Android View绘制过程
Android的View绘制是从根节点（Activity是DecorView）开始，他是一个自上而下的过程。View的绘制经历三个过程：Measure、Layout、Draw。基本流程如下图：
performTraversals函数，具体的可以参考一下源代码：
private void performTraversals() {
final View host = mView;
...
host.measure(childWidthMeasureSpec, childHeightMeasureSpec);
...
host.layout(0, 0, host.getMeasuredWidth(), host.getMeasuredHeight());
...
draw(fullRedrawNeeded);
}
1、Measure过程
Measure过程是计算视图大小，View中视图measure过程相关的方法主要有三个：
public final void measure(int widthMeasureSpec, int heightMeasureSpec)
protected final void setMeasuredDimension(int measuredWidth, int measuredHeight)
protected void onMeasure(int widthMeasureSpec, int heightMeasureSpec)
measure调用onMeasure，onMeasure调用setMeasureDimension，measure，setMeasureDimension是final类型，view的子类不需要重写，onMeasure在view的子类中重写。
measure函数：
public final void measure(int widthMeasureSpec, int heightMeasureSpec) {
if ((mPrivateFlags & FORCE_LAYOUT) == FORCE_LAYOUT ||
widthMeasureSpec != mOldWidthMeasureSpec ||
heightMeasureSpec != mOldHeightMeasureSpec) {
// first clears the measured dimension flag
mPrivateFlags &= ~MEASURED_DIMENSION_SET;
if (ViewDebug.TRACE_HIERARCHY) {
ViewDebug.trace(this, ViewDebug.HierarchyTraceType.ON_MEASURE);
}
// measure ourselves, this should set the measured dimension flag back
onMeasure(widthMeasureSpec, heightMeasureSpec);
// flag not set, setMeasuredDimension() was not invoked, we raise
// an exception to warn the developer
if ((mPrivateFlags & MEASURED_DIMENSION_SET) != MEASURED_DIMENSION_SET) {
throw new IllegalStateException("onMeasure() did not set the"
+ " measured dimension by calling"
+ " setMeasuredDimension()");
}
mPrivateFlags |= LAYOUT_REQUIRED;
}
mOldWidthMeasureSpec = widthMeasureSpec;
mOldHeightMeasureSpec = heightMeasureSpec;
}
onMeasure函数：
protected void onMeasure(int widthMeasureSpec, int heightMeasureSpec) {
setMeasuredDimension(getDefaultSize(getSuggestedMinimumWidth(), widthMeasureSpec),
getDefaultSize(getSuggestedMinimumHeight(), heightMeasureSpec));
}
重写onMeasure时，要调用setMeasuredDimension或者super.onMeasure来设置自身的mMeasuredWidth和mMeasuredHeight，否则，就会抛出异常.
