1.去RegexKitLite下载类库,解压出来会有一个例子包及2个文件,其实用到的就这2个文件,添加到工程中。

2.工程中添加libicucore.dylib frameworks。

友情提醒:一般人导入RegexKitLite编译报错,正是因为没有导入这个类库,加上这个就OK了

3.现在所有的nsstring对象就可以调用RegexKitLite中的方法了。

NSString *email = @”kkk@aaa.com”;

[email isMatchedByRegex:@"\\b([a-zA-Z0-9%_.+\\-]+)@([a-zA-Z0-9.\\-]+?\\.[a-zA-Z]{2,6})\\b”];

返回YES,证明是email格式,需要注意的是RegexKitLite用到的正则表达式和wiki上的略有区别。

searchString = @”http://www.example.com:8080/index.html”;

regexString  = @”\\bhttps?://[a-zA-Z0-9\\-.]+(?::(\\d+))?(?:(?:/[a-zA-Z0-9\\-._?,'+\\&%$=~*!():@\\\\]*)+)?”;

NSInteger portInteger = [[searchString stringByMatching:regexString capture:1L] integerValue];

NSLog(@”portInteger: ‘%ld’”, (long)portInteger);

// 2008-10-15 08:52:52.500 host_port[8021:807] portInteger: ‘8080′

取string中http的例子。

下面给出常用的一些正则表达式(其实就是RegexKitLite官网上的,怕同鞋偷情不看)

CharacterDescription
\aMatch a BELL, \u0007
\AMatch at the beginning of the input. Differs from ^ in that \A will not match after a new-line within the input.
\b, outside of a [Set]Match if the current position is a word boundary. Boundaries occur at the transitions between word \w and non-word \W characters, with combining marks ignored.
See also: RKLUnicodeWordBoundaries
\b, within a [Set]Match a BACKSPACE, \u0008.
\BMatch if the current position is not a word boundary.
\cxMatch a Control-x character.
\dMatch any character with the Unicode General Category of Nd (Number, Decimal Digit).
\DMatch any character that is not a decimal digit.
\eMatch an ESCAPE, \u001B.
\ETerminates a \Q…\E quoted sequence.
\fMatch a FORM FEED, \u000C.
\GMatch if the current position is at the end of the previous match.
\nMatch a LINE FEED, \u000A.
\N{Unicode Character Name}Match the named Unicode Character.
\p{Unicode Property Name}Match any character with the specified Unicode Property.
\P{Unicode Property Name}Match any character not having the specified Unicode Property.
\QQuotes all following characters until \E.
\rMatch a CARRIAGE RETURN, \u000D.
\sMatch a white space character. White space is defined as [\t\n\f\r\p{Z}].
\SMatch a non-white space character.
\tMatch a HORIZONTAL TABULATION, \u0009.
\uhhhhMatch the character with the hex value hhhh.
\UhhhhhhhhMatch the character with the hex value hhhhhhhh. Exactly eight hex digits must be provided, even though the largest Unicode code point is \U0010ffff.
\wMatch a word character. Word characters are [\p{Ll}\p{Lu}\p{Lt}\p{Lo}\p{Nd}].
\WMatch a non-word character.
\x{h…}Match the character with hex value hhhh. From one to six hex digits may be supplied.
\xhhMatch the character with two digit hex value hh.
\XMatch a Grapheme Cluster.
\ZMatch if the current position is at the end of input, but before the final line terminator, if one exists.
\zMatch if the current position is at the end of input.
\nBack Reference. Match whatever the nth capturing group matched. n must be a number ≥ 1 and ≤ total number of capture groups in the pattern.Note:Octal escapes, such as \012, are not supported.
[pattern]Match any one character from the set. See ICU Regular Expression Character Classes for a full description of what may appear in the pattern.
.Match any character.
^Match at the beginning of a line.
$Match at the end of a line.
\Quotes the following character. Characters that must be quoted to be treated as literals are * ? + [ ( ) { } ^ $ | \ . /
OperatorsOperatorDescription
|Alternation. A|B matches either A or B.
*Match zero or more times. Match as many times as possible.
+Match one or more times. Match as many times as possible.
?Match zero or one times. Prefer one.
{n}Match exactly n times.
{n,}Match at least n times. Match as many times as possible.
{n,m}Match between n and m times. Match as many times as possible, but not more than m.
*?Match zero or more times. Match as few times as possible.
+?Match one or more times. Match as few times as possible.
??Match zero or one times. Prefer zero.
{n}?Match exactly n times.
{n,}?Match at least n times, but no more than required for an overall pattern match.
{n,m}?Match between n and m times. Match as few times as possible, but not less than n.
*+Match zero or more times. Match as many times as possible when first encountered, do not retry with fewer even if overall match fails. Possessive match.
++Match one or more times. Possessive match.
?+Match zero or one times. Possessive match.
{n}+Match exactly n times. Possessive match.
{n,}+Match at least n times. Possessive match.
{n,m}+Match between n and m times. Possessive match.
(…)Capturing parentheses. Range of input that matched the parenthesized subexpression is available after the match.
(?:…)Non-capturing parentheses. Groups the included pattern, but does not provide capturing of matching text. Somewhat more efficient than capturing parentheses.
(?>…)Atomic-match parentheses. First match of the parenthesized subexpression is the only one tried; if it does not lead to an overall pattern match, back up the search for a match to a position before the (?> .
(?#…)Free-format comment (?#comment).
(?=…)Look-ahead assertion. True if the parenthesized pattern matches at the current input position, but does not advance the input position.
(?!…)Negative look-ahead assertion. True if the parenthesized pattern does not match at the current input position. Does not advance the input position.
(?<=…)Look-behind assertion. True if the parenthesized pattern matches text preceding the current input position, with the last character of the match being the input character just before the current position. Does not alter the input position. The length of possible strings matched by the look-behind pattern must not be unbounded (no * or + operators).
(?<!…)Negative Look-behind assertion. True if the parenthesized pattern does not match text preceding the current input position, with the last character of the match being the input character just before the current position. Does not alter the input position. The length of possible strings matched by the look-behind pattern must not be unbounded (no * or + operators).
(?ismwx-ismwx:…)Flag settings. Evaluate the parenthesized expression with the specified flags enabled or -disabled.
(?ismwx-ismwx)Flag settings. Change the flag settings. Changes apply to the portion of the pattern following the setting. For example, (?i) changes to a case insensitive match.
See also: Regular Expression Options

