I.MX6 MAC Address 导致的系统崩溃
/****************************************************************************
* I.MX6 MAC Address 导致的系统崩溃
* 说明：
* 修改了I.MX6的MAC地址之后，忘了提前设置好MAC地址，结果系统崩溃了，通过
* Logcat能看到更多的详细信息，这里就不贴出来了。
*
* 2016-7-26 深圳 南山平山村 曾剑锋
***************************************************************************/ 一、错误现象
warning: `zygote' uses 32-bit capabilities (legacy support in use)
request_suspend_state: wakeup (->) at (-- ::07.704740003 UTC)
cpufreq_interactive_input_connect: connect to AR1020 Touchscreen
acc_open
acc_release
ehci_fsl_bus_resume begins, DR
binder: : binder_alloc_buf failed to map pages in userspace, no vma
binder: : transaction failed , size -
binder: release : transaction in, still active
binder: send failed reply for transaction to :
binder: release : transaction in, still active
binder: send failed reply for transaction to :
binder: : transaction failed , size -
alarm_release: clear alarm, pending
alarm_release: clear alarm, pending
request_suspend_state: wakeup (->) at (-- ::11.919383336 UTC)
init: untracked pid exited
init: untracked pid exited
init: untracked pid exited
init: untracked pid exited
ERROR: v4l2 capture: slave not found!
ERROR: v4l2 capture: slave not found!
ERROR: v4l2 capture: slave not found!
ERROR: v4l2 capture: slave not found!
ERROR: v4l2 capture: slave not found!
ERROR: v4l2 capture: slave not found!
ERROR: v4l2 capture: slave not found!
ERROR: v4l2 capture: slave not found!
request_suspend_state: wakeup (->) at (-- ::16.192728336 UTC)
acc_open
acc_release
SysRq : Show Blocked State
task PC stack pid father
ipu1_task D c06a0454 0x00000000
[<c06a0454>] (__schedule+0x3f0/0x960) from [<c046198c>] (ipu_task_thread+0x954/0xe20)
[<c046198c>] (ipu_task_thread+0x954/0xe20) from [<c00ab9a8>] (kthread+0x80/0x88)
[<c00ab9a8>] (kthread+0x80/0x88) from [<c004c408>] (kernel_thread_exit+0x0/0x8)
ipu1_task D c06a0454 0x00000000
[<c06a0454>] (__schedule+0x3f0/0x960) from [<c046198c>] (ipu_task_thread+0x954/0xe20)
[<c046198c>] (ipu_task_thread+0x954/0xe20) from [<c00ab9a8>] (kthread+0x80/0x88)
[<c00ab9a8>] (kthread+0x80/0x88) from [<c004c408>] (kernel_thread_exit+0x0/0x8)
Sched Debug Version: v0., 3.0. #
ktime : 113452.441349
sched_clk : 113623.728013
cpu_clk : 113623.728679
jiffies : sysctl_sched
.sysctl_sched_latency : 10.000000
.sysctl_sched_min_granularity : 1.500000
.sysctl_sched_wakeup_granularity : 2.000000
.sysctl_sched_child_runs_first :
.sysctl_sched_features :
.sysctl_sched_tunable_scaling : (logaritmic) cpu#
.nr_running :
.load :
.nr_switches :
.nr_load_updates :
.nr_uninterruptible :
.next_balance : 4294.948640
.curr->pid :
.clock : 113701.338679
.cpu_load[] :
.cpu_load[] :
.cpu_load[] :
.cpu_load[] :
.cpu_load[] :
.yld_count :
.sched_switch :
.sched_count :
.sched_goidle :
.avg_idle :
.ttwu_count :
.ttwu_local : cfs_rq[]:/apps
.exec_clock : 2759.142373
.MIN_vruntime : 0.000001
.min_vruntime : 3436.651263
.max_vruntime : 0.000001
.spread : 0.000000
.spread0 : -20161.851361
.nr_spread_over :
.nr_running :
.load :
.load_avg : 0.000000
.load_period : 9.999999
.load_contrib :
.load_tg :
.se->exec_start : 113701.335013
.se->vruntime : 23598.502624
.se->sum_exec_runtime : 2759.148706
.se->statistics.wait_start : 0.000000
.se->statistics.sleep_start : 0.000000
.se->statistics.block_start : 0.000000
.se->statistics.sleep_max : 0.000000
.se->statistics.block_max : 0.000000
.se->statistics.exec_max : 10.014667
.se->statistics.slice_max : 7.352333