setMeasuredDimension函数，用来设置view的大小：
protected final void setMeasuredDimension(int measuredWidth, int measuredHeight) {
mMeasuredWidth = measuredWidth;
mMeasuredHeight = measuredHeight;
mPrivateFlags |= MEASURED_DIMENSION_SET;
}
再看一下onMeasure的getDefaultSize函数：
public static int getDefaultSize(int size, int measureSpec) {
int result = size;
int specMode = MeasureSpec.getMode(measureSpec);
int specSize = MeasureSpec.getSize(measureSpec);
switch (specMode) {
case MeasureSpec.UNSPECIFIED:
result = size;
break;
case MeasureSpec.AT_MOST:
case MeasureSpec.EXACTLY:
result = specSize;
break;
}
return result;
}
这里用引入了MeasureSpec类：
public static class MeasureSpec {
private static final int MODE_SHIFT = 30;
private static final int MODE_MASK = 0x3 << MODE_SHIFT;
public static final int UNSPECIFIED = 0 << MODE_SHIFT;
public static final int EXACTLY = 1 << MODE_SHIFT;
public static final int AT_MOST = 2 << MODE_SHIFT;
public static int makeMeasureSpec(int size, int mode) {
return size + mode;
}
public static int getMode(int measureSpec) {
return (measureSpec & MODE_MASK);
}
public static int getSize(int measureSpec) {
return (measureSpec & ~MODE_MASK);
}
}
MODE_MASK为30为长度的二进制数，前两位标示Mode，后面的标示Size。MeasureSpec有三种模式分别是UNSPECIFIED, EXACTLY和AT_MOST。
EXACTLY表示父视图希望子视图的大小应该是由specSize的值来决定的，系统默认会按照这个规则来设置子视图的大小，开发人员当然也可以按照自己的意愿设置成任意的大小。
AT_MOST表示子视图最多只能是specSize中指定的大小，开发人员应该尽可能小得去设置这个视图，并且保证不会超过specSize。系统默认会按照这个规则来设置子视图的大小，开发人员当然也可以按照自己的意愿设置成任意的大小。
UNSPECIFIED表示开发人员可以将视图按照自己的意愿设置成任意的大小，没有任何限制。这种情况比较少见，不太会用到。
widthMeasureSpec和heightMeasureSpec决定了Mode和Size的值，widthMeasureSpec和heightMeasureSpec来自父视图，这两个值都是由父视图经过计算后传递给子视图的，说明父视图会在一定程度上决定子视图的大小。但是最外层的根视图，它的widthMeasureSpec和heightMeasureSpec又是从哪里得到的呢？这就需要去分析ViewRoot中的源码了，观察performTraversals()方法可以发现如下代码：
childWidthMeasureSpec = getRootMeasureSpec(desiredWindowWidth, lp.width);
childHeightMeasureSpec = getRootMeasureSpec(desiredWindowHeight, lp.height);
可以看到，这里调用了getRootMeasureSpec()方法去获取widthMeasureSpec和heightMeasureSpec的值，注意方法中传入的参数，其中lp.width和lp.height在创建ViewGroup实例的时候就被赋值了，它们都等于MATCH_PARENT。然后看下getRootMeasureSpec()方法中的代码，如下所示：
private int getRootMeasureSpec(int windowSize, int rootDimension) {
int measureSpec;
switch (rootDimension) {
case ViewGroup.LayoutParams.MATCH_PARENT:
measureSpec = MeasureSpec.makeMeasureSpec(windowSize, MeasureSpec.EXACTLY);
break;
case ViewGroup.LayoutParams.WRAP_CONTENT:
measureSpec = MeasureSpec.makeMeasureSpec(windowSize, MeasureSpec.AT_MOST);
break;
default:
measureSpec = MeasureSpec.makeMeasureSpec(rootDimension, MeasureSpec.EXACTLY);
break;
}
return measureSpec;
}
可以看到，这里使用了MeasureSpec.makeMeasureSpec()方法来组装一个MeasureSpec，当rootDimension参数等于MATCH_PARENT的时候，MeasureSpec的specMode就等于EXACTLY，当rootDimension等于WRAP_CONTENT的时候，MeasureSpec的specMode就等于AT_MOST。并且MATCH_PARENT和WRAP_CONTENT时的specSize都是等于windowSize的，也就意味着根视图总是会充满全屏的。
Measure是一个复杂的过程，因为一个布局中一般都会包含多个子视图，每个视图都需要经历一次measure过程。ViewGroup中定义了一个measureChildren()方法来去测量子视图的大小，如下所示：
protected void measureChildren(int widthMeasureSpec, int heightMeasureSpec) {
final int size = mChildrenCount;
final View[] children = mChildren;
for (int i = 0; i < size; ++i) {
final View child = children[i];
if ((child.mViewFlags & VISIBILITY_MASK) != GONE) {
measureChild(child, widthMeasureSpec, heightMeasureSpec);
}
}
}