同时需要注意的是转义字符哦~~在safari上复制会直接转换(网站蛮人性化的)

同时也提供了转换工具,safari测试支持,可能下载的时候有点慢,耐心等待,链接

RegexKitLite 使用详解的更多相关文章

  1. Linq之旅:Linq入门详解(Linq to Objects)

    示例代码下载:Linq之旅:Linq入门详解(Linq to Objects) 本博文详细介绍 .NET 3.5 中引入的重要功能:Language Integrated Query(LINQ,语言集 ...

  2. 架构设计:远程调用服务架构设计及zookeeper技术详解(下篇)

    一.下篇开头的废话 终于开写下篇了,这也是我写远程调用框架的第三篇文章,前两篇都被博客园作为[编辑推荐]的文章,很兴奋哦,嘿嘿~~~~,本人是个很臭美的人,一定得要截图为证: 今天是2014年的第一天 ...

  3. EntityFramework Core 1.1 Add、Attach、Update、Remove方法如何高效使用详解

    前言 我比较喜欢安静,大概和我喜欢研究和琢磨技术原因相关吧,刚好到了元旦节,这几天可以好好学习下EF Core,同时在项目当中用到EF Core,借此机会给予比较深入的理解,这里我们只讲解和EF 6. ...

  4. Java 字符串格式化详解

    Java 字符串格式化详解 版权声明:本文为博主原创文章,未经博主允许不得转载. 微博:厉圣杰 文中如有纰漏,欢迎大家留言指出. 在 Java 的 String 类中,可以使用 format() 方法 ...

