NX二次开发-UFUN重命名工程图UF_DRAW_rename_drawing

 NX9+VS2012

 #include <uf.h>
 #include <uf_draw.h>
 #include <uf_part.h>

 UF_initialize();

 //新建工程图(A4图纸)
 char* DrawingName = "ABC";//设置图纸名字
 UF_DRAW_info_t DrawingInfo;//设置图纸大小、投影视角、视图比例等
 DrawingInfo.size_state = UF_DRAW_METRIC_SIZE;//设置图纸类型
 DrawingInfo.size.metric_size_code = UF_DRAW_A4;//设置图纸大小
 DrawingInfo.drawing_scale = 1.0;//设置比例
 DrawingInfo.units = UF_PART_METRIC;//设置单位
 DrawingInfo.projection_angle = UF_DRAW_FIRST_ANGLE_PROJECTION;//设置投影视角
 tag_t DrawingTag = NULL_TAG;
 UF_DRAW_create_drawing(DrawingName, &DrawingInfo, &DrawingTag);

 //新建工程图(自定义大小)
 char* DrawingName1 = "EDF";//设置图纸名字
 UF_DRAW_info_t DrawingInfo1;//设置图纸大小、投影视角、视图比例等
 DrawingInfo1.size_state = UF_DRAW_CUSTOM_SIZE;//设置图纸类型
 DrawingInfo1.size.custom_size[] = ;//设置图纸高度
 DrawingInfo1.size.custom_size[] = ;//设置图纸长度
 DrawingInfo1.drawing_scale = 1.0;//设置比例
 DrawingInfo1.units = UF_PART_METRIC;//设置单位
 DrawingInfo1.projection_angle = UF_DRAW_FIRST_ANGLE_PROJECTION;//设置投影视角
 tag_t DrawingTag1 = NULL_TAG;
 UF_DRAW_create_drawing(DrawingName1, &DrawingInfo1, &DrawingTag1);

 //打开工程图
 UF_DRAW_open_drawing(DrawingTag1);

 //重命名工程图
 UF_DRAW_rename_drawing(DrawingTag1, "LSY");

 UF_terminate();