这里会去遍历当前布局下的所有子视图，然后逐个调用measureChild()方法来测量相应子视图的大小：
protected void measureChild(View child, int parentWidthMeasureSpec,
int parentHeightMeasureSpec) {
final LayoutParams lp = child.getLayoutParams(); final int childWidthMeasureSpec = getChildMeasureSpec(parentWidthMeasureSpec,
mPaddingLeft + mPaddingRight, lp.width);
final int childHeightMeasureSpec = getChildMeasureSpec(parentHeightMeasureSpec,
mPaddingTop + mPaddingBottom, lp.height); child.measure(childWidthMeasureSpec, childHeightMeasureSpec);
}
从这里我们可以看到视图的大小是由父视图和子视图共同决定的。子布局里面的android:layout_width和android:layout_height只是期望值，父View大小最终是由DecorView决定。父视图提供尺寸大小的一个能力，子视图最终尺寸与父视图能力、子视图期望的关系如下：
|
父视图能力尺寸 |
子视图期望尺寸 |
子视图最终允许尺寸 |
|
EXACTLY + Size1 |
EXACTLY + Size2 |
EXACTLY + Size2 |
|
EXACTLY + Size1 |
fill_parent/match_parent |
EXACTLY+Size1 |
|
EXACTLY + Size1 |
wrap_content |
AT_MOST+Size1 |
|
AT_MOST+Size1 |
EXACTLY + Size2 |
EXACTLY+Size2 |
|
AT_MOST+Size1 |
fill_parent/match_parent |
AT_MOST+Size1 |
|
AT_MOST+Size1 |
wrap_content |
AT_MOST+Size1 |
|
UNSPECIFIED+Size1 |
EXACTLY + Size2 |
EXACTLY + Size2 |
|
UNSPECIFIED+Size1 |
fill_parent/match_parent |
UNSPECIFIED+0 |
|
UNSPECIFIED+Size1 |
wrap_content |
UNSPECIFIED+0 |
关于视图的measure过程可以阅读以下LinearLayout源码，这样可以更清楚的了解过程。
2、Layout过程
measure过程确定视图的大小，而layout过程确定视图的位置。loyout是从view的layout方法开始的：
public void layout(int l, int t, int r, int b) {
int oldL = mLeft;
int oldT = mTop;
int oldB = mBottom;
int oldR = mRight;
boolean changed = setFrame(l, t, r, b);
if (changed || (mPrivateFlags & PFLAG_LAYOUT_REQUIRED) == PFLAG_LAYOUT_REQUIRED) {
onLayout(changed, l, t, r, b);
mPrivateFlags &= ~PFLAG_LAYOUT_REQUIRED;
ListenerInfo li = mListenerInfo;
if (li != null && li.mOnLayoutChangeListeners != null) {
ArrayList<OnLayoutChangeListener> listenersCopy =
(ArrayList<OnLayoutChangeListener>)li.mOnLayoutChangeListeners.clone();
int numListeners = listenersCopy.size();
for (int i = 0; i < numListeners; ++i) {
listenersCopy.get(i).onLayoutChange(this, l, t, r, b, oldL, oldT, oldR, oldB);
}
}
}
mPrivateFlags &= ~PFLAG_FORCE_LAYOUT;
}
函数中参数l、t、r、b是指view的左、上、右、底的位置，这几个参数是父视图传入的，而根视图中参数是由performTraversals()方法传入的。
host.layout(0, 0, host.mMeasuredWidth, host.mMeasuredHeight);
layout中调用了onLayout方法，在view中onLayout方法是一个空函数，他需要其子类实现。
protected void onLayout(boolean changed, int left, int top, int right, int bottom) {
}
我们关注一下LinearLayout：
@Override
protected void onLayout(boolean changed, int l, int t, int r, int b) {
if (mOrientation == VERTICAL) {
layoutVertical();
} else {
layoutHorizontal();
}
}
void layoutVertical() {
final int paddingLeft = mPaddingLeft;
int childTop;
int childLeft;
// Where right end of child should go
final int width = mRight - mLeft;
int childRight = width - mPaddingRight;
// Space available for child
int childSpace = width - paddingLeft - mPaddingRight;
final int count = getVirtualChildCount();
final int majorGravity = mGravity & Gravity.VERTICAL_GRAVITY_MASK;
final int minorGravity = mGravity & Gravity.RELATIVE_HORIZONTAL_GRAVITY_MASK;
switch (majorGravity) {
case Gravity.BOTTOM:
// mTotalLength contains the padding already
childTop = mPaddingTop + mBottom - mTop - mTotalLength;
break;
// mTotalLength contains the padding already
case Gravity.CENTER_VERTICAL:
childTop = mPaddingTop + (mBottom - mTop - mTotalLength) / 2;
break;