.se->statistics.wait_max : 8.682667
.se->statistics.wait_sum : 264.644972
.se->statistics.wait_count :
.se->load.weight : cfs_rq[]:/
.exec_clock : 12482.048976
.MIN_vruntime : 0.000001
.min_vruntime : 23598.502624
.max_vruntime : 0.000001
.spread : 0.000000
.spread0 : 0.000000
.nr_spread_over :
.nr_running :
.load :
.load_avg : 0.000000
.load_period : 0.000000
.load_contrib :
.load_tg : rt_rq[]:/apps/bg_non_interactive
.rt_nr_running :
.rt_throttled :
.rt_time : 0.000000
.rt_runtime : 700.000000 rt_rq[]:/apps
.rt_nr_running :
.rt_throttled :
.rt_time : 0.000000
.rt_runtime : 800.000000 rt_rq[]:/
.rt_nr_running :
.rt_throttled :
.rt_time : 0.000000
.rt_runtime : 950.000000 runnable tasks:
task PID tree-key switches prio exec-runtime sum-exec sum-sleep
---------------------------------------------------------------------------------------------------------- cpu#
.nr_running :
.load :
.nr_switches :
.nr_load_updates :
.nr_uninterruptible :
.next_balance : 4294.948644
.curr->pid :
.clock : 113561.468346
.cpu_load[] :
.cpu_load[] :
.cpu_load[] :
.cpu_load[] :
.cpu_load[] :
.yld_count :
.sched_switch :
.sched_count :
.sched_goidle :
.avg_idle :
.ttwu_count :
.ttwu_local : cfs_rq[]:/apps
.exec_clock : 2663.667650
.MIN_vruntime : 0.000001
.min_vruntime : 3128.090604
.max_vruntime : 0.000001
.spread : 0.000000
.spread0 : -20470.431114
.nr_spread_over :
.nr_running :
.load :
.load_avg : 10124.628992
.load_period : 9.887333
.load_contrib :
.load_tg :
.se->exec_start : 113561.468346
.se->vruntime : 15696.508707
.se->sum_exec_runtime : 2663.667650
.se->statistics.wait_start : 0.000000
.se->statistics.sleep_start : 0.000000
.se->statistics.block_start : 0.000000
.se->statistics.sleep_max : 0.000000
.se->statistics.block_max : 0.000000
.se->statistics.exec_max : 10.003334
.se->statistics.slice_max : 10.320667
.se->statistics.wait_max : 9.957667
.se->statistics.wait_sum : 186.940998
.se->statistics.wait_count :
.se->load.weight : cfs_rq[]:/
.exec_clock : 5726.917278
.MIN_vruntime : 0.000001
.min_vruntime : 15696.508707
.max_vruntime : 0.000001
.spread : 0.000000
.spread0 : -7902.013011
.nr_spread_over :
.nr_running :
.load :
.load_avg : 0.000000
.load_period : 0.000000
.load_contrib :
.load_tg : rt_rq[]:/apps/bg_non_interactive
.rt_nr_running :
.rt_throttled :
.rt_time : 0.000000
.rt_runtime : 700.000000 rt_rq[]:/apps
.rt_nr_running :
.rt_throttled :
.rt_time : 0.000000
.rt_runtime : 800.000000 rt_rq[]:/
.rt_nr_running :
.rt_throttled :
.rt_time : 0.127000
.rt_runtime : 950.000000 runnable tasks:
task PID tree-key switches prio exec-runtime sum-exec sum-sleep
----------------------------------------------------------------------------------------------------------
R watchdog 3128.090604 3128.090604 40.609997 93720.891012 /apps binder: release : transaction in, still active
binder: send failed reply for transaction to :
binder: release : transaction in, still active
binder: send failed reply for transaction to :
binder: release : transaction in, still active
binder: send failed reply for transaction to :
alarm_release: clear alarm, pending
request_suspend_state: wakeup (->) at (-- ::53.399284015 UTC)
init: untracked pid exited
init: untracked pid exited
init: untracked pid exited
ERROR: v4l2 capture: slave not found!
ERROR: v4l2 capture: slave not found!
ERROR: v4l2 capture: slave not found!
ERROR: v4l2 capture: slave not found!
ERROR: v4l2 capture: slave not found!
ERROR: v4l2 capture: slave not found!