  5. Android Notification 详解(一)——基本操作

    Android Notification 详解(一)--基本操作 版权声明:本文为博主原创文章,未经博主允许不得转载. 微博:厉圣杰 源码:AndroidDemo/Notification 文中如有纰 ...

  6. Android Notification 详解——基本操作

    Android Notification 详解 版权声明:本文为博主原创文章,未经博主允许不得转载. 前几天项目中有用到 Android 通知相关的内容,索性把 Android Notificatio ...

  7. Git初探--笔记整理和Git命令详解

    几个重要的概念 首先先明确几个概念: WorkPlace : 工作区 Index: 暂存区 Repository: 本地仓库/版本库 Remote: 远程仓库 当在Remote(如Github)上面c ...

  8. Drawable实战解析:Android XML shape 标签使用详解(apk瘦身,减少内存好帮手)

    Android XML shape 标签使用详解   一个android开发者肯定懂得使用 xml 定义一个 Drawable,比如定义一个 rect 或者 circle 作为一个 View 的背景. ...

  9. Node.js npm 详解

    一.npm简介 安装npm请阅读我之前的文章Hello Node中npm安装那一部分,不过只介绍了linux平台,如果是其它平台,有前辈写了更加详细的介绍. npm的全称:Node Package M ...

随机推荐

  1. JavaScript跨域解决办法

    在找到跨域解决办法之前,我们要先弄清楚一些基本概念 什么是跨域? 什么是“同源策略”? 跨文档消息通信 & 跨域请求数据 主域相同而子域不同 不同域名的跨域访问 什么是跨域? 简单地理解就是因 ...

  2. 深入理解计算机系统第二版习题解答CSAPP 2.9

    基于三元色R(红)G(绿)B(蓝)关闭(0)和打开(1),能够创建8种不同的颜色,如下: R G B 颜色 R G B 颜色 0 0 0 黑色 1 0 0 红色 0 0 1 蓝色 1 0 1 红紫色 ...

  3. Apache 配置多端口 多虚拟主机 局域网访问

    \wamp\bin\apache\Apache2.4.4\conf\extra\httpd-vhosts.conf 修改如下 NameVirtualHost *:80          Documen ...

  4. 45种Javascript技巧大全【转藏】

    JavaScript是一个绝冠全球的编程语言,可用于Web开发.移动应用开发(PhoneGap.Appcelerator).服务器端开发(Node.js和Wakanda)等等.JavaScript还是 ...

  5. 腾讯海量数据处理平台TDW

    TDW是腾讯海量数据处理平台中最核心的模块,它有以下几个作用: 提供海量的离线计算和存储服务.TDW是腾讯内部规模最大的离线数据处理平台,公司内大多数业务的产品报表.运营分析.数据挖掘等的存储和计算都 ...

  6. iis的路径

    每次打开iis管理器查看iis指定路径下的文件过于麻烦,而且iis管理器耗资源,以下是iis的路径,以及其对应在本地磁盘的地址 SP2013\Sites\SharePoint - 80\_contro ...

  7. iOS toolbar

    初学ios,对toolbar初步了解: self.navigationItem.title=@"显示工具栏"; // 显示工具栏 //self.navigationControll ...

  8. Windows Server 2008安装Memcached笔记

    分布式缓存系统Memcached简介与实践 缘起: 在数据驱动的web开发中,经常要重复从数据库中取出相同的数据,这种重复极大的增加了数据库负载.缓存是解决这个问题的好办法.但是ASP.NET中的虽然 ...

  9. 使用PDO连接多种数据库

    在PHP 5之前,想要连接MySQL数据库就需要使用mysql或mysqli等一系列函数来操作数据库.例如,我们使用mysql系列数据库函数进行查询操作,对应的示例代码如下: <?php //创 ...

  10. gdal中文路径无法打开问题

    在C#中使用OGR读写矢量数据时,需要引用“using OSGeo.OGR;”. 同时为了处理中文路径和中文字段,需要在开始设置下面两个属性,代码如下: //为了支持中文路径,请添加下面这句代码(大多 ...