case Gravity.TOP:
default:
childTop = mPaddingTop;
break;
}
for (int i = 0; i < count; i++) {
final View child = getVirtualChildAt(i);
if (child == null) {
childTop += measureNullChild(i);
} else if (child.getVisibility() != GONE) {
final int childWidth = child.getMeasuredWidth();
final int childHeight = child.getMeasuredHeight();
final LinearLayout.LayoutParams lp =
(LinearLayout.LayoutParams) child.getLayoutParams();
int gravity = lp.gravity;
if (gravity < 0) {
gravity = minorGravity;
}
final int layoutDirection = getLayoutDirection();
final int absoluteGravity = Gravity.getAbsoluteGravity(gravity, layoutDirection);
switch (absoluteGravity & Gravity.HORIZONTAL_GRAVITY_MASK) {
case Gravity.CENTER_HORIZONTAL:
childLeft = paddingLeft + ((childSpace - childWidth) / 2)
+ lp.leftMargin - lp.rightMargin;
break;
case Gravity.RIGHT:
childLeft = childRight - childWidth - lp.rightMargin;
break;
case Gravity.LEFT:
default:
childLeft = paddingLeft + lp.leftMargin;
break;
}
if (hasDividerBeforeChildAt(i)) {
childTop += mDividerHeight;
}
childTop += lp.topMargin;
setChildFrame(child, childLeft, childTop + getLocationOffset(child),
childWidth, childHeight);
childTop += childHeight + lp.bottomMargin + getNextLocationOffset(child);
i += getChildrenSkipCount(child, i);
}
}
}
layout设置了view的位置，还设置了子视图位置，layoutHorizontal()方法中调用了setChildFrame方法：
private void setChildFrame(View child, int left, int top, int width, int height) {
child.layout(left, top, left + width, top + height);
}
从上面看出，layout也是一个自上而下的过程，先设置父视图位置，在循环子视图，父视图位置一定程度上决定了子视图位置。
3、Draw过程
draw过程调用顺序在measure()和layout()之后，同样的，performTraversals()发起的draw过程最终会调用到mView的draw()函数，这里的mView对于Activity来说就是PhoneWindow.DecorView。看一下view类的draw方法：
public void draw(Canvas canvas) {
final int privateFlags = mPrivateFlags;
final boolean dirtyOpaque = (privateFlags & PFLAG_DIRTY_MASK) == PFLAG_DIRTY_OPAQUE &&
(mAttachInfo == null || !mAttachInfo.mIgnoreDirtyState);
mPrivateFlags = (privateFlags & ~PFLAG_DIRTY_MASK) | PFLAG_DRAWN;
/*
* Draw traversal performs several drawing steps which must be executed
* in the appropriate order:
*
* 1. Draw the background
* 2. If necessary, save the canvas' layers to prepare for fading
* 3. Draw view's content
* 4. Draw children
* 5. If necessary, draw the fading edges and restore layers
* 6. Draw decorations (scrollbars for instance)
*/
// Step 1, draw the background, if needed
int saveCount;
if (!dirtyOpaque) {
final Drawable background = mBackground;
if (background != null) {
final int scrollX = mScrollX;
final int scrollY = mScrollY;
if (mBackgroundSizeChanged) {
background.setBounds(0, 0, mRight - mLeft, mBottom - mTop);
mBackgroundSizeChanged = false;
}
if ((scrollX | scrollY) == 0) {
background.draw(canvas);
} else {
canvas.translate(scrollX, scrollY);
background.draw(canvas);
canvas.translate(-scrollX, -scrollY);
}
}
}
// skip step 2 & 5 if possible (common case)
final int viewFlags = mViewFlags;
boolean horizontalEdges = (viewFlags & FADING_EDGE_HORIZONTAL) != 0;
boolean verticalEdges = (viewFlags & FADING_EDGE_VERTICAL) != 0;
if (!verticalEdges && !horizontalEdges) {
// Step 3, draw the content
if (!dirtyOpaque) onDraw(canvas);
// Step 4, draw the children
dispatchDraw(canvas);
// Step 6, draw decorations (scrollbars)
onDrawScrollBars(canvas);
// we're done...
return;
}
/*
* Here we do the full fledged routine...
* (this is an uncommon case where speed matters less,
* this is why we repeat some of the tests that have been
* done above)
*/
boolean drawTop = false;
boolean drawBottom = false;
boolean drawLeft = false;
boolean drawRight = false;
float topFadeStrength = 0.0f;
float bottomFadeStrength = 0.0f;
float leftFadeStrength = 0.0f;
float rightFadeStrength = 0.0f;
// Step 2, save the canvas' layers
int paddingLeft = mPaddingLeft;
final boolean offsetRequired = isPaddingOffsetRequired();
if (offsetRequired) {
paddingLeft += getLeftPaddingOffset();
}
int left = mScrollX + paddingLeft;
int right = left + mRight - mLeft - mPaddingRight - paddingLeft;
int top = mScrollY + getFadeTop(offsetRequired);
int bottom = top + getFadeHeight(offsetRequired);
if (offsetRequired) {
right += getRightPaddingOffset();
bottom += getBottomPaddingOffset();
}
final ScrollabilityCache scrollabilityCache = mScrollCache;
final float fadeHeight = scrollabilityCache.fadingEdgeLength;
int length = (int) fadeHeight;
// clip the fade length if top and bottom fades overlap
// overlapping fades produce odd-looking artifacts
if (verticalEdges && (top + length > bottom - length)) {
length = (bottom - top) / 2;
}
// also clip horizontal fades if necessary
if (horizontalEdges && (left + length > right - length)) {
length = (right - left) / 2;
}
if (verticalEdges) {
topFadeStrength = Math.max(0.0f, Math.min(1.0f, getTopFadingEdgeStrength()));
drawTop = topFadeStrength * fadeHeight > 1.0f;
bottomFadeStrength = Math.max(0.0f, Math.min(1.0f, getBottomFadingEdgeStrength()));
drawBottom = bottomFadeStrength * fadeHeight > 1.0f;
}
if (horizontalEdges) {
leftFadeStrength = Math.max(0.0f, Math.min(1.0f, getLeftFadingEdgeStrength()));
drawLeft = leftFadeStrength * fadeHeight > 1.0f;
rightFadeStrength = Math.max(0.0f, Math.min(1.0f, getRightFadingEdgeStrength()));
drawRight = rightFadeStrength * fadeHeight > 1.0f;
}
saveCount = canvas.getSaveCount();
int solidColor = getSolidColor();
if (solidColor == 0) {
final int flags = Canvas.HAS_ALPHA_LAYER_SAVE_FLAG;
if (drawTop) {
canvas.saveLayer(left, top, right, top + length, null, flags);
}
if (drawBottom) {
canvas.saveLayer(left, bottom - length, right, bottom, null, flags);
}
if (drawLeft) {
canvas.saveLayer(left, top, left + length, bottom, null, flags);
}
if (drawRight) {
canvas.saveLayer(right - length, top, right, bottom, null, flags);
}
} else {
scrollabilityCache.setFadeColor(solidColor);
}
// Step 3, draw the content
if (!dirtyOpaque) onDraw(canvas);
// Step 4, draw the children
dispatchDraw(canvas);
// Step 5, draw the fade effect and restore layers
final Paint p = scrollabilityCache.paint;
final Matrix matrix = scrollabilityCache.matrix;
final Shader fade = scrollabilityCache.shader;
if (drawTop) {
matrix.setScale(1, fadeHeight * topFadeStrength);
matrix.postTranslate(left, top);
fade.setLocalMatrix(matrix);
canvas.drawRect(left, top, right, top + length, p);
}
if (drawBottom) {
matrix.setScale(1, fadeHeight * bottomFadeStrength);
matrix.postRotate(180);
matrix.postTranslate(left, bottom);
fade.setLocalMatrix(matrix);
canvas.drawRect(left, bottom - length, right, bottom, p);
}
if (drawLeft) {
matrix.setScale(1, fadeHeight * leftFadeStrength);
matrix.postRotate(-90);
matrix.postTranslate(left, top);
fade.setLocalMatrix(matrix);
canvas.drawRect(left, top, left + length, bottom, p);
}
if (drawRight) {
matrix.setScale(1, fadeHeight * rightFadeStrength);
matrix.postRotate(90);
matrix.postTranslate(right, top);
fade.setLocalMatrix(matrix);
canvas.drawRect(right - length, top, right, bottom, p);
}
canvas.restoreToCount(saveCount);
// Step 6, draw decorations (scrollbars)
onDrawScrollBars(canvas);
}
draw方法分成了6个步骤：
/*
* Draw traversal performs several drawing steps which must be executed
* in the appropriate order:
*
* 1. Draw the background
* 2. If necessary, save the canvas' layers to prepare for fading
* 3. Draw view's content
* 4. Draw children
* 5. If necessary, draw the fading edges and restore layers
* 6. Draw decorations (scrollbars for instance)
*/
第三部, Draw view's content步骤调用了onDraw方法，子类中实现onDraw方法。
第四步，Draw children步骤使用的dispatchDraw方法，这个方法在ViewGroup中有实现。
View或ViewGroup的子类不用再重载ViewGroup中该方法，因为它已经有了默认而且标准的view系统流程。dispatchDraw()内部for循环调用drawChild()分别绘制每一个子视图，而drawChild()内部又会调用draw（）函数完成子视图的内部绘制工作。
/**
* {@inheritDoc}
*/
@Override
protected void dispatchDraw(Canvas canvas) {
final int count = mChildrenCount;
final View[] children = mChildren;
int flags = mGroupFlags; if ((flags & FLAG_RUN_ANIMATION) != 0 && canAnimate()) {
final boolean cache = (mGroupFlags & FLAG_ANIMATION_CACHE) == FLAG_ANIMATION_CACHE; final boolean buildCache = !isHardwareAccelerated();
for (int i = 0; i < count; i++) {
final View child = children[i];
if ((child.mViewFlags & VISIBILITY_MASK) == VISIBLE) {
final LayoutParams params = child.getLayoutParams();
attachLayoutAnimationParameters(child, params, i, count);
bindLayoutAnimation(child);
if (cache) {
child.setDrawingCacheEnabled(true);
if (buildCache) {
child.buildDrawingCache(true);
}
}
}
} final LayoutAnimationController controller = mLayoutAnimationController;
if (controller.willOverlap()) {
mGroupFlags |= FLAG_OPTIMIZE_INVALIDATE;
} controller.start(); mGroupFlags &= ~FLAG_RUN_ANIMATION;
mGroupFlags &= ~FLAG_ANIMATION_DONE; if (cache) {
mGroupFlags |= FLAG_CHILDREN_DRAWN_WITH_CACHE;
} if (mAnimationListener != null) {
mAnimationListener.onAnimationStart(controller.getAnimation());
}