ERROR: v4l2 capture: slave not found!
ERROR: v4l2 capture: slave not found!
request_suspend_state: wakeup (->) at (-- ::57.663358016 UTC)
acc_open
acc_release
binder: release : transaction in, still active
binder: send failed reply for transaction to :
binder: release : transaction in, still active
binder: send failed reply for transaction to :
binder: release : transaction in, still active
binder: send failed reply for transaction to :
binder: release : transaction in, still active
binder: send failed reply for transaction to :
binder: send failed reply for transaction to :
binder: release proc , transaction , not freed
binder: : transaction failed , size -
binder: : transaction failed , size -
binder: : transaction failed , size -
alarm_release: clear alarm, pending
alarm_release: clear alarm, pending
request_suspend_state: wakeup (->) at (-- ::00.089045682 UTC)
init: untracked pid exited
init: untracked pid exited
init: untracked pid exited
init: untracked pid exited
ERROR: v4l2 capture: slave not found!
ERROR: v4l2 capture: slave not found!
ERROR: v4l2 capture: slave not found!
ERROR: v4l2 capture: slave not found!
ERROR: v4l2 capture: slave not found!
ERROR: v4l2 capture: slave not found!
ERROR: v4l2 capture: slave not found!
ERROR: v4l2 capture: slave not found!
request_suspend_state: wakeup (->) at (-- ::04.248906349 UTC)
acc_open
acc_release
binder: release : transaction in, still active
binder: send failed reply for transaction to :
binder: release : transaction in, still active
binder: send failed reply for transaction to :
binder: release : transaction in, still active
binder: send failed reply for transaction to :
binder: release : transaction in, still active
binder: send failed reply for transaction to :
binder: send failed reply for transaction to :
binder: : transaction failed , size -
binder: : transaction failed , size -
binder: : transaction failed , size -
alarm_release: clear alarm, pending
alarm_release: clear alarm, pending
request_suspend_state: wakeup (->) at (-- ::06.638955350 UTC)
init: untracked pid exited
init: untracked pid exited
init: untracked pid exited
init: untracked pid exited
ERROR: v4l2 capture: slave not found!
ERROR: v4l2 capture: slave not found!
ERROR: v4l2 capture: slave not found!
ERROR: v4l2 capture: slave not found!
ERROR: v4l2 capture: slave not found!
ERROR: v4l2 capture: slave not found!
ERROR: v4l2 capture: slave not found!
ERROR: v4l2 capture: slave not found!
request_suspend_state: wakeup (->) at (-- ::10.749826017 UTC)
acc_open
acc_release
binder: release : transaction in, still active
binder: send failed reply for transaction to :
binder: release : transaction in, still active
binder: send failed reply for transaction to :
binder: release : transaction in, still active
binder: send failed reply for transaction to :
binder: send failed reply for transaction to :
binder: send failed reply for transaction to :
binder: send failed reply for transaction to :
binder: : transaction failed , size -
binder: : transaction failed , size -
binder: : transaction failed , size -
binder: : transaction failed , size -
binder: : transaction failed , size -
alarm_release: clear alarm, pending
alarm_release: clear alarm, pending
request_suspend_state: wakeup (->) at (-- ::13.558928351 UTC)
init: untracked pid exited
init: untracked pid exited
init: untracked pid exited
init: untracked pid exited
ERROR: v4l2 capture: slave not found!
ERROR: v4l2 capture: slave not found!
ERROR: v4l2 capture: slave not found!
ERROR: v4l2 capture: slave not found!
ERROR: v4l2 capture: slave not found!
ERROR: v4l2 capture: slave not found!
ERROR: v4l2 capture: slave not found!
ERROR: v4l2 capture: slave not found! 二、导致错误的原因：
未设置正确的MAC地址。 三、解决办法：
设置好MAC地址。
I.MX6 MAC Address 导致的系统崩溃的更多相关文章
- I.MX6 MAC Address hacking
/************************************************************************** * I.MX6 MAC Address hack ...
- linux Kernell crash dump------kdump 的安装设置+Linux系统崩溃的修复解决过程+mysql+kvm
http://www.ibm.com/developerworks/cn/linux/l-cn-dumpanalyse/https://www.kernel.org/pub/linux/utils/k ...
