下是该章节的一些核心建议: 使用清晰.有意义的名称:变量.方法.类型等的名称应该能够准确地描述其含义, ...
- Flink 在唯品会的实践
简介: Flink 在唯品会的容器化实践应用以及产品化经验. 唯品会自 2017 年开始基于 k8s 深入打造高性能.稳定.可靠.易用的实时计算平台,支持唯品会内部业务在平时以及大促的平稳运行.现平台 ...
- 16、数据库加固-mongo 加固
1.指定日志与数据库存放位置 在配置文件中设置指向目录位置 自建配置文件:vim /usr/local/mongodb/etc/mongodb.conf dbpath=/data/db logpath ...
- 使用 Docker 部署 TaleBook 私人书籍管理系统
1)项目介绍 GitHub:https://github.com/talebook/talebook Talebook 是一个简洁但强大的私人书籍管理系统.它基于 Calibre 项目构建,具备书籍管 ...
- minicube安装
minicube安装 一.安装手册: https://minikube.sigs.k8s.io/docs/start/ 二.安装 打开官网,选择和自己对应的系统和要下载的版本.点击下面的release ...
- fastposter v2.8.1 发布 电商海报生成器
fastposter v2.8.1 发布 电商海报生成器 fastposter海报生成器,电商海报编辑器,电商海报设计器,fast快速生成海报 海报制作 海报开发.二维码海报,图片海报,分享海报,二维 ...
- Protues的串口工具Virtual Terminal
用Protues来验证ARM的串口发送,有两种办法,一种是用Protues的串口工具VirtualTerminal 第二种是用串口助手(此种方法,需要下载并安装虚拟串口软件,然后用虚拟串口连接虚拟硬件 ...