} int saveCount = 0;
final boolean clipToPadding = (flags & CLIP_TO_PADDING_MASK) == CLIP_TO_PADDING_MASK;
if (clipToPadding) {
saveCount = canvas.save();
canvas.clipRect(mScrollX + mPaddingLeft, mScrollY + mPaddingTop,
mScrollX + mRight - mLeft - mPaddingRight,
mScrollY + mBottom - mTop - mPaddingBottom); } // We will draw our child's animation, let's reset the flag
mPrivateFlags &= ~PFLAG_DRAW_ANIMATION;
mGroupFlags &= ~FLAG_INVALIDATE_REQUIRED; boolean more = false;
final long drawingTime = getDrawingTime(); if ((flags & FLAG_USE_CHILD_DRAWING_ORDER) == 0) {
for (int i = 0; i < count; i++) {
final View child = children[i];
if ((child.mViewFlags & VISIBILITY_MASK) == VISIBLE || child.getAnimation() != null) {
more |= drawChild(canvas, child, drawingTime);
}
}
} else {
for (int i = 0; i < count; i++) {
final View child = children[getChildDrawingOrder(count, i)];
if ((child.mViewFlags & VISIBILITY_MASK) == VISIBLE || child.getAnimation() != null) {
more |= drawChild(canvas, child, drawingTime);
}
}
} // Draw any disappearing views that have animations
if (mDisappearingChildren != null) {
final ArrayList<View> disappearingChildren = mDisappearingChildren;
final int disappearingCount = disappearingChildren.size() - 1;
// Go backwards -- we may delete as animations finish
for (int i = disappearingCount; i >= 0; i--) {
final View child = disappearingChildren.get(i);
more |= drawChild(canvas, child, drawingTime);
}
} if (debugDraw()) {
onDebugDraw(canvas);
} if (clipToPadding) {
canvas.restoreToCount(saveCount);
} // mGroupFlags might have been updated by drawChild()
flags = mGroupFlags; if ((flags & FLAG_INVALIDATE_REQUIRED) == FLAG_INVALIDATE_REQUIRED) {
invalidate(true);
} if ((flags & FLAG_ANIMATION_DONE) == 0 && (flags & FLAG_NOTIFY_ANIMATION_LISTENER) == 0 &&
mLayoutAnimationController.isDone() && !more) {
// We want to erase the drawing cache and notify the listener after the
// next frame is drawn because one extra invalidate() is caused by
// drawChild() after the animation is over
mGroupFlags |= FLAG_NOTIFY_ANIMATION_LISTENER;
final Runnable end = new Runnable() {
public void run() {
notifyAnimationListener();
}
};
post(end);
}
}
上面基本介绍完了View的绘制流程。更多的细节需要在日常学习中总结。
*/
参考：
http://developer.android.com/guide/topics/ui/how-android-draws.html
http://www.2cto.com/kf/201312/267855.html
Android View绘制过程的更多相关文章
- Android View 绘制过程
Android的View绘制是从根节点(Activity是DecorView)开始,他是一个自上而下的过程.View的绘制经历三个过程:Measure.Layout.Draw.基本流程如下图: per ...
- 简单研究Android View绘制三 布局过程
2015-07-28 17:29:19 这一篇主要看看布局过程 一.布局过程肯定要不可避免的涉及到layout()和onLayout()方法,这两个方法都是定义在View.java中,源码如下: /* ...
- Android UI 绘制过程浅析（五）自定义View
前言 这已经是Android UI 绘制过程浅析系列文章的第五篇了,不出意外的话也是最后一篇.再次声明一下,这一系列文章,是我在拜读了csdn大牛郭霖的博客文章<带你一步步深入了解View> ...
- 简单研究Android View绘制一 测量过程
2015-07-27 16:52:58 一.如何通过继承ViewGroup来实现自定义View?首先得搞清楚Android时如何绘制View的,参考Android官方文档:How Android Dr ...
- Android UI 绘制过程浅析（一）LayoutInflater简介
前言 这篇blog是我在阅读过csdn大牛郭霖的<带你一步步深入了解View>一系列文章后,亲身实践并做出的小结.作为有志向的前端开发工程师,怎么可以不搞懂View绘制的基本原理——简直就 ...
- Android UI 绘制过程浅析（三）layout过程
前言 上一篇blog中,了解到measure过程对View进行了测量,得到measuredWidth/measuredHeight.对于ViewGroup,则计算出全部children的宽高进行求和. ...
- View绘制过程理解
假期撸了几篇自定义View相关的东西,后两天下雨呆在家里还是效率太低Orz 每个Activity都包含一个Window对象,这个Window对象通常由PhoneWindow来实现[1],而每个Wi ...
- Android UI 绘制过程浅析（二）onMeasure过程
前言 View的绘制过程分为 measure.layout.draw三个步骤,接下来对这三个步骤逐一进行研究. measure方法的签名 public final void measure(int w ...
- Android View绘制流程
框架分析 在之前的下拉刷新中,小结过触屏消息先到WindowManagerService(Wms)然后顺次传递给ViewRoot(派生自Handler),经decor view到Activity再传递 ...
随机推荐
- 为什么说外卖O2O行业的未来在于尖端技术？
7月13日,百度公司董事长兼CEO李彦宏在发布会上谈及百度外卖时表示,百度外卖里有非常多的人工智能技术的应用,比如同样的商家订单,先配送后配送,时间路线规划等等,都有人工智能的技术,涉及机器学习的问题 ...
- 分析system_call中断处理过程
分析system_call中断处理过程 上周我们使用gcc内嵌汇编调用系统调用,这次我们具体分析下过程. 将getpid嵌入menuos 代码从github下载,步骤如下: 1. 增加一个函数,get ...
- Liferay7 BPM门户开发之33: Portlet之间通信的3种方式（session、IPC Render Parameter、IPC Event、Cookies）
文章介绍了5种方式,4种是比较常用的: Portlet session IPC Public Render Parameters IPC Event Cookies 参考地址: https://web ...
- Install MongoDB driver for PHP on XAMPP for Mac OSX
试了不少方法,最后还是这个最有效. [转自:http://thatsimplecode.com/install-mongodb-driver-for-php-on-xampp-for-mac-osx] ...
- [leetcode] Min Stack @ Python
原题地址:https://oj.leetcode.com/problems/min-stack/ 解题思路:开辟两个栈,一个栈是普通的栈,一个栈用来维护最小值的队列. 代码: class MinSta ...
- jsnop
<script src="http://libs.baidu.com/jquery/1.6.1/jquery.min.js"></script> <d ...
- python排序算法的实现-选择
1.算法: 对于一组关键字{K1,K2,…,Kn}, 首先从K1,K2,…,Kn中选择最小值,假如它是 Kz,则将Kz与 K1对换: 然后从K2,K3,… ,Kn中选择最小值 Kz,再将Kz与K2对换 ...
- HLS视频点播&直播初探
前端可选的视频直播协议大致只有两种: RTMP(Real Time Messaging Protocol) HLS(HTTP Live Streaming) 其中RTMP是Adobe开发的协议,无法在 ...
- Android学习之Handler消息传递机制
Android只允许UI线程修改Activity里的UI组件.当Android程序第一次启动时,Android会同时启动一条主线程(Main Thread),主线程主要负责处理与UI相关的事件,如用户 ...
- WinForm数据源分页技术
1.编写分页存储过程 USE [Contacts]GO create procedure [dbo].[GetPageData] (@startIndex int,@endIndex int)asbe ...