- 记一次系统崩溃事件【Mac版】
事件:Mac系统崩溃,导致电脑数据丢失,以及数据安全备份措施的不到位的教训! 解决措施: 1.开机后按:Command+R 按开机键 ,进入Mac 实用工具, 选择磁盘工具.由于没有备份直接抹掉磁盘. ...
- RHEL6误安装RHEL7的包导致glibc被升级后系统崩溃处理方法
RHEL6误使用了RHEL7的光盘源,安装了某个RPM包之后,导致glibc被升级,进而导致系统崩溃. [root@rhel65 ~]# yum install ftp Loaded plugin ...
- I.MX6 Ethernet MAC (ENET) MAC Address hacking
/********************************************************************* * I.MX6 Ethernet MAC (ENET) M ...
- I.MX6 U-boot imxotp MAC address 写入
/***************************************************************************** * I.MX6 U-boot imxotp ...
- Mac制作U盘系统(OS X El Capitan)教程
前言部分 重装过Mac OS X系统的人应该都深有体会,通过自带的重新安装 Mac OS X功能恢复系统(开机时按Command+R) 要耗费10几个小时才能完成(请求苹果国外服务器),但如果通过U盘 ...
- Linux系统崩溃，数据迁移
就在1小时前,处理了件如标题所述的麻烦事儿.吃完午饭,想对此作个总结,一来自己梳理下过程以便后面遇见类似的事可以 快速处理,二来同行的小伙伴们可以探讨下.故事是这样的,公司所在园区物业晚上断电8小时, ...
- ArcGIS for Android 10.1.1API 中文标注导致程序异常崩溃问题
1.前言 问题:在部分Android机型中使用ArcGIS for Android 10.1.1 API 中文标注导致程序异常崩溃. 说明:手里有两台机器一台是Nexus4,原生系统,版本4.4.4, ...
随机推荐
- python019 Python3 File(文件) 方法
file 对象使用 open 函数来创建,下表列出了 file 对象常用的函数: 序号 方法及描述 1 file.close() 关闭文件.关闭后文件不能再进行读写操作. 2 file.flush() ...
- Android渲染器Shader：梯度渐变扫描渲染器SweepGradient（二）
Android渲染器Shader:梯度渐变扫描渲染器SweepGradient(二) 附录文章1介绍了线性渐变渲染器. Android的SweepGradient梯度渐变扫描,重点是在构造Swe ...
- 【数据传输 2】批量导入的前奏：将Excel表中的数据转换为DataTable类型
导读:我们知道,在数据库中,数据集DataSet是由多张DataTable表组成.所以,如果我们需要将数据从外部导入到数据库中,那么要做的很重要的一步是将这些数据转换为数据库可以接受的结构.今天在用S ...
- B/S 开发和 C/S开发的区别
导读:每天都从应用中心下载很多软件安装尝试,在自己的电脑上也装了很多软件,但是,就出现了一个问题,好比QQ,为什么有了APP,还要有网站应用呢?由此,结合到自己的学习,就衍生出一个问题:C/S 开发就 ...
- Linux vi替换字符串
1. 基本的替换 :s/vivian/sky/ 替换当前行第一个 vivian 为 sky :s/vivian/sky/g 替换当前行所有 vivian 为 sky :n,$s/vivian/sky/ ...
- [codeforces538D]Weird Chess
[codeforces538D]Weird Chess 试题描述 Igor has been into chess for a long time and now he is sick of the ...
- POJ3321Apple Tree【dfs 树状数组】
题目大意:一棵树(不一定是二叉树!!),树的节点上本来都有一个苹果,要求完成以下操作: 1.指定某个节点,如果这个节点原本有苹果则拿去,如果没有苹果则填上一个苹果 2.询问某个节点以及其子树一共有多少 ...
- [转]maven编译时出现读取XXX时出错invalid LOC header (bad signature)
maven编译时出现读取XXX时出错invalid LOC header (bad signature) 一.发现问题右击pom.xml,run as —> maven install,会看到c ...
- ISAPI映射路径错误，导致K3Cloud打不开。
今天一个同事说她的K3Cloud打不开,一看是页面报500错误,具体信息看图片: 问题: ISAPI配置的映射路径错了,多了个反斜线. 解决办法: 在IIS管理器中找到ISAPI筛选器,删除掉就行了.
- msp430项目编程13
msp430中项目---温湿度检测系统 1.dht11工作原理 2.电路原理说明 3.代码(显示部分) 4.代码(功能实现) 5.项目总结 msp430项目编程 msp430